Best Attic Insulation Tools

Radiant Barrier RadiantGUARD Classic Attic Insulation 1000 sq ft | 48-inch by 250-feet | C-1000-B | Perforated Foil Radiant Barrier Insulation Roll Attic Foil Roof Barrier - Blocks 95% Heat

  • Lowers utility bills year round. This commercial grade highly reflective radiant barrier attic foil BLOCKs 95% of radiant heat gain and loss & keeps....
  • 1,000 square feet (28 pounds) - 250 linear feet BREATHABLE (perforated) DOUBLE-SIDED metalized poly radiant barrier insulation roll - Doesn't trap....
  • Industrialized strength perforated radiant barrier foil insulation is tear and puncture proof. Entire roll cuts easily with utility scissors or hack....
  • Non-toxic, non-carcinogenic, fiber free and maintenance free and does not require any special clothing or breathing masks to install unlike spray....
  • Class A / Class 1 (ASTM E-84) highest achievable safety fire rating therefore, meets fire and smoke requirements for most local, state and federal....
Check Stock

Maxx Air Professional Grade Gable Mount Power Attic Ventilator with 2.6-Amp 60-Hz Motor and 14-Inch Blade

  • VENTILATOR FAN: This is a 1300 CFM Power Attic Gable Mount Ventilator with a 2.6 Amp thermally protected motor, a galvanized steel flange, and an automatic thermostat..
  • GABLE MOUNT ATTIC FAN: It mounts easily in the gable of your home, behind existing louvers or any other gable louvers of your choice. It will provide ventilation without modifying your roofline, or where roof-mounting is impractical..
  • ATTIC FAN: The Cool Attic Gable-Mount Attic Ventilator Fan offers effective power attic ventilation to reduce heat buildup, equalize temperatures inside and outside the attic. It has 14-inch fan with 600-square-inch intake. It is galvanized steel construction..
  • EASY INSTALLATION: It cools attic up to 1,850 square feet with a 2.6-amp, 115-volt, 60-Hz thermally protected motor, 1,300 CFM rating at 0.03 static pressure when used with model No. CX2121 automatic shutter. It helps keep your home cooler and reduce utility costs..
  • HOME ROOF COOLING FAN: This fan helps prevent weather-induced home deterioration and make living areas more comfortable - all while helping reduce the operating cost of air conditioning. Easy to install with no holes in roof required..
Check Stock

Maxx Air Professional Grade Gable Mount Power Attic Ventilator, Premium Attic Ventilation for Gable, Home, Shed, Portable Building (2500 Sq. Feet, Green)

  • VENTILATOR FAN: This is a 1650 CFM Power Attic Gable Mount Ventilator with a 2.6 Amp thermally protected motor, a galvanized steel flange, and an automatic thermostat..
  • GABLE MOUNT ATTIC FAN: It mounts easily in the gable of your home, behind existing louvers or any other gable louvers of your choice. It will provide ventilation without modifying your roofline, or where roof-mounting is impractical..
  • ATTIC FAN: The Cool Attic Gable-Mount Attic Ventilator Fan offers effective power attic ventilation to reduce heat buildup, equalize temperatures inside and outside the attic. It has 14-inch fan with 600-square-inch intake. It is galvanized steel construction..
  • EASY INSTALLATION: It cools attic up to 2,500 square feet with a 2.6-amp, 115-volt, 60-Hz thermally protected motor, 1,300 CFM rating at 0.03 static pressure when used with model No. CX2121 automatic shutter. It helps keep your home cooler and reduce utility costs..
  • HOME ROOF COOLING FAN: This fan helps make living areas more comfortable while helping reduce the operating cost of air conditioning. Easy to install with no holes in roof required..
Check Stock

Cool Attic CX1500UPS Power Gable Ventilator Fan

  • VENTILATOR FAN: This is a 1300 CFM Power Attic Gable Mount Ventilator with a 2.6 Amp thermally protected motor, a galvanized steel flange, and an automatic thermostat.
  • GABLE MOUNT FAN: It mounts easily in the gable of your home, behind existing louvers or any other gable louvers of your choice. It will provide ventilation without modifying your roofline, or where roof-mounting is impractical. It mounts easily in gable behind louvers.
  • ATTIC FAN: The Cool Attic Gable-Mount Attic Ventilator Fan offers effective power attic ventilation to reduce heat buildup, equalize temperatures inside and outside the attic. It has 14-inch fan with 600-square-inch intake. It is galvanized steel construction.
  • EASY INSTALLATION: It cools attic up to 1,850 square feet and 3.4-amp, 115-volt, 60-Hz thermally protected motor, 1,300 CFM rating at 0.03 static pressure when used with model No. CX2121 automatic shutter. It helps keep your home cooler and reduce utility costs.
  • HOME ROOF COOLING FAN: This fan helps prevent weather-induced home deterioration and make living areas more comfortable – all while helping reduce the operating cost of air conditioning. Easy to install with no holes in roof.
Check Stock

Ducting Pipe Non Return Valve, Round Duct Rigid Tube Connector with Shutter Extractor Fan Backdraft Damper Stopper (4\ Inch, Damper)

  • 26 Gauge Galvanized Steel, Single Wall with No Insulation.
  • Built with standard plaster ground flange all the way around the square portion..
  • Connects a 10" Round Duct to a 14" x 14" Diffuser or Register Vent..
  • The ceiling box is nailed into the attic rafters and plastered or dry walled around the flange called plaster ground..
Check Stock

