Best Auto Fuse Holder

Recoil 10 Pack 12V Car Add-a-Circuit Fuse Tap Adapter ATO ATC Blade Fuse Holder with 10pcs 10A,20A Fuses (FT1-10)

  • ATO ATC dual-slot blade fuse holder, stand up to 20A each slot, suitable for any vehicle with a standard fuse slot.
  • Provides one fuse holder to protect existing circuit and a second fuse holder to protect new circuit.
  • Easy installation of additional circuits without splicing or cutting.
  • Use when hardwiring or adding 12V radio, LED light strip, dash cam, GPS, backup camera or any other small electronic device that requires direct wiring into the fuse box.
  • Made from high quality materials, good bending performance, melting resistance and excellent electrical conductivity.
Check Stock

InstallGear 0/2/4 Gauge AWG in-Line ANL Fuse Holder with 150 Amp Fuse

  • LED WARNING INDICATOR: this fuse block with negative bus can easily identify & replace blown fuses immediately without guessing! The LED indicator lights up when a blown fuse is detected. It is both safe and easy for you to check and replace the blown fuse..
  • WIDE USE: This fuse block holder with ground is suitable for all vehicles with a 10-32 Volt DC power source. So it come with multi-function stickers for DIY your specific need, convenient for examination and repair, easy to troubleshoot in outdoor.
  • widely used in vehicle, car, marine , bus, ship, tanker, subway etc.
  • PREMIUM QUALITY: The 6 way fuse box with ground buss is crafted to perfection with the best quality materials and with special attention to detail so it can be incredibly efficient and durable. The fuse box has LED light indicators and a strong construction for guaranteed results.base:PBT,cap:PC,terminal:Nickel plated copper,screw:Stainless steel,label:PP*70.
  • EASY TO SET UP: No need to worry about getting your fuse box ready to use. This 6 circuit fuse box holder with ground is very easy to install..
  • WITH COVER AND FUSE: Transparent plastic cover with push latch system, easy to operate, splash and dust-proof design. Adds extra protection to your fuse box & fuses. With 12 pcs Blade fuse 2 ....
Check Stock

IN-LINE ANL FUSE HOLDER 4 WAY 1x0GA-4x4GA WITH FUSE DISTRIBUTION BLOCK STEREO/AUDIO/CAR

  • This 100Amp power distribution fuse holder is made out of high quality materials in order to get professional results from your car subwoofer audio system..
  • This fuse block holder designed for high performance car audio systems and other electrical high current applications. The power fuse compartment geared up with a heat-resistant acrylic covers and corrosive resistant materials such as gold-plated finish. The new style engineering design makes your installation safe and stylish..
  • Gold Plating Terminal Fuse Block, 4X100A Fuse Included..
  • Screw terminals hold cables securely in place,Fast and easy installation.
Check Stock

Fuse Mat and Holder by We R Memory Keepers

  • PROTECT YOUR WORK SURFACE: Durable silicone mat protects your work surface while working with the Photo Sleeve Fuse (sold separately)..
  • LARGE WORK SPACE: This spacious 12 x 12-inch mat is perfect for making custom photo sleeves of any size..
  • CONVENIENT FUSE HOLDER: The attached silicon holder allows you to put your Photo Sleeve Fuse (sold separately) down without turning it off. It’s easy! Just place the mat on the edge of your work surface with the holder hanging over the edge..
Check Stock

UNEEDE 10 Pack Fuse Inline Fuse Holder ATC/ATO Add-a-Circuit Car Fuse Holder TAP Adapter 16 Gauge 20AMP Blade Automotive Fuse Holder Waterproof Heavy Duty Wire Fuse Holder with 10 pcs 15 AMP Standard

  • SAFETY PROTECTION: Heavy duty 16 AWG fuse holder, great look and added protection to the circuit. And easy to add additional circuits for all cars, CD players, fax machines, etc.
  • SUITABLE FOR MUITILPLE FUSES: Fits for 1A, 2A, 3A, 4A, 5A, 7.5A, 10A, 15A, 20A ATC/ATO blade fuse.
  • WATERPROOF FUSE HOLDER: Unique design of dual slot tight-fitting waterproof lid to enhance moisture-proof and waterproof performance. It's no doubt that this is inline fuse holder extremely safe and reliable.
  • SUPERIOR QUALITY: High-quality materials ensure high fatigue resistance, melting resistance and excellent electrical conductivity which allows easy installation of additional circuits without cutting or spicing.
  • PACKAGE INCLUDE: 10 x 16AWG 5.9in ATC/ATO Blade Fuse Holder with 10 pcs 15AMP Standard fuses.
Check Stock

YUNPICAR Mini Blade Fuse Holder 18 AWG Waterproof Connector Inline Fuse Holder with 5A ATM Fuses,2 Pack

