OBD2 Male to Cigarette Lighter Memory Saver Adapter Cable Car OBDII Emergency Power Supply Cable
This cable has reverse-connection protection . It is used to charge your car electric system via this cable to preserve the vechile codes and save all information in memory when you need to change the battery .But you can not get power reversely from the car electric system via this cable ..
OBD2 16pin to cigar lighter male ,and compatible with all obd ii memory saver.
Thick cable 18awg gauge , and length 10ft/3m.
Reverse connection protection and 8 amp fuse in-built. This obd2 male connector can work with both 12v and 24v obd2 female port ..
Connect the obd2 male connetor to the car you want to replace the battery for . The cigaretter lighter connector will be connect to a battery power charger or a good car which is starting ..
NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, lighting, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations.
Type NM-B cable (nonmetallic-sheathed cable) may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90°C (with ampacity limited to that for 60°C conductors.
Coated in patented SIMpull Cable Jacket for easier pulling, stripping, and installation.
This wire is color coaded for easy size identeification, White - 14 AWG, Yellow - 12 AWG, Orange - 10 AWG, and Black - 8 AWG and 6 AWG..
Made in America, 6 gauge, 3 conductors with ground, 125' per Reel, UL Listed type NM-B.
The TAB Battery Book: An In-Depth Guide to Construction, Design, and Use
SAE battery connector extension cable is heavy duty 10AWG wire which can reduce power loss, thick and durable. The inner core of the cable is made of high quality copper wire. Length: 60cm/2ft. Rated Voltage: 600V..
The SAE connector is equipped with a dust cap. When the cable is not in use, the dust cap covers the SAE connector to keep the inside of the connector clean and dry. Waterproof and dustproof. Thus extending the service life of the cable..
The other end is 0.32"/8mm Tin plated Ring Terminal. Comes with 15A, 20A, 30A fuses for electrical protection to meet your different needs. Heat and corrosion resistance, which can work normally in a wide voltage range of DC 12-24V..
Specially designed for extending car or motorcycle battery charging terminals, maintaining a trickle charge saves the battery. Not only can it be powered directly from the motorcycle's existing SAE socket, it can also be powered from the battery by connecting to a ring terminal extension cord..
Package include: 1 Pack SAE to ring terminal extension cable, 3PCS 15A/20A/30A fuses, 1PC SAE to SAE polarity reverse adapter..
KOTTO Battery Cable Lug Crimper Tool 6-50mm², Wire Crimping Tool, Pliers for Crimping Wire Cable with Cable Cutter for 10,8,6,4,2 and 1/0 AWG Wire Cable Cutting and Crimper with Storage Bag
Battery Cable Lug crimping tool kit comes with a professional cable crimper and a cable wire cutter, which can satisfy most heavy strippings and crimping work..
Battery Cable Lug Crimper Tool is durable to use. Precise crimping molds and complete locking (self-locking and releasing mechanic unit) ensure high crimping quality when crimping repeatedly..
Battery Cable Lug Crimper is made of hardened steel, Tool for heavy crimping works / Crimper has an anti-slip handle for a safe application..
Easy operation: press to rotate the inside dies, The crimper has individual settings from 6mm²/10mm²16mm²/25mm²/35mm²/50mm²( Similar to AWG 8/6/4/2/1/1/0).
Package includes: 1 x Battery Cable Lug Crimper Tool, 1 x Cable Cutter, 1 x Storage Bag.
Woods 63950032 50 ft. 6/3 Black Stranded CU SIMpull NM-B Wire
VERSATILE CABLE FOR RESIDENTIAL USES: NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, lighting, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations.
DURABLE: Type NM-B cable (nonmetallic-sheathed cable) may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90°C (with ampacity limited to that for 60°C conductors.
EASY INSTALLATION: Coated in patented SIMpull Cable Jacket for easier pulling, stripping, and installation.
QUICK SIZE IDENTIFICATION: This wire is color coaded for easy size identeification, White - 14 AWG, Yellow - 12 AWG, Orange - 10 AWG, and Black - 8 AWG and 6 AWG..
SPECIFICATIONS: Made in America, 6 gauge, 3 conductors with ground, 50' per coil.UL Listed type NM-B..
VonSom 2 Foot 4 AWG Battery Cable Four Gauge Wire with 3/8 Ring Terminals for Car RV Solar ATV Lawn Mower Motorcycle Black + Red 2 Pcs Set
4 AWG Gauge Battery Cable: Included one positive (Red) and one negative (Black) cable, 2 foot length for each cable, fit 3/8'' stud. black + red 2 pcs....
Copper battery cables are available with pre-attached cable lugs with 3/8" diameter mounting holes. Jacket and insulation are resistant to oil, gas,....
Oxyten free copper (OFC) conductors ensure maximum performance, Rated 600 Volts Max with 105C Dry and 75C Wet temperature ratings and will remain....
Polyolefin heat shrink tubing is applied at the cable lug attachment point to form a protective seal, good for prevent corrosion and heat insulation..
VonSom power inverter cables are excellent for battery bank wiring, inverter cables, grounding cables, RV car marine boat wiring applications, golf....
With this powerful crimper, you can easily crimp wires and docking connectors. It is much easier than using a pair of manual crimpers. It provides a more convenient and safe crimping operation..
It is equipped with a safety valve. When the pressure reaches its maximum, the pressure is automatically released to prevent overpressure..
The product is equipped with a durable yellow plastic case for easy carrying and compact storage..
RICH SOLAR 200 Watts 12 Volt Polycrystalline Solar Kit
Includes: 2 x 100W Polycrystalline Solar Panel + 30A PWM Charge Controller + 2 x 20' 10AWG Wire from Solar Panel to Controller + 2 x 10' 10AWG Cable from Controller to Battery + 2 x Mounting Hardware Z Brackets + Parallel Connectors.
This kit offers enough power to charge most single or dual 12 volt battery banks. Power your RV, boat or trailer with 200 watt, or expand it up to 400 watt for larger rigs and equipment..
With the highest grade Polycrystalline solar cells for optimal output, our 2 x 100 watt panel is treated with anti-reflective coating to maximize light absorption..
Installation is a breeze with our pre-assembled wiring harness that doesn’t require crimping tools. Since all of our products are compatible with each other, makes expansions, upgrades or additions simple and easy… just plug in and go!.
25-Year Output Warranty, buy with confidence knowing that your solar investment will last for the long-haul..
✅【Compatible with INNOVA Scanner Models:】3110, 3120, 3130, 3140, 3150, 3160, and also fits 31003, 31003, 31403, 31603, 31703, 5100, 5160 model. OBDII Cable looks similar, please confirm the model applicable to you when purchasing to avoid delaying your time.