Orifice size 1.1 mm, Male NPT screw fitting, about 1/4 inch. Working Pressure is up to 3000 PSI..
If foam cannon works not very well as before, maybe orifice tip damaged or blocked. You can replace with new one and it will recover..
Include 2 pieces of high replacement foam generator nozzles for snow foam lance. Made of brass, work durably in the foam cannon..
If you have questions, contact us at any time. We provide a service of quick reply within 24 hours. Welcome to RIDGE WASHER to see other pressure washer accessories..
Tool Daily Pressure Washer Foam Cannon for Car Wash, Snow Foam Lance, Additional Orifice Nozzle 1.1mm, 1/4 Inch
Tool Daily 1/4" quick disconnection Foam Cannon with white container bottle and additional orifice nozzle 1.1 mm for foam sprayer. Container bottle has bigger mouth to easily fill in and extra-wide neck to prevent crack issue..
EASY to install: fill some soap into the bottle with warm water to get thick foam.
Then connect 1/4" quick connection plug to Pressure Washer Gun or Wand. Specification for Pressure Washer: 1000 PSI to 3600 PSI. Finally, adjust the knob to desired foam level and then Snow Foam Lance will disperse thick foam..
Additional orifice nozzle: Backup foam cannon orifice nozzle attachs. 1.1mm orifice nozzle create thicker foam than original one below 2500 PSI. Please use original nozzle if working pressure is higher than 2500 PSI..
Application: ideal for Motorcycle, Car Washing.
floors, Windows washing, it is best product for Detailing Trucks or SUVs.
Correlation: hot release no tips bucket filter sealant wax blaster free garden jet wash plastic generation warmer care using ounce design cans turn vehicle maker temp floor variable remover guy tank products enthusiast connectors powder device brush mix black way gpm it sfl bubble truck be wall dispenser mixing chemical container duty brass max tip machines f....
Tool Daily Sewer Jetter Kit for Pressure Washer, 1/4 Inch NPT x 100 FT Hose, Sewer Jetting Nozzle Button Nose, Orifice 4.0, 4400 PSI
Sewer jetting kit contains sewer jet hose, button nose sewer jet nozzle, M22 female to 1/4’’ female NPT coupler and 1/4’’ quick connect plug..
Sewer jetting hose has inner tube, reinforcement and cover. Inner tube is made of thermoplastic polyester. Reinforcement layer is 1/4″ high tenacity polyester textile braid which is chemically bonded. Cover layer is made of thermoplastic polyurethane, which can resist weather, oil, abrasion and ozone..
Sewer jetting hose is ISO 9001 Certified and pin test each crimp to confirm proper internal crimp..
Button nose sewer jet nozzle: 1 front jet at 0° that clears blockages in the clogged pipe. 3 rear jets at 33° flush out debris loosened by the front jet. It is easy to slide into sewer lines and drain pipes. The jets move the nozzle through the pipe and provides an even cleaning. Ideal for flushing debris or cleaning fixed pipes when connect to a sewer jetter hose. Orifice 4.0..
The sewer jet hose can connect to pressure washer gun or wand with 1/4’’ quick connect plug. It also can connect to pressure washer pump (water outlet) with coupler attached (M22 female to 1/4’’ female NPT coupler)..
Goss KX-15MC Soldering Brazing Torch Kit for \MC\ Acetylene Tanks Includes GA-8L Ignitor Tip with Turbine Flame
and 3/16-inches by 12-feet A x A red hose.
Durable, long-life design crafted from strong 304 stainless steel tube stock and designed to stand up in the field.
Quality, precision manufacturing for consistent production and each tip is tested to ensure a perfect orifice and again to ensure flame quality.
Hottest tip, everytime based on exacting standards to eliminate irregular heating, "horns" and other inconsistencies.
Proof positive - the perfect flame - the tips are configured to produce reliable and repeatable flame performance and are evaluated using thermal photography techniques.
Orifice 3.5. Minimum Flow Rate: 3 GPM. Minimum Pressure: 3000 PSI. Please check image 4 to choose the size of orifice. If you need orifice 2.5, please order “Tool Daily Pressure Washer Sandblasting Kit, Wet Sand blaster Attachment, 2500 PSI”..
The pressure washer sandblasting attachments have a goggle, 10’ hose, 16’’ pressure washer wand (water input), 17’’ sand wand (sand input) and two hose clamps..
Replacment Nozzles are available. Product “Tool Daily Pressure Washer Sandblasting Nozzle, Replacement Wet Sand blaster Attachment, 5000 PSI, 2-Pack”. Working pressure of pressure washer sand blaster attachment is up to 5000 PSI. Temperature is up to 140°F/60℃..
Application: pressure washer sand blaster kit works for abrasive cleaning. Great for removing rust, graffiti, paint, baked on grease..
Pressure washer sand blasting attachments use dry silica sand, baking soda or washed and dried river sand..
TIG Welding Torch WP-17V 13ft 150Amp Air Cooled Lift TIG Torch for YESWELDER MIG-205DS MIG-250PRO MIG Welder ARC-205DS Stick WELDER
[UPDATED] A brand new Lift Tig gun with anti-aging rubber, outer woven material..
[APPLICATIONS] For YESWELDER MIG-250PRO MIG Welder, MIG-205DS MIG Welder and ARC-205DS Stick Welder..
2. Accesories: 10N50 Alumina Ceramic Cup #4 (1/4" orifice)//10N49 Alumina Ceramic Cup #5 (5/16" orifice)//10N48 Alumina Ceramic Cup #6 (3/8" orifice)//10N25 Collet 1/8"(3.2mm)//10N23 Collet 1/16"(1.6mm)//10N24 Collet 3/32"(2.4mm)//10N28 Collet Body 1/8"(3.2mm)//57Y02 Long Back Cap//57Y04 Short Back Cap..