Best Automatic Shutdown Mode

Ollny Solar String Lights Outdoor IP67 Waterproof 8 Lighting Modes with 3 Timer Total 600 LED Cool White

  • ...under 15cm to 1m deep of water. Ideal for any outdoor or indoor lighting, you can use these patio lights outdoor to embellish your party, camping, gardens, fence, Christmas Trees, and Weddings..
  • ✨【8 Modes and Memory Function】These solar fairy lights have the On/Off button and mode button and a memory mode that automatically turns on to previous settings. you can select and press the “mode” button on the back of the solar panel to cycle through 8 lighting effects, including steady on, in waves, sequential, slow-glow, chasing flash, fade, twinkle flash, and combination..
  • ✨【3 Timer Function & Using Tips】There are 3 different Timer Settings! you can set the outdoor string light to light up after 6 hours, Automatic shutdown after 6 hours, and Switching lighting modes won't affect the timer function either. Using Tips: 1. Make sure the solar string light is on before using it. 2. Tear off the film covering the solar panel before using..
  • ✨【Easy to Install and Upgraded Solar Powered Lights】These solar garden lights are easy to install and use, automatic switch on/off, automatically turn on at dusk and off at dawn. The solar panel can be staked in the ground or mounted somewhere with optimal sunshine. This set of upgraded solar lights ....
Check Stock

Mxmoonfree 500N Digital Force Gauge Push Pull Gauge Portable Force Meter with Units N/ LB/ Kg/ Oz, Storage Case, Auto Backlit LCD, Auto Power-Off (ZMF-500N)

  • 4 MEASUREMENT UNITS - The portable digital force gauge can switch between 4 units of N / Lb / kg / Oz.
  • 3 MEASUREMENT MODES - This pull gauge can switch three measurement modes (Real-time / PEAK / First-PEAK). In "PEAK" mode, it can hold the maximum force applied shown on the screen..
  • AUTO POWER OFF - The push pull scale can set the automatic shutdown time and automatically shut down without operation for a long time to achieve the effect of power saving. The auto shutdown time can be set within 0-15 minutes, and the default time is 10 minutes..
  • MIN FORCE SHIELDING - The dynamometer can be set to shield the display of data below 0.5% of the full scale. This function can be cancelled, and the instrument defaults to enable the minimum force shielding function..
  • APPLICATION - The handheld force gauge is widely applied in pull push load testing, insertion force or destructive experiment and industry like electric, hardware, automobile parts, lighter and ignition system, light industry, mechanical, textile....
Check Stock

JOYO Guitar Tuner Clip on Digital Electronic Tuner for Guitar, Bass, Ukulele, Violin, Mandolin, Banjo Acoustics Calibration Tuner (JT-01)

  • Directly sold by manufacturer of JOYO Technology Co.,LTD which established at 2006..
  • Environmentally friendly ABS plastic applications, no inferior materials. FCC and CE certification, lead-free certification..
  • Highly sensitive tuner, metronome beat mode, ideal for noisy environments, suitable for music teachers, professional and junior players..
  • Variety of tuning: 6 C standard pitch bass and string instruments, guitar, bass, ukulele, violin, tuning range: OA (27.5Hz) -8C (4186.01Hz)..
  • Easy to read and operate, clear LCD digital display, easy to read, automatically shut down if not operated, automatic shutdown within 5 minutes..
Check Stock

AEKAN Micro Landscape Humidifier, 460ml Cool Mist Small Humidifier, USB Quiet Operation Desktop Humidifiers for Bedroom Travel Office Home, 2 Mist Modes (green)

  • ...travel, bedroom, office, effectively moisturize dry skin and help you reduce skin peeling, nose bleeding..
  • USB Only: Without battery. The USB is compatible with the USB port of any device,safe and easy to use..
  • Two Spray Modes and automatic shutdown: Continuous spray & intermittent spray. Click the spray button for the first time to activate continuous spray mode. Click the spray button a second time, switch to the intermittent spray mode, click the spray button for the third time, turn off the spray. In continuous mode, it will automatically turn off after 4 hours. In intermittent mode, it will automatically turn off after 6 hours. It will shut down when the water level is low..
  • Vivid and colorful circulating lights and luminous: This cool mist humidifier has a vivid and colorful setting of circulating lights to create a tranquil atmosphere while providing soothing fog. It provides you with maximum relaxation. Night lights can improve your sleep quality..
  • KIND REMINDER: ①Do not use essential oils, perfume, distilled water, which will cause the cotton swab to clog and the Hum....
Check Stock

50W LED RGB Floodlight with Bluetooth App Control Timer Dimmable Color Changing Warm/Cold White RGBW Floodlight, Up to 16 Million Colors and 20 Flashing Modes for Outdoor/Indoor Festival Decoration

  • ...hanging its color with the rhythm of your music ! Music Sync-in Mode is a perfect mode for stage or party ! You can not only use this RGB light in your party but also use the 2700k warm white & 5700k cold white light color for your daily use..
  • Timer ON/OFF Features, accurate to every minute:You can set the time of automatic shutdown via “timer off” when the RGB floodlight is working. Also, you can turn it on automatic when the night comes. All the timer setting are accurate to every minute !.
  • Supprt Group Control:You can creat a group to control when you need multiple RGB floodlight working together. Group control can make your floodlights output brighter luminance ! It’s a practical feature for stage, party or other occasions that you need..
Check Stock

