Best Atx Power Supplie

Zunate 945 M-ATX Gaming Motherboards, LGA 775 DDR2 Motherboard for Desktop Computer, with PCIE16 SATA/IDE Interface, Build in Network Card Sound Card

Micro ATX Architecture: The Motherboards size is 220 x 170mm M ATX Architecture, All solid State panels, good materials are preferred for long‑term durability..
Multi Phase Power Supply: The power supply has 24 pin and 4 pin interface, which is stable,accurate and evenly distributed, and the heat load of various power supply chipsets improves the performance of the CPU..
Various Expansion Interfaces: This computer motherboards support VGA , PCI and COM interface, DDR2 RAM, SATA/ IDE Interface..
Solid State Capacitors: Solid‑state capacitors have stable performance and greatly extend the life of the motherboard..
Built In PCI: This micro atx gaming motherboard has PCI‑E 16 slot, PCI slot is an expansion slot based on PCI local bus..

80 Plus Platinum: Runs cooler and uses less power than less efficient power supplies.
Fully Modular: Allows user to only use the cables they need for a cleaner looking build with better airflow.
10-year warranty: Backed by Corsair's legendary technical support and customer service.
135mm FDB fan with Zero RPM mode: Virtually silent operation at low loads,+12V Rail Switch: Gives the user the choice of a single +12V rail or....
ATX12V v2.4 and EPS 2.92 standards and is backward compatible with ATX12V 2.2, 2.31 and ATX12V 2.01 systems.

24PIN 90 ADAPTER: ATX 24PIN line adapter is specially designed to change the installation direction of ATX 24PIN line. ATX 24Pin female to male 90 degree power adapter is used for desktop computer power supply.
USAGE: The power adapter is installed by allowing the main power cord to be installed at a 90-degree angle, so it is no longer necessary to wind or fold the cable up and back on the motherboard, and reduce the number of cables required in front of the motherboard tray.
POWERFUL FUNCTION: This product will solve the PSU installation problem of the limited height chassis. It is suitable for desktop computer power supply. The product has an LED display adapter. There are normal power and standby LEDs to display the working status, which is easy to use at a glance.
NOTE: The adapter is only designed for a 24-pin port to improve the connection between the motherboard and the PSU. The adapter must be installed step by step to avoid pin short circuit and motherboard damage. Please unplug the power cord and wait 10 seconds before installation.
SHIPMENT AFTER QUALITY INSPECTION: Our products will be shipped after strict quality inspection. Due to long-distance transportation and distribution, various unpredictable situations may occur. If it is damaged or ....

Apevia RP500W Raptor 500W ATX Power Supply..
Connectors:1 x 20/24pin Main Power, 1 x 4pin 12V, 3 x SATA, 3 x Peripheral, 1 x 6+2-pin PCI-express, 1 x Floppy.
1 x Auto-Thermally Controlled Red 120mm Fan (No LED). 115/230V Switch.
Max. Output Current +3.3V(16A), +5V(16A), +12V(36A), -12V(0.3A), +5Vsb(2.5A).
Safety Protections. Standard ATX Size: 5.9″ x 5.5″ x 3.4″ (L x W x H).

Product introduction: 250 Watt Output 12 Volt DC Input,Fanless design, 100% silent,24 pin ATX connector, Plugs directly into the ATX connector,Perfect DC PSU for mini ITX Motherboards.
Working operation: Input voltage: +12V/DC(11.4-12.6V), DC input: 2.5mm inner diameters, 5.5mm outer diameter, Input Current: Max. 21A, Output Power: 250W, Power Efficiency: >= 85%, Working temperature/humidity: 15℃ to 35℃ / 45%-75%, Reposition temperature//humidity: -40℃ to +70℃/ 10%-90%, Atmospheric pressure: 86Kpa—106Kpa.
Strong durability: Adopt industrial solid capacitor, ideal for being used in harsh evironment, High performance with high heat-stand feature, more reliable, Solid Polymer Caps on the PCBA, Long life.
Wide range of applications: MINI computers, one computer, POS, digital set-top boxes, ITX chassis, network servers, advertising, banking terminals, etc.
Package includes: 1 x DC-ATX 250W Module (with cable).

ATX MOTHERBOARD TEST BENCH: It is a Nude building blocks frame, lightweight and convenient disassembly, which can be stacked..
DIY ASSEMBL: ATX computer open air frame easily assembling with the simple structure, you can fully experience the fun of DIY..
GREAT HEAT-DISSIPATION: Open frame design has good heat dissipation performance. Support ATX ordinary large power supply..
PREMIUM AND DURABLE: ATX motherboard test bench made of high-quality 20* 20 aluminum alloy, steady for use..
AFTER SALES SERVICE: If there are any using problems or unsatisfactory with our products, please feel free to contact us, our professional customer service team will reply you within 24 hours, and we will consult the issues with sincerity. Thanks for purchasing from us..

Our J&D EPS 8 Pin Power Extension Cable features one 8 Pin ATX 12V male connector and one 8 Pin ATX 12V female connector, extending your cable length from the power supply to the CPU motherboard by 12 inch.
With PVC flexible jacket, 18 AWG tinned copper wire ensures a dependable connection.
Lock connector design is adopted to prevent accidental disconnections.
This black extension cable is 12 inch in length, giving you enough cable slack within the computer case as well as a clean and neat look.
You can use it without upgrading the power supply.

[Easy Access] Front accessible expansion slot card ports and I/O components.
[Compatible] Enclosure supports all types of ATX motherboards (full-size ATX, microATX, miniATX) as well as the PS-2 ATX power supply or mini-redundant PSU (not included).
[Rack Mount] Mountable to any standard 19” server rack. Dimensions are 19″ x 4U x 15″ Deep.
[Features] Equipped with for 7 Drive Bays, 2 x 5.25″ and 6 x 3.5” (internal), 7 (full height) expansion slots, 1 x 120mm and 2 x 80mm fans included, power and reset switch, 2 x USB, LEDs for Power & HDD.
[Reliable] Constructed of a Heavy-Duty SGCC Steel (1.0 mm) and Aluminum (for handles) with industrial quality and ruggedness. No Assembly Required.