Best Automotive Shim Pack

Spicer Rear Axle Bearing and Seal Kit For 1997-06 Jeep TJ/w Dana 44 Both Sides

  • replacement carrier shim kit for dana spicer 44 differential, 30 spline axles.
  • Precision Machined for Specific Applications.
Check Stock

Hassay Savage 10212 3/16\ Style II Keyway Push Broach

  • Keyway broach pushes through the material to create a keyway-shaped hole.
  • Made of M-2 high-speed steel for a balance of strength and toughness.
  • Precise tooth rake and relief angles provide efficient broaching of mild steel.
  • Designed for use with manufacturer's associated bushing or shim style II.
  • Comes with one shim to adjust depth of cut.
Check Stock

Hassay Savage 10320 5/16\ Style III Keyway Push Broach

  • Keyway broach pushes through the material to create a keyway-shaped hole.
  • Made of M-2 high-speed steel for a balance of strength and toughness.
  • Precise tooth rake and relief angles provide efficient broaching of mild steel.
  • Designed for use with manufacturer's associated bushing or shim style III.
  • Comes with one shim to adjust depth of cut.
Check Stock

[2 Pack] Mission Automotive Transfer Case Cable Bushing fits Jeep Wrangler JK 2007-2018 and More - Repair Your Jeep Transfer Case Linkage - Replacement 68064273ab Bushing - Easy Installation Bushings

  • Don't Get Stranded -- If you take your vehicle off-roading, its transfer case cable bushing can weaken over time and break. This will leave you stuck....
  • Exact Fit For -- The Mission Automotive transfer case shifter linkage bushing fits various Jeep Models. Compatibility includes Jeep Wrangler JK....
  • Easy Installation -- The Mission Automotive bushing compatible with the Jeep Wrangler transfer case bushing goes on without much effort. First, remove....
  • Don't Break The Bank -- Buying automotive parts can add up quickly. Get the best value by ordering the Mission Automotive part compatible with select....
  • 2 Pack -- Driving your vehicle causes wear and tear on the transfer case cable bushing. They easily shatter over time. With this pack of 2 Mission....
Check Stock

Barrel Shim Kit 1/2x28 Muzzle Brake Alignment 16 Pieces

  • 7. 48mm Complete shim kit. 1. 20mm-3. 50mm in 0. 05mm increments with 3 shims in each size, Perfect for all your valve maintenance needs.
  • For Models: 2007 - 2018 Honda CRF 150R Bike, 2007 - 2018 Honda CRF 150RB Bike, 2013 - 2018 Honda CRF 250L Bike, 2004 - 2017 Honda CRF 250R Bike, 2004....
  • Laser etched size on top of shim for quick easy identification.
Check Stock

3 Pcs Guitar Neck Shims Made of Solid Maple Protective Guitar Neck Gasket for Bolt-on Neck 0.25° 0.5° and 1°Degree Guitar Plate for Guitar and Bass Repair

  • 【 FUNCTION 】 Guitar neck shims are used to change the angle of a bolt-on guitar neck for protection purposes. The shims are carefully angled and molded from tapered maple to provide the exact angle of tilt needed without creating an air pocket, thus protecting the guitar's neck and base from wear and damage..
  • 【 PERFECTLY RESTORE YOUR GUITAR OR BASS 】 Our guitar neck shims are ideal for repairing electric guitars and basses. They are made with a highly versatile design and can be easily customized to fit your specific needs by cutting or sanding, to protect your guitar from corrosion and improper angle damage..
  • 【 MADE OF SOLID MAPLE 】 The choice of solid maple for guitar neck shims is preferred over plastic for its better resonance, stability, and ability to produce a more beautiful sound..
  • 【 HARD MAPLE SHIM SET WITH THREE TAPERS 】 A set of three hard maple shims with tapers of 0.25, 0.5, and 1 degree, each with a rectangular shape featuring rounded edges and measuring 55 mm by 75 mm. The approximate taper specifications are 0.76 mm to 0.48 mm for the 0.25-degree shim, 0.71 mm to 0.20 mm for the 0.5-degree shim, and 1.52 mm to 0.25 mm for the 1-degree shim..
  • 【 EASY TO USE 】 To ensure a quick turnaround for a common guitar repai....
Check Stock

VKTECH 2pcs Acrylic Replacement Cutting Mat Plate for DIY Embossing Cutting Dies Machine Platform (3mm B +5mm A)

  • Compatible with Gemini Jr. Die Cutting And Embossing Machine, CraftFIRST A5 Die Cutting Machine, Logia A5 Die Cutting And Embossing Machine..
  • Strong, thin stainless steel, increases the cutting capability of thin dies.
  • Make die cutting of intricate dies much easier..
  • Measures 6 X 8. 9 Inches, Pack contain one shim.
Check Stock

Twippo 708Pcs Waterproof Automotive Electrical Connector Terminals Automotive Electrical Wire Connector Plug Kit 1/2/3/4/5/6 Pin Connectors Waterproof

  • 【Package Content】(708Pcs/43Sets) 1/2/3/4/5/6 Pin automotive super sealed waterproof electrical wire connector sets with male & female terminal and silicone rubber cable seal. 1-6 pin waterproof connector: a total of 43 sets of automotive connectors waterproof are included, which can meet most of your needs..
  • 【High Quality of Automotive Connector】Automotive waterproof connectors are made of high quality environmental-friendly materials, with high chemical stability, electrical conductivity and oxidation resistance, waterproof, dustproof and safe. Buckle design of automotive wire connectors ensures accurate and complete insertion of the contact in the housing and prevents it from slipping out of the electrical plug connectors. Can also be easily removed when needed..
  • 【Excellent Performance of Weather Pack Connectors Kit】The automotive connector kit terminals use high-precision copper plating process to improve conductivity, easy to install under soldering and crimping, reliable safe connection, no loose, and lightweight. They are perfect automotive replacement ignition plug connectors..
  • 【Widely Applications of Automotive Electrical Connectors】Automotive waterproof connectors are great for various wire connectors of motorcycle, truck, marin....
Check Stock

Jam Nut 1/2x28,5/8x24 Steel Black 5 Pack 5/8x24

  • 9. 48mm Complete shim kit 1. 20-3. 50mm in . 05mm increments with 3 shims in each size, Perfect for all your valve maintenance needs.
  • For Models: 2004 - 2008 Arctic Cat DVX 400 ATV, 2006 - 2014 Honda TRX 450ER ATV, 2004 - 2009 Honda TRX 450R ATV, 2003 - 2006 Kawasaki KFX 400 ATV,....
  • Laser etched size on top of shim for quick easy identification.
Check Stock

Spring Steel 1095 Shim Sheet Assortment Blue Tempered Polished Finish Spring Steel Shim Stock 0.004 0.008 0.015 0.02 0.024 0.03 Thick 6 Width 6 Length 6 Pieces

  • ✿---- If you are a professional tool or die maker, or a machine maintenance engineer, you may often need these precision gaskets, you can prepare some for emergency use..
  • ✿---- Our spring steel shim sheet assortment including 6 popular thickness(0.004", 0.008", 0.015", 0.02", 0.024", 0.03" )to meet your various need, great value and practical..
  • ✿---- Spring steel shim sheet is made of high carbon blue tempered spring steel which has a excellent processing performance, can cut or weld according your reqirement..
  • ✿---- Spring steel shim widely used in applications which high toughness and accurance are required. Such as machine installation and maintenance, mold setting, etc.
  • ✿---- As we are so strict with our quality, we have confidence. So we would refund 2 times price if you receive defective product..
Check Stock