Ventamatic XXDUOSTAT Adjustable Dual Thermostat/Humidistat Control for Power Attic Ventilators

  • THERMOSTAT/HUMIDISTAT CONTROL: The Dual Thermostat and Humidistat is designed for use with Power Attic Ventilators. The dual controls allow for a user to limit the operation of the fan based on user selected temperature and humidity levels..
  • ADJUSTABLE DUOSTAT: This item is often called a Duostat and is an essential tool for homeowners to regulate the temperature and humidity levels while preventing their power attic ventilator from running in continuous operation mode.
  • ENERGY EFFICIENT POWER ATTIC VENTILATOR: It provides energy-efficient operation of power attic ventilators and the temperature ranges from 50°F to 120°F..
  • DUAL HUMIDITY CONTROL: Adjustable Thermostat and Humidistat Control has 10 Amps, 120 Volts AC. Thermostat setting adjusts from 60 - 120 degrees F (normal settings are 85 - 110 degrees F). Humidistat setting adjusts from 30 - 90% (normal settings are 60 - 70% depending on local humidity levels). If either setting is too low, fan will run continuously. If setting is too high, ventilation will be inadequate. It has limited lifetime warranty..
  • REMOVAL OF HEAT: The Duostat allows for worry free operation during both winter and summer months by allowing the homeowner to not manually turn on and off their attic fan when needed. It remov....
Check Stock

Satco (8 Pack) Led Color Selectable Downlight Retrofits, Part Number S11836, 9 Watt; 5 Inch - 6 Inch; Cct Selectable; 120 Volts; Dimmable; Brushed Nickel Finish for Industrial and Commercial Use

  • New construction recessed can, ideal for those who have easy access to their ceilings.
  • For use in non-insulated ceilings or insulated ceilings where insulation is kept at least 3" from all sides of the recessed light fixture.
  • Air-Tite rated design meets restricted air flow code requirements which prevents airflow between attic and living areas and saves on both heating and air conditioning costs.
  • Q-Channel bars with Pass-N-Thru feature allows bars to cross-over for tool-less shortening in tight spaces less than 12 in. without removing from the plaster frame.
  • Pass-N-Thru bar hangers: Fixture has pre-installed nails that easily installs in regular lumber, engineered lumber, and laminated beams.
  • Compatible with a wide variety of 4 inch Recessed light trims but is best with Halo 999, 998, 993, 992, 990, 953, and 951 series models.
  • Compatible with a wide variety of 4 inch LED retrofit trims but is best with Halo quality RL, RA, SLD, LT, SMD, and ML series models (Bulb free with some having a 45 year LED lifespan).
  • High performance E26 Series 4 inch Recessed light trim options available.
  • Slide-N-Side Junction Box: connectors allow non-metallic sheathed cable for both U.S. and Canada to be installed without tools.
  • Socket bracket adjusts lamp to various tri....
Check Stock

HALO Recessed H36TAT Housing Non-Ic Air-Tite Shallow Ceiling 120-Volt Line Voltage,Green,197

  • Air-tite construction helps prevent air flow from the attic to the living space.
  • 3 in. aperture provides illumination for your general lighting needs.
  • Use for new construction where insulation will be kept 3 in. away from all sides of the housing.
  • Compatible with 120-Volt GU10 lamp (sold separately).
  • Pass-N-thru bar hangers for easy installation.
  • Slide-N-side junction box allows wiring connections to be made outside the box.
Check Stock

2 Pack LED Garage Lights, 12000LM Ultra Bright 120W LED Deformable Garage Ceiling Lights, with E26 Screw Socket, 5 Adjustable Panels 6500K Shop Light, Barn Light, Bay Light, Workshop Light

  • ...are color rendering Index of 85, it realistically renders the color of woodworks, paint, appear more accurately, bring the best lighting. Upgrade LED five glow daylight..
  • 【Durable & Long Service Life Led Ceiling Garage Light】Made of stable material, can fireproof, high temperature resistant, excellent electrical insulation, safe to use, hollow design, fast heat dissipation, light attenuation is only 7%, over 50,000 hours of constant runtime makes the maintenance cost sharply cut down..
  • 【Satisfactory service】We are committed to the continuous improvement of products and services and are always responsible. Buy with confidence! If you have any questions, please email us via Amazon..
Check Stock

H1499 4 in. Steel Recessed Lighting Housing for Remodel Shallow Ceiling, Low-Voltage, No Insulation Contact, Air-Tite

  • Air-Tite rated design meets restricted air flow code requirements which prevents airflow between attic and living areas and saves on both heating and air conditioning costs.
  • Has four remodel clips which secure the recessed housing and accommodates 1/2 in. and 5/8 in. ceiling material.
  • Compatible with a wide variety of 4 in. low-voltage recessed light trims but is best with Halo 1496, 1493, 1421, 1420 and 1419 series models.
  • NM cable pryouts and conduit knockouts in junction box.
  • Can be installed from below the ceiling in home remodel applications, ideal for those who have limited or no access to their ceiling.
  • For use in non-insulated ceilings or insulated ceilings where insulation is kept at least 3 in. from all sides of the recessed light fixture.
  • 3 "Quick Connect" connectors eliminate the need for separate wire nuts - simply strip supply wires and push in.
  • Listed for damp location when used with dedicated wet rated recessed ceiling lights.
  • Features an integral thermal protector to guard against misuse of insulation materials and improper lamping.
Check Stock