Best Auto Setup Mast

JessEm 02120 Mast-R-Lift II Router Lift with Top Plate and 10-Piece Insert Ring Kit with Caddy for Router Plates and Lift Systems (2 Items)

  • Bundle Includes: JessEm 02120 Mast-R-Lift II Router Lift with 9-1/4-inch by 11-3/4-inch Top Plate and JessEm 10-Piece Insert Ring Set with Caddy for Router Plates and Lift Systems.
  • Built-In Locking Mechanism: Mast-R-Lift II has a built-in locking mechanism from above the table. Using the same handle you raise and lower your router lift, a simple turn and you are ready for those heavy-duty, long term routing operations.
  • Compatibility: With a standard top plate, Mast-R-Lift II fits routers with 9-1/4-inch by 11-3/4-inch base using a unique adjustable clamping block system.
  • Sturdy Construction: Mast-R-Lift II top plate is hard anodized. Hard anodizing is an engineered surface treatment providing a thick abrasion resistant coating and not just a cosmetic treatment that will wear off.
  • Lift Shafts: The lift shafts are hydraulically pressed into a larger diameter mount. Attaching the shaft mount to the top plate spreads the lateral load, providing a very rigid and durable mount, standing up to the toughest of routing operations.
Check Stock

Gigabit Wireless Bridge Point to Point Outdoor, 5.8G 1Gbps ULNA WiFi Bridge CPE with 16dBi High-gain Antenna, Long Range Up to 3km, 27dBm, 24V POE Power, Ip65 Waterproof, 2-Pack

  • ...es such as: gaming consoles, Windows, Android, Apple, iPhone and Smart TVs, internet radios and more. There are also two available Ethernet jacks on the CC Vector for hard wiring additional computers or routers. It uses the most popular long distance 2.4 GHz WiFi band. It also supports 5 GHz for shorter ranges. The setup is simple and easy for basic computer users plus you have U.S. based support by C. Crane..
  • The CC Vector Long Range is typically capable of supporting two users watching SD quality Netflix or several users browsing the internet simultaneously. As distance is increased, speed is reduced..
  • Includes the CC DX Mile Long Range WiFi Receiver, CC Vector WiFi Repeater, AC Power Adapter, 30' USB Split Cable, Stainless Steel hardware for mounting, Sealant and Silicone Grease. Mast not included..
Check Stock

Antenna Chimney Mount Y Type Antenna Mast 12' FT Stainless Steel Straps 1 Pair Set of 2 Heavy Duty Install Kit, Complete Outdoor Antenna Aerial Chimney Mounting Hardware

  • (2) 12' FT Stainless Steel Chimney Straps.
  • Put bracket on chimney and run strap round chimney, being careful not to twist it. Install brackets as far apart as possible, 20 % of mast length is suggested..
  • Pull strap tight around chimney. Be sure the strap is evenly placed around the chimney..
  • Install antenna mast. Use guy wire if mast length is excessive..
Check Stock

NOVA Medical Products Overbed Tilt Position Table with Locking Swivel Wheels, Easy Adjustable Bedside Tilt Table, Quick and Easy Assembly

  • The mast of the table pivots and can be locked in one of the three positions from flat on the floor to 90-degrees.
  • The pivot feature allows the table top to be positioned closer to individuals in a bed, sitting in a wheelchair, or folded for storage.
  • The tabletop tilts with the angle of the mast to provide a flat surface regardless of the angle of the mast.
  • Tabletop Dimensions: 15.75"(D) x 23.5"(W) x 28"-37"(H).
Check Stock

Dual Electronics MANT16W Durable Mast Long Range Marine Radio Antenna White

  • Improved performance & range – Your new extended flexible mast and long-range marine antenna was made with a full-length metal internal antenna and Motorola radio connector providing you with a range of up to 10 miles for all marine band frequencies.
  • Upgraded durability – the advanced flexible mast of your marine radio antenna provides exceptional sound quality while withstanding what the elements have to offer.
  • Corrosion resistant design – the enhanced sealed rubber exterior ensures your marine antenna will not succumb to Salt and spray for excellent reception and longevity.
  • Abundant mounting options – the unique design incorporates a 180-degree swivel base and a 54-inch cable which permits easy mounting in any location in no time.
  • 2 year – high quality and reliability with hassle-free parts and labor with excellent customer service.
  • Dimensions – 16-Inch mast and 54-inch cable.
Check Stock

