Best Balance Lubricated Plug Valve

Delta Faucet Ara 14 Series Single-Function Shower Trim Kit, Matte Black T14267-BLLHD (Valve and Shower Head Not Included)

  • Monitor pressure balance valve keeps water temperature within a safe plus or minus 3Degrees F plus or minus 1.6 Degrees C, helping to protect you from sudden changes in hot or cold water pressure.
  • Trim kit only, must order MultiChoice universal valve separately to complete the unit.
  • 2.00 gpm at 80 psi, 7.6 L/min at 550 kPa.
  • Valve Type: Single-function pressure balance cartridge.
  • Shower head not included, must purchase separately.ADA compliant.
Check Stock

WRISIN Shower Faucets Sets Complete Brushed Nickel (Valve Included), Shower Systems with Rain Shower and Handheld

  • 【Rain Shower Head with Handheld Spray】WRISIN brushed nickel shower faucet set with rain shower and handheld, and the high-pressure shower head gives you an efficient shower experience.(Flow rate: 1.8 GPM, 6.8 L/min at 60 PSI).
  • 【Warm and Nice shower】The shower system comes with a pressure balance valve, which is able to ensure that there's an even water flow and the right temperature. You can calmly continue singing in the shower ― without the risk of being burned or getting a cold shock..
  • 【High-quality Shower Valve】The valve body is constructed of brass ensuring dependability and longevity..
  • 【Universal Inlets / Outlets 】 The shower head and faucet set with NPT 1/2" connecting thread, which is compatible with most standard U.S. plumbing connections, are designed to easily install, more suitable for American bathrooms..
  • 【Shower Faucets Sets Complete】9 inch rain shower head, 6 functions hand-held shower head, shower arm, shower hose, shower holder and brass pressure balance valve..
Check Stock

GROHE 35115000 GrohSafe 3.0 Pressure Balance Valve Rough with Flush Plug with Elbows with PEX Crimp Outlets with Service Stops, Unfinished

  • PEX elbow connections for easy installation without adaptors, reducing leak points.
  • Valve can be easily rotated 180° to accommodate supply lines from floor or ceiling.
  • Flush plug allows valve body to be tested and flushed without the presence of the valve cartridge (ships with trim).
  • Can be tested using flush plug with air (200 psi) or water (300 psi).
  • Stainless steel retaining ring with flats secures flush plug and cartridge, eliminating the need for screws.
Check Stock

Esnbia Shower Kit, Shower Faucet Set(Valve Included) with 6-Inch Rain Shower Head and 4-Inch Linear Shower Drain, Matte Black

  • IMPORTANT WARNING:Not compatible with other brand valve and cartridges.The old shower valve must be removed if install this kit..
  • 6-INCH HIGH PRESSURE RAIN SHOWER HEAD: Enjoy a waterfall like shower experience, with modern excellence in performance. offer consistent powerful shower even under low water pressure, that this will bring you an high water pressure..
  • CUPC CERTIFICATION PRESSURE BALANCE VALVE : Pressure balance valve cartridge, brass valve body, the flow of cold and hot water can be adjusted through the settings on the left and right sides. Designed for use with standard 1/2" U.S. plumbing connections. Products are in compliance with the following standard(s): ASME A112.18.1-2018/CSA B125.1-18 ASSE 1016/ASME A112.1016/CSA B125.16..
  • The square shower drain cover adopts a grid design, greatly enhances the water flow..
  • This shower drain made of 304 stainless steel, Matte black finish works with any decorating style. Brushed gold finish works with any decorating style. Our square shower drain outlet easy to unload and installation, saving you money and time. It can also be used in kitchen, balconies, garage, basement etc..
Check Stock

Gabrylly Brushed Gold Shower System, Wall Mounted Slide Bar Shower Faucet Set with High Pressure 10\ Rain Shower head and 5-Setting Handheld Shower Set, Shower Valve with Trim and Diverter

  • HIGH WATER PRESSURE: 3 functions handheld shower head and 8 inches rain shower head offer consistent powerful shower even under low water pressure..
  • PRESSURE BALANCE VALVE:The pressure balance valve core can make the hot and cold water pressure in a stable state, so as to achieve the anti-scalding effect. The mixing valve can adjust the water intake of the hot and cold water, effectively solve the problem of insufficient water pressure. Our shower valve is compliant with US CUPC certification.California CEC list, In line with ASME A112.18.1-2018/CSA B125.1-18.
  • HAND SHOWER HEIGHT ADJUSTABLE:You can adjust the height and angle of the handheld shower according to your height to get the best shower experience.(Adjustable range: 23-INCH),This plays an important role for children shower.Slide bar is not a grab bar. Not to be used as support..
  • EASY TO INSTALL:Designed to easily install with standard U.S. plumbing connections..
  • PACKAGE INCLUDE:valve trim(include rough in valve),rain shower head,handheld shower head, shower arm, and elbow,shower holder,slide bar.
Check Stock

Mustang Carbon Fiber Trunk Spoiler, GT350 Track Pack Spoiler Carbon Fiber, 2015 Mustang GT Spoiler for 2015-2021 Rear Trunk Wing Racing Spoiler, fit V6, EcoBoost, GT and GT350 2015-21