BIGTREETECH TFT35 V3.0 Graphic Smart Display Controller Board for 3D Printer Ramps 1.4 RepRap 3D Printer Can Select Two Work Modes

  • 1.Upgrade the firmware by SD card. It is easy and convenient to operate.This display board has higher compatibility. Users can select two work....
  • 2.Serial port screen mode supports two printing modes: SD card and U disk..
  • 3.Reserve WIFI port, and WIFI function is realized by external WIFI module.
  • 4.Reserve the extension port of filament breaking detection (FIL-DET).
  • Reserve the extension port of automatic shutdown after printing (PS-ON).
  • 5.2 sets of UART serial port extension ports are reserved for DIY use..
Check Stock

Baby Bath Thermometer Floating Toy, BabyElf Rubber Duck Thermometer for Infants, Water and Room Safty Thermometer for Bathtub Bath Pool, with Temperature Warning, 2 Extra Duck Toys

  • ...ecision sensor, the baby forehead thermometer has a fast reading speed, and it only takes 1 second to read the temperature. The temperature measurement accuracy is within 0.1°C. Units of measurement can be switched between °F and °C according to preference..
  • 【User Friendly Design】 This non-contact thermometer automatically switches between forehead and ear mode. At the same time, it can switch between mute and unmute mode. It also has the capacity to store 40 sets of memories. In addition, it has a variety of useful functions: switching between ºC and ºF, automatic shutdown after 13 seconds of non-use to save energy..
  • 【Fever Alarm】This is a functionality with this Thermometer. If the temperature is within 99.3℉ (37.4 C)-100.3℉ (37.94C).
  • the orange light will turn on flashing and remain for 3 seconds with 3 short beeps, which is a warning indicative of a fever..
  • 【Professional Certification】 Our infrared thermometer complies with CE and ROHS certification standards. We provide 12 months warranty to you from the date of purchase, if you have any questions, please feel free to contact us, we remain at your disposal for any need..
Check Stock

[New Generation] Automatic Vacuum Switch for Power Tools, Etoolcity Unique Current Sensing Technology to Delay Vacuum On to Prevent Circuit Overload, Eliminating Circuit Breaker Tripping

  • Adjustable vacuum startup time and shutdown time in vacuum auto mode.
  • Controller, tool and vacuum run Led indicator. All Our controller designs make your work more intelligent, convenient and safe.
  • Unique Current Sensing Technology. In vacuum auto mode, the vacuum will automatically delay turn on after the tools on, which helps prevent circuit overloaded by large current if tool and vacuum power-on at the same time.
  • Vacuum will automatically delay turn off after the tools off, which reducing airborne toxin and work area noise that can lead many health problems.
  • Suitable for most medium duty workloads. Etoolcity automatic vacuum switch has a starting threshold of approximately 0.25 amps(30watts at 120V and 60watts at 220V), perfectly suited for medium-sized work loads such as most Miter Saws, Table Saws, Power Sanders and Routers, and extend the life of your vacuum.
  • Adopting high-cost, UL-certified American Standard 14AWG power cord which allowable passage with a large current that more than 30A, the Etoolcity Automatic Vacuum Switch can work stably within 3600W. The switch's shell has PC+ABS V0 grade flame retardant material, it is more reliable and safe to protect work.
Check Stock

Pet ID Scanner, USB Charging 134.2Khz/125Khz Pet Chip Reader, Portable ABS Plastic Handheld for Pet Cat Dog Pig

  • Support storage function, can store up to 128 pieces of label information, users can upload it to the computer through the USB data cable..
  • With low battery alarm, ultra‑low battery automatic shutdown, overtime no operation automatic shutdown function. Built‑in lithium battery, support USB charging..
  • With high‑brightness display, can display clearly under strong light conditions indoor or outdoor..
  • Adopt for RFID wireless reading method, support for EMID/FDX‑B (ISO1784/85) and other formats of electronic tag..
  • Stable performance, simple operation, compact and easy to carry, suitable for small animal management and traceability..
Check Stock

WisTek DSO Shell Oscilloscope Full Assembled with BNC-Clip Cable Probe, 1MSa/s, 0-200KHz, 5mV/div Sensitivity and 2.4-inch Color TFT Display

  • DC Power and Probe are Not included. With Automatic mode, conventional mode and single trigger mode. Included 10:1 BNC probe and use 9V DC power charger (NOT Included), Convenient to capture the instantaneous waveform. With secondary development on the basis, can be changed to voltmeter, data loggers. 2.4-inch color TFT display.
  • Waveform parameter digital display include: Frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values and effective value.
  • Adopts ARM Cortex-M3 processor (STM32F103C8).
  • Rising or falling edge trigger are available, also the trigger level position and vertical displacement are adjustable. Short-circuit and open-circuit detection to find out the soldering error.
  • Observable the previous waveform before trigger (negative delay). Freeze waveform display at any time (HOLD function). Come with instructions, easy to install and operate.
  • Waveform storage function: Waveform will not lose when save/tune out the waveform/shutdown waveform. Test signal source with 1KHz /3.3V square wave. Pls contact us if have any quality issue and need support, will reply within 24hours, refund or replace with a new one.
Check Stock