SmarterFresh Five Piece Female Faucet Adapter Kit, Brass Aerator Adapter Set to Connect Garden Hose, Water Filter, Standard Hose via Diverter, in RV & Other
5 FEMALE FAUCET ADAPTERS — Female 13/16” -24T, Female 3/4” -GHT, Female 3/4” -27T, Female 13/16” -27T, Male 15/16”-27T or Female 55/64”-27T X GHTM 3/4” or Male 55/64”-27T. Connects Female Garden Hose to Male or Female faucet. Also connects Male or Female aerator to Male or Female faucet..
NO PLASTIC or RUBBER AT ALL — Includes Many Sizes so You Can Find the Right One, Will Fit When None of Other Brands Do, Useful and Easily Compatible and Includes Custom Fit Washers. Threads on Adapters Won’t Wear Off, Leak, Pop Off, Strip or Rust..
WILL FIT WITH MANY FAUCET ATTACHMENTS including Garden Hoses, Water Filters, Sprayers, Standard Hose via Faucet Diverter, in RV’s, Cache Style Faucets, Standard Faucets and Other Faucet Attachments.
ONE EASY PURCHASE, No Driving Around Unsure What You Need Hoping for Right Fit — Fits What Local Stores Don’t Carry or Bought Individually Would Cost Three Times as Much, Great for Travelers.
FOR SINK FAUCET USE ONLY – Will Not Fit a Faucet Without Removable Aerator, Bathtub Spout, Shower Pipe, or Pump Style Faucet. Will Not Fit Standard Size Shower Hose Without the Use of a Faucet Diverter:(https://www.amazon.com/dp/B01FGB5T0I).
Shower Head for Bathtub Faucet - Sink Faucet Sprayer Attachment with 5 Adapters & ON/Off Extension 4.9 FT Pipe for Hair Washing Pet Dog Rinse Baby Bath
CONNECT FAUCET WATER TO SPRAYER - Consist of 1 water inlet and 2 outlets, you can redirect water from faucet spout to the sprayer through 3-way brass....
LONG WATER PIPE - Equipped with 5 adapters, switchable water outlet and 4.9 ft stainless steel hose, enough length to fit your large....
FIVE FLOW MODES -Jet mode, power rainfall, gentle message, power massage and adjust valve down letting water flow out of Convenient and....
EASY INSTALLATION - 1. Unscrew the tap. 2. Replace diverter parts. 3. Install diverter and water pipe. Just simple steps to get a great cleaner.
ADAPTER SIZE - Package contains the necessary installation accessories. Comes with 5 adapters: Female 20mm (25/32"), Female G1/2 20mm (25/32"), Male....
Whatman 6721-5010 Polydisc TF PTFE In-line Filter 1.0 Micron, 13 psi Maximum Pressure, 900 Flow Rate (Pack of 10)
Materials of Construction: Inlet-Cover, Base, and Collar Cap: Anodized aluminum, Hose Barb Adapters: Polyethylene, Support Screen and Underdrain Disc: Electropolished type 316 stainless steel, O-Ring: Viton, Thrust Ring: PTFE and Effective Filtration Area 9.6 cm2.
Dimensions: Overall Length (Excluding Hose Barbs): 5.7 cm (2.2 in.), Diameter: 5.9 cm (2.3 in.), and Inlet/Outlet Connections: 3⁄8 in. FNPT.
hose barb adapters accept 6.4 mm (1⁄4 in.) ID tubing..
Maximum Operating Temperature: Limited by filter type, hose barb adapters 93 °C (199 °F), or O-ring 204 ºC (399 ºF) and Maximum Operating Pressure 14 bar (1400 kPa, 200 psi)..
Sterilization: Provided non-sterile. Autoclavable if desired at 121 - 123 ºC (250 - 253 ºF) at 1.0 bar (100 kPa, 15 psi) for 15 - 20 min..
