Best Axial Contact Bearing

2 Sets AXK2035 Thrust Needle Roller Bearings with Washers 20mm Bore 35mm OD 2mm Width

  • Bearing Model: AXK2035 (I.D.=20mm, O.D.=35mm, Thickness=2mm).
  • Material: Chromium steel rollers for heat tolerance and durability under heavy loads.
  • Steel cage guides and evenly spaced rollers for reduced friction, vibration and noise.
  • Features: Needle Roller Thrust Bearings can accommodate axial loads in one direction only.Combined with 2 washers for applications where adjacent machine components cannot serve as raceways..
  • Capability:45.6kN Static Load Capacity, 12.9kN Dynamic Load Capacity, 8500RPM Maximum Rotational Speed.
  • Package contents:2 x bearing,4 x bearing washers..
Check Stock

Two (2) UCP205-16 Cast Iron Pillow Block Mounted Bearings - 1\ Inch Inside Diameter w/Set Screw Lock - P205

  • This UCP bearing has a self aligning feature. If you receive the bearing and the the internal sleeve appears to be crooked this is not a problem because it is meant to have some play so that it will self align with the shaft..
  • UC205-16 chrome steel bearing for efficient operations at a wide range of speeds.
  • Dynamic (radial) load rating of 14 kN and static (axial) load rating of 7.85 kN.
  • 1" inside diameter fits conventional cylindrical shafts.
Check Stock

One (1) UCP205-16 Cast Iron Pillow Block Mounted Bearing - 1\ Inch Inside Diameter w/Set Screw Lock - P205

  • This UCP bearing has a self aligning feature. If you receive the bearing and the the internal sleeve appears to be crooked this is not a problem because it is meant to have some play so that it will self align with the shaft..
  • UC205-16 chrome steel bearing for efficient operations at a wide range of speeds.
  • Dynamic (radial) load rating of 14 kN and static (axial) load rating of 7.85 kN.
  • 1" inside diameter fits conventional cylindrical shafts.
Check Stock

Sackorange 10 PCS R8-2RS(1/2\x1-1/8\x5/16\) C3 Premium Sealed Radial Ball Bearing - Deep Groove Bearing - High Speeds - Suitable for Electric Motor Applications.

  • Inside Diameter: 0.5 inch Outside Diamater: 1.125 inch Width: 0.3125 inch.
  • Deep groove geometry for high speeds and supporting both radial and axial loads.
  • Rubber seals on both sides of the bearing to keep lubricant in and contaminants out.
  • Suitable for use in electric motor applications.
Check Stock

uxcell 51101 Thrust Ball Bearings 12mm x 26mm x 9mm Carbon Steel Single Direction 3pcs

  • [SIZE] - Bore Diameter=12mm, Outer Diameter=26mm, Thickness=9mm.
  • [MATERIAL] - Chrome Steel(AISI 52100) bearing balls have great wear-resistant, high temperature resistance and high hardness.
  • [CAPABILITY] - Dynamic Load Rating (Cr): 10.3kN.
  • Limiting Speed (Grease): 6500rpm, designed for low speed operation and axial loads only.
  • [APPLICATION] - Can be used for oven turntable, jack, pump, rotating applications, machine tools, automobiles, ect..
  • [FEATURES] - The separable components of thrust ball bearings are interchangeable. Low noise and long service life, easy to maintain. Keep the bearing working environment clean and bearing lubricated in time.
Check Stock

Donepart 627ZZ Bearing 7mm x 22mmx 7mm Ball Bearings Double Shielded and Lubricated for Fidget Spinner, Skateboard, Mini Motor, 3D Printer, etc. (10 Pack)

  • 627-ZZ Ball Bearing Size: 7mmx22mmx7mm ( ID:7 MM, OD: 22MM, Width: 7 MM) Metric Series.
  • Pre-Lubricated: 627-2zz roller bearings with double metal sealed ring, inside pre-Lubricated, provide stable performance..
  • Premium Material: Made of chorme steel, reduced friction, vibration, and noise. better than carbon steel, ensure a long usage life..
  • Deep groove ball bearing for high speeds and supporting both radial and axial loads..
  • Wide application: 608 bearing is a 7 mm ball bearing can be used in many rotary and factory automation applications. like skateboard, motors wheel, instruments, gearboxes, household appliances etc.
Check Stock

uxcell 20pcs MR52ZZ 2mmx5mmx2.5mm Double Shielded Miniature Deep Groove Ball Bearing

  • MR52ZZ Miniature Single Row Deep Groove Ball Bearing..
  • Bearing made from Chrome Steel(Gcr15) for durability and resistance..
  • Two steel dust shields to prevent ingress of dirt and foreign matter, high temperature resistance..
  • Features: simple configuration,high speed,less coefficient of friction,less vibration and noise..
  • Mainly take the radial load as well as moderate axial load..
Check Stock

Donepart 6203RS Bearings 6203 2RS ABEC3 High Speed Ball Bearings 17mm x40mm x12mm for Electric Motor, Garden Machinery, Wheels, etc (2 Pcs)

  • Deep-groove geometry for high speeds and supporting both radial and axial loads.
  • Shields on both sides of the bearing to keep lubricant in and contaminants out.
  • Normal radial internal clearance for applications that do not involve thermal expansion or atypical precision.
  • Pressed steel cage evenly spaces the balls for even load distribution and prevents contact to reduce friction, vibrations, and noise.
Check Stock

Othmro TC815 Thrust Needle Roller Bearings with Washers Bearing Steel 1/2\x15/16\x5/64\ 2pcs

  • Supply identification name: TC815, supply MOQ: 10, size: 1/2"x15/16"x5/64".
  • Material: bearing steel, precision: P0, rolling element material: bearing steel.
  • [MATERIAL] - rollers for heat tolerance and durability under heavy loads.
  • cage guides and evenly spaced rollers for reduced friction, vibration, and noise.
  • [FEATURES] - Needle Roller Thrust Bearings can accommodate axial loads in one direction only.
  • [WASHER] - Combined with 2 washers for applications where adjacent machine components cannot serve as raceways.
Check Stock

Mssoomm 20mm CNC Ballscrew Kit SFU2010 RM2010 Anti-Backlash Ball Screw, L 59.06 inch / 1500mm + Nut + BK/BF15 Bearing End Supports + Coupler + Nut Housing+ Motor Bracket for Nema 23 Stepper Motor

  • Nut + BK15 integrate with Motor Bracket for stepper motor Nema 23/BF15 End support with locknuts and circlips + Flexible coupler + Ball Screw Nut Housing, (The coupler bore for the motor shaft is 8mm in default),Precision C7 Grade.
  • The product can ensure motor shaft, coupling axial, axial bearing hole, and screw axis all in a line strictly, to make the transmission system run more accurately and sturdily, less noise and longer life.
  • The ballscrew is no stick-slip effect, heats up less, reduce driving power required, small starting torque, able to apply high speed and micro-feeding.
  • The material of the bk bearing support and Motor Bracket is cast steel, high hardness, shock resistance and high precision machining.
  • We can provide complete information of the products, the drawing is showed in the image 6.（If you need CAD and 3D modeling files, you could give us Amazon Message）, we have full ranges of ballscrew products, any special needs, please let us know.
Check Stock