Wdwlbsm Double Antenna Mast Clamp V Jaw Block with U Bolts|Heavy Duty Anti-Rust Mast to Mast Mount Bracket Kit for TV,CB,Ham,Pipe,Flag Pole,Hold Umbrella Parasols for Deck Railing,Fence(2 Set)

  • 【WE MAKE DIFFERENT】Compare with other styles, We provide two claw hand screw nuts to make it easier and faster for you to install..
  • 【DOUBLE PIPE-MOUNTING】The antenna pipe clamp kit is great for mounting round pipe(pole) to another round pipe(pole),the diameter range of round pipe is 1 - 1.8"..
  • 【JAW BLOCKS MAKE IT MORE STABLE】Antenna mast clamp kit uses jaw blocks with U bolts(2 " in distance, 5.5 " in length) to give a stronger install for ensuring the pole not slip down..
  • 【WIDELY USED】This mast mounting clamp is designed to support most WiFi, PCS, Cellular, TV antennas, Ham, flag post, torches, fishing rods, patio umbrella, parasols. It allows you to vary the mounting pipe length..
  • 【MATERIAL】Heavy duty mast to mast mounting hardware is made from Zinc-Plated Steel with anti-rust coating finish..
Check Stock

Chimney Mount Y Type Antenna Mast 18' FT Chimney Straps Install Kit, Complete Outdoor Off-Air Antenna Aerial Chimney Mounting Hardware, Stainless Steel Straps

  • (2) "Y" Chimney Straps (2) 17'-6" FT Stainless Steel Chimney Straps Made of 1.25" wide - 12 gauge galvanized steel.
  • Put bracket on chimney and run strap round chimney, being careful not to twist it. Install brackets as far apart as possible, 20 % of mast length is suggested. Feed free end of strap through. Pull strap tight around chimney. Be sure the strap is evenly placed around the chimney. Apply strap clamps. Tighten to secure straps around chimney. Install antenna mast. Use guy wire if mast length is excessive..
Check Stock

WQQBFF Wireless Android Auto Car Adapter,Android Phones Converts Wired Android Auto to Wireless - Direct Plug-in Type-c Adapter, Android Auto Wireless Adapter AI Box for Car with OEM(Black)

  • ...one also supports Android Auto. It is recommended to use the system version of Android 11 and above..
  • ️Easy to Use:We makes the connection fast and easy in just 3 simple steps. Just plug and play, no need for any extra drive or installation application. After the first setup, our adapter will automatically activate the Android Auto wireless connection every time the car starts. Enjoy setup it up once and for all..
  • ️Sleek and Compact Design:The lightweight sleek design of this car adapter makes it compact and easy to carry around without taking up too much space in your car. Includes a USB to Type-c adapter, so it can support both USB and Type-c car port access..
  • ️Professional Customer Service:High-end quality at a reasonable price--save some money without compromising performance! 12 months after-sale service and friendly customer service such as within 24Hrs response E-mail support for troubleshooting. We manufactured under strict quality standards to ensure that our customers get the best quality experience..
Check Stock

JessEm Rout-R-Table Stand Bundle with JessEm Phenolic Mast-R-Top 24 x 32-Inch Router Table Top, Mast-R-Fence II Router Table Fence and JessEm Rout-R-Lift II Router Lift (4 Items)

  • Bundle Includes: JessEm Rout-R-Table Stand, JessEm Phenolic Mast-R-Top 24 x 32-Inch Router Table Top, JessEm Mast-R-Fence II Router Table Fence, JessEm Rout-R-Lift II Router Lift for Porter Cable, Dewalt and Bosch Routers with 3.5-Inch Diameter Motors.
  • Aluminum Dual Track: The JessEm Mast-R-Top comes with an extruded anodized aluminum dual track with a T-slot that accepts standard 1/4-inch hex head bolts or hex nuts and a standard 3/4-inch miter slot.
  • Router Table System: The table top comes pre-machined to fit JessEm’s Mast-R-Lift, Rout-R-Lift II, and Rout-R-Plate lift and router plates for building a router table system.
  • Premium Material: Made from laminated phenolic, which is one of the strongest, stable, and durable materials available for an industrial strength work surface.
  • Compatibility: The Table Top features a centered router opening measuring 9-1/4 x 11-3/4 inches that accepts most standard router plates and lifts (3/8-inch thick).
Check Stock

Chinook Windsurf Mast Extension - Standard Diameter (Aluminum - 28 cm)

Check Stock