EcoNet Controls EVC200-HCSML The Bulldog Valve Robot, Z-Wave Water Valve, Smart Home Friendly, Easy to Install and No Plumbing Required, for Valves up to 1.5"
Easy Installation, No Special Tools or Plumbing Required. Fits Over Existing Levered Ball Valve..
Size: 1/2″, 3/4″,1″, 1.25″ & 1.5″ Valves.
A Smart Home Controller Is Required. Highly Compatible with Popular Smart Home Controllers including SmartThings, Wink, Nexia, Control4, Universal Devices and Honeywell. Kit Preconfigured & Tested. Controller not Included..
High Torque and Intelligent Stroke Control Make EcoNet’s Bulldog Valve Robot Ideal for the Toughest Valves and Installations..
6 Pieces Air Conditioning Refrigerant Angled Compact Ball Valve 1/4 Inch for R410A R134A R12 R22 AC HVAC and R12 R22 to R134A Adapters 6015 R134A Refrigerant Tank Adapter 6014 Vacuum Pump Adapter
Package includes: you will receive 3 pieces R12 R22 to R134A vacuum pump adapters refrigerant tank adapters, and 3 pieces air conditioning refrigerant angled compact ball valves, easy to match and convenient for your replacement.
Angled ball valves: in the package are 45 degree angle manual shut-off valves with 1/4 inch SAE male and female fitting.
For quick finger-tightening, the couplers nuts are deeply knurled designed for fast operation, the burst pressure ranges from the maximum 800 psi (55 bar) to the minimum 4000 psi (276 bar).
Vacuum pump adapters: these adapters are necessary for vacuum pumps, can adapt R12, R22 systems and R134a systems, are nice adapters for charging and service tools.
Easy to install: you can just tighten the adapter and get a good seal easily with hand, the adapters feature quick and easy connection and disconnection with high flow.
The ball valve can applied to hoses for charging and recovery, suitable for refrigerants R134a, R410A, R22 and R12 charging hoses or manifold, useful tools for HVAC, AC, car air condition maintenance.
Confident to use: made of copper, all angled ball valves and adapters in the package are durable for long-term service, provide simple and easy operation and installation, strong sealing for du....
R134A R410A R12 R22 Refrigeration Charging Hose Set with Ball Valve 3 Color Coded Hoses/w Ball Valve 1/4 SAE Thread Connector for Air Condition Refrigeration Charging Tools AC HVAC Maintenance Kit
WIDE APPLICATION --- Standard refrigeration charging hoses with 1/4" SAE male and female thread for refrigerants R134A, R22, R12, R502, R404..
HIGH WROKING PRESSURE --- 7" length ball valve hvac charging hose completed with solid brass manual shut-off ball valve. Rated working pressure: 3000....
PREFECT DESIGN --- HVAC hoses with ball valves designed to meet standard 1/4 inch SAE female refrigerant charging hoses set with shut off of red, blue....
EASY INSTALLATION --- R22 charging hose and ball valve set design with 45 degree angle on the service port site for easier access. Can be operated....
PREMIUM QUALITY --- Refrigerant hose made of high-quality brass alloy and rubber, last long. Strong sealing for durability and safety. Necessary tools....
1/2\ Float Ball Valve Automatic Fill Feed Humidifier Tank Pond Shut Off with Adjustable Arm for Ponds, Livestock Water Trough
The mini float valve is durable with adjustable arms, made of hard ABS, will not corrode or rust.Non-toxic, tasteless, and can be used for drinking water. 1/2in BSP valve..
No power or pump required: the water float ball valve is suitable for low pressure gravity feeding systems, leak-free operation is achieved by hand tightening..
Auto Fill Valve is perfect for both permanent and temporary installations..
Tub Drain Remover Wrench - Use to Install and Remove Most Bath and Shower Drains and Closet Spuds Square Plastic Toilet Seat Nuts
[WHAT YOU GET] – You will get 2Pcs hexagon key adapters for air conditioning ratchet wrench, provides access to 3/16-Inch and 5/16-Inch hard to reach valves..
[FEATURES] – Spring loaded ball bearing on hex adapter locks securely into HVAC service wrench..
[WIDE APPLICATION] – The A.I.FORCE Hex Key Adapters are designed to open and close the compressor service valve, rotalock valves and shutoff valves on air condition, refrigeration and other equipment, although there is very limited space..
[COMPATIBILITY] – The HVAC Service Hex Key Adapters fit for 1/4-Inch square wrench opening on Ratcheting Wrench, and compatible with 3/16" and 5/16" hex valves..
[PREMIUM QUALITY] - The A.I.FORCE Service Hex Key Adapters are constructed to last with high grade steel alloy, heat-treated for maximum strength..
Dome Home Automation Water Shut-Off Valve - for Pipes up to 1 1/2", White (DMWV1)
WORKS WITH SMART HOME DEVICES – On-demand control from anywhere using your smart home hub’s mobile app. Seamlessly integrates with Wink, SmartThings, Home Seer, Nexia, and other hubs.
SHUTS DOWN WATER LEAKS AUTOMATICALLY – Valve controller shuts off water automatically when your smart home system detects leaks.
SMART HOME AUTOMATION WATER ALARM – Receives notification when water leaks are detected and shuts off water, to keep your home safe even when you’re out of town.
DON’T RISK A WATER LEAK WHEN YOU’RE ON VACATION – Use your Z-Wave mobile application to remotely turn your water shut-off valve off when you know you’re going to be out for a week or two..
USE ON ANY QUARTER-TURN BALL VALVE UP TO 1-1/2 – Works with 1/4-turn ball valves, even those found on water heaters and radiant heat systems.
53021077 Lifters replacement For 4.7 Dodge/Chrysler Lash Adjusters HLA Replaces Part # 53021077 5073596AA (16 Packs)
VALVE LAP TOOL HELPS YOU SEAT VALVES ACCURATELY: Use the ABN Drill Valve Grinding Tool Attachment Valve Lapping Set to properly fit and seat valves into your vehicle engine.
Correct surface irregularities and remove sub-surface damage on your new valves with these motorcycle valve lapping tool small engine tools to fit perfectly into the valve guide for a secure fit.
For use with fine grinding paste (not included).
PERFECT VALVE LAPPING CUP SIZES FOR YOUR NEEDS: 4 attachable suction plates are included with this valve seat lapper tool kit to make fitting and seating various valve sizes in your lawnmower, chainsaw, car, or motorcycle.
Includes 20mm (3/4 inch), 30mm (1-3/16 inch), 35mm (1-3/8 inch) and 45mm (1-3/4 inch) synthetic rubber suction cups that are oil and UV resistant.
FITS YOUR TOOLS: Small engine valve lapping kit includes a 5 inch rubber roller attachment that has two 8mm (5/16 inch) steel shanks to fit your drill and the included suction cups.
Electric drill attachment provides increased control and productivity with less user fatigue while you put the finishing touches on your tune-up.
EASY TO USE: Clean all carbon deposits off valve and valve guide.
1/2 Brass 12V DC Electric Solenoid Valve Normally Open Air Water NBR
Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with diesel fuel, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
1/2" Brass direct acting with NBR gasket..
This highly responsive valve will open and close in less than 1 second when actuated.
meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves..
As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it..
1/2 Brass Electric Solenoid Valve 110V AC NBR Seal N.O Air Gas,Fuel
Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with diesel fuel, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
1/2" Brass direct acting with NBR gasket..
This highly responsive valve will open and close in less than 1 second when actuated.
meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves..
As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it..