  • 【Compatible Models】Precision Machined Aluminum Billet Plug for 2013-2020 Ford F150 2.7 or 3.5 E, Note: This does not apply to 2012 F150, they use a different configuration with 2 mechanical exhaust valves.
  • 【Use】Using this vent valve plug, you can vent hot pressurized to atmosphere, reducing inlet temperature and improving overall performance over the entire operating range. You get clean exhaust valve sound and better performance without recirculating hot air and introducing unnecessary heat into the engine..
  • 【Easy Installation】There is a large hose connecting the intake system to the exhaust valve with quick connect, snap-on/snap-on coupling. To install this plug, simply release the quick connect fitting from the bleed valve (located on the bottom drive side corner of the intercooler, behind the front bumper), snap into this precision machined plug, and zip the hose to the blower The gas top closes the valve outlet so it doesn't toss. That's it, the VTA mode is complete!.
  • 【DESIGN】This VTA mod allows you to vent hot boost into the atmosphere instead of recycling it and producing a hotter inlet temperature. T....
Check Stock

Inflatable Air Valve Replacement Screw Air Valve for Inflatable Rubber Dinghy Raft Pool Boat Fishing Boats 2pcs

  • High Quality: This Inflatable Air Valve is made of quality high dense ABS plastic, sturdy, anti and durable..
  • Size: Diameter of Thread Part: Approx. 20 mm / 0.78 inch. Length of Thread Part: Approx. 16 mm / 0.62 inch..
  • Cap Design: The fine design with a valve cap ensures antileak inflation. The bottom of the air plug has a rubber mat which can prevent leaks more effectively, give you safer protection..
  • Quickly Inflation & Deflation: The valve is a oneway inflation valve, good for quick inflation. Easy to fit, good performance and long serve life..
  • Wide Application: This Inflatable Air Valve fits most inflatable boat, raft, rubber dinghy, etc. Package Included: 2 * Air Valves. Comes in pair, good replacement accessory for your inflatable boat..
  • Quickly Inflation & Deflation: The valve is a oneway inflation valve, good for quick inflation. Easy to fit, good perf....
Check Stock

lukar 3/8" High Pressure Washer Ball Valve Kit with Teflon Tapes for Power Washer Hose, 4500 PSI

  • ①【Superior 3/8 Ball Valve】: lukar 3/8" ball valve pressure washer is made of high quality stainless steel + copper, durable, leakproof, rustproof, high temperature and pressure resistant.
  • ②【High Pressure Ball Valve Specification】 : 3/8" high pressure ball valve kit. 3/8" quick connect plug, 3/8" male NPT thread.
  • 3/8" quick connect socket, 3/8" male NPT thread. Max working pressure: 4500 PSI, Max working temperature: 158 °F.
  • ③【Easy to Use】: The 3/8 high pressure washe ball valve kit is easy to turn on and turn off, and provides good leverage under high pressure. Easy to connect to surface cleaner ,pressure washer gun, nozzle, pump and high pressure hose.
  • ④【Leak Proof】: lukar high pressure ball valve kit comes with 2 x teflon tapes. Teflon tape is used to wrap around the thread to effectively prevent water leakage.
  • ⑤【Package Includes】: 1 x high pressure washer ball valve.
  • 2 x Teflon Tapes, 2 x thread protection covers(Shown in the first image in listing).
Check Stock

Gabrylly Matte Black Shower System , Wall Mounted Slide Bar Shower Faucet Set Complete for Bathroom with High Pressure 8\ Rain Shower head and 3-Setting Handheld Shower Set, Shower Valve Include

  • HIGH WATER PRESSURE: 3 functions handheld shower head and 8 inches rain shower head offer consistent powerful shower even under low water pressure..
  • PRESSURE BALANCE VALVE: The pressure balance valve core can make the hot and cold water pressure in a stable state, so as to achieve the anti-scalding effect. The mixing valve can adjust the water intake of the hot and cold water, effectively solve the problem of insufficient water pressure. Our shower valve is compliant with US CUPC certification. Products are in compliance with the following standard(s): ASME A112.18.1-2018/CSA B125.1-18.
  • HAND SHOWER HEIGHT ADJUSTABLE:You can adjust the height and angle of the handheld shower according to your height to get the best shower experience.(Adjustable range: 23-INCH),This plays an important role for children shower.Slide bar is not a grab bar. Not to be used as support..
  • EASY TO INSTALL:Designed to easily install with standard U.S. plumbing connections..
  • PACKAGE INCLUDE:valve trim(include rough in valve),rain shower head,handheld shower head, shower arm, and elbow,shower holder,slide bar.
Check Stock

SunCleanse Shower System, Bathroom Rainfall Shower Faucet Set Complete with 7-Setting Handheld Shower Head Combo, Included Rough in Valve and Trim Kit, Brushed Nickel

  • High Pressure Shower: 4.8 Inch oversize hand shower face and high pressure 9 inches large shower head provide full body spray shower even under low water pressure area..
  • Included: 7-Setting handheld shower head, rainfall shower head, 16 inch shower arm, brass shower holder and pressure balance shower valve with trim kit..
  • Pressure balance shower valve: Brass shower faucet rough-in valve body and trim, strong compression resistance, no leaking. cUPC certified valve cartridge can protect us from scalding injury caused by sudden changes in hot and cold water pressure..
  • Brushed nickel finished offers a sleek look, ensuring corrosion resistance and durable, easy to clean..
  • 5 Years warranty. Any product quality problem can be guaranteed free of charge. The shower cartridge is permanently replaced free of charge..
Check Stock