  • Standard ATS 5A Blade Fuse ,Protecting circuits and electrical equipment. Easy to add additional circuits fit for cars, CD players, fax machines and etc..
  • High-quality :Fuse holders wiring harness select Tin plated copper as conductor to ensure its good bending performance, melting resistance and excellent electrical conductivity..
  • Easy to use:Just directly plug to the existing fuse holder, 18 AWG 9.4in red pigtail wire allow you to cut and splice it into any project. Keep your car and electric device in a safe condition.
  • Waterproof design, the rubber cap fits on tightly to protect any standard blade fuse inside. To enhance moisture-proof and waterproof performance and NOT easy to fall off or let water in.
  • Package Included: 2 X Mini Blade Fuse Holder and 2 X 5A Mini Blade Fuse.
Check Stock

Kicker 46FHD Car 2-Way Mini ANL - AFS Fused Power Wire Distribution Block FHD

  • KICKER brass hardware uses Versa-Gauge connection points with oversized convex screws for rock-solid connections..
  • The wire receptacles work with most size wire for clean, sharp install and a negative-post adapter collar that locks into place for a tight grip..
  • The KICKER FHD Dual Fuse Holder accepts 1/0 – 8 AWG power cables and accommodates any size AFS fuse..
  • FHD AFS Fuse Holder, 1/0-8AWG in/out, Dual Fuse.
Check Stock

Magic source Inline 60A MANL Fuse Holder with 1ft 8 Gauge AWG Oxygen Free Copper Power Wire and O-Ring Copper Terminal to Protect Car Audio Amplifier from The Current (60A)

  • The Power Wire with O-ring Terminal can be Directly Connected to the Battery .Easy and Fast Installation.
  • The Interior Is Made of Copper, And The Cover is Made of High Strength, Nonperishable Industrial-grade Plastic..
  • Applicable to auto, boat or other vehicles, protect your audio system.
  • Package Included:1ft Copper Power Wire with O-ring Terminal and Inline MANL Fuse Holder with 60A mini Fuse.
Check Stock

Jamgoer 12-Slot Relay Fuse Block Holds 6 ATC/ATO and 6 Relays Universal Waterproof Fuse Relay Box with 5 Relays and Metallic Pins Spade Terminals for Automotive Marine Boat Truck Engine Bay

  • →[Large Capacity Holder Box]: Automotive relay fuse block, tightly holds up to five 5-pin relay and one 4-pin Relays, and 6 ATC/ATO blade Fuses. You can get a relay fuse box with 5 relays and metallic pins and spade terminals..
  • →[Elegant & Durable]: Waterproof relay box has flame retardant shell, durable and safe, with precise cutouts of each slots and reserved an Arc-outlet on the edge, it keeps all your wiring tidy and good look..
  • →[EASY INSTALLATION]: Please add rubber pad yourself to level out the box with DIY installation. THE unique mounting legs help the box setting on most of interior auto surface..
  • →[2 Clip-Locks Cover]: Easy access securely and keep them in place, allowing you to quickly maintain or replace the burnt one, also can protection from water splashes, dust and debris..
  • →[Universal Fitment]: Fuse relay box suitable for ALL vehicles,Offroad Jeep SUV UTV ATV RV Pickup Truck Trailer Camper Marine Boat, etc..
Check Stock

6-Way Fuse Block with Ground, 6 Circuit ATC/ATO Fuse Box Holder with Negative Bus, Protection Cover & LED Light Indication, Bolt Terminals, 70 pcs Stick Label, for Auto Marine, Boat,

  • LED WARNING INDICATOR: this fuse block with negative bus can easily identify & replace blown fuses immediately without guessing! The LED indicator lights up when a blown fuse is detected. It is both safe and easy for you to check and replace the blown fuse..
  • WIDE USE: This fuse block holder with ground is suitable for all vehicles with a 10-32 Volt DC power source. So it come with multi-function stickers for DIY your specific need, convenient for examination and repair, easy to troubleshoot in outdoor.
  • widely used in vehicle, car, marine , bus, ship, tanker, subway etc.
  • PREMIUM QUALITY: The 6 way fuse box with ground buss is crafted to perfection with the best quality materials and with special attention to detail so it can be incredibly efficient and durable. The fuse box has LED light indicators and a strong construction for guaranteed results.base:PBT,cap:PC,terminal:Nickel plated copper,screw:Stainless steel,label:PP*70.
  • EASY TO SET UP: No need to worry about getting your fuse box ready to use. This 6 circuit fuse box holder with ground is very easy to install..
  • WITH COVER AND FUSE: Transparent plastic cover with push latch system, easy to operate, splash and dust-proof design. Adds extra protection to your fuse box & fuses. With 12 pcs Blade fuse 2 ....
Check Stock