Pall 47 mm In-line Lab Filter Holder, Lightweight, Anodized Aluminum Filter Holder Convenient design allows opening and closing without disrupting membrane. Designed for in-line liquid or gas filtration, Durable construction for stack sampling. Type Filter Holder.
Size: The outer diameter of the hose barb is 3/8"(10mm), Suitable for connecting 3/8"(10mm) inner diameter hose..
Material: Hose barb splicer mender made of brass. Pipe clamps all components are all made of 304 stainless steel and will not rust..
Solid Connections:The hose barb can be solid connected to the hose（Fit hose witch inner diameter of 10mm）,The pipe clamps can create a tight seal on flexible or semi-rigid hose..
Characteristic: Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Stainless steel for corrosion resistance and will not rust, super sturdy..
【PACKAGE INCLUDES】 ----- This npt barb kits contains Male Coupler: 3/16" barb to 1/8" MNPT(2) 1/4" barb to 1/8" MNPT (2) 1/4" barb to 1/4" MNPT (2) 5/16" barb to 1/4" MNPT (4) 5/16" barb to 3/8" MNPT (4) 3/8" barb to 1/4" MNPT(4) 3/8" barb to 3/8" MNPT(2) 1/2" barb to 3/8" MNPT(2) 1/2" barb to 1/2" MNPT(2) &304 stainless steel clamp rings 8 pcs.
【CREATE A GOOD SEALING】 ----- NPT barb assortmentUse these hose barb fittings and clamp rings to efficiently connect the flexible tubing or hose. This assorted brass barbed fittings set would allow you to maintain a tight seal..
【WIDE APPLICATIONS】 ----- This brass crimp fitting are essential component to prevent leakage of oil, gas, fluid and fuel. Great for industrial use, automotive, aquarium, marine and much more..
【HIGH QUALITY】Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability，Temperatures range from -40 to 260 F..
Brass Barb Reducer Fittings LIONMAX 1 to 3/4 Barb Hose ID Hose Barb Splicer Mender with 4 Hose Clamps for Air/Water/Fuel 2 PCS
【WITH HOSE CLAMPS】1'' to 3/4'' Hose barb reducer is suitable for connecting 1 inch ID hose to 3/4 inch ID hose. The package contains barb splicer reducer 2 PCS and 304 stainless steel hose clamp 4 PCS (size can adjust). You don't need to buy additional accessories..
【-65~250°F 150PSI】Brass barb reducer fitting has strong temperature resistance and good pressure resistance. So barb hose reducer is often used for water, fuel, oil delivery..
【SOLID BRASS MATERIAL】Barb splicer reducer is made of brass. Strong and durable, not easy to rust and corrode. Hose barb fitting has a long service life. NOTE: Brass barb reducer fitting is not suitable for potable water..
【WIDE APPLICATION】Barb hose reducer is suitable for pipe repair. Various hoses can be connected to this 1 inch to 3/4 inch ID hose barb fitting. Meet your multiple needs..
【TIGHT CONNECTION】This brass barb reducer is smooth overall without burrs. Size meets the standard. The strong barb and hose clamps make the barbed splicer reducer fitting not easy to leak during the connection process..
SharkBite 1 Inch x 3/4 Inch MNPT Reducing Adapter, Pack of 6, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U142LF
SHARKBITE BRASS PUSH MALE REDUCING ADAPTER: This push-to-connect fitting allows you to make a transition between a pipe and an FNPT thread quickly and easily.
ideal for working in tight spaces **Remove using a disconnect clip or disconnect tongs**.
VERSATILE: Pushfit male reducing connectors work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
large diameter fittings (1-1/4 in. to 2 in.) require a Stiffener when connecting to PEX pipe.
EASY TO INSTALL: The innovative push-to-connect design of the SharkBite push male reducing adapters allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
approved for underground and behind-the-wall applications with no access panels.
SPECS: Made with DZR forged brass, this reducing adapter can withstand 200 degrees F and 200 PSI.
