Best Barb To Metric Thread

Class A Customs | T-3000-BPK| 30 Gallon Fresh Water Tank & Plumbing Kit RV Concession

  • ...g process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
Check Stock

45 Pc Tap & Die Set Metric Mm Titanium Tungsten Steel Jumbo Thread Renew Tool

  • 86 Piece Tap and Die Set Bearing Steel Sae and Metric Tools, Titanium Coated with Metal Carrying Case.
  • Size:14.8 x 10.7 x 2.2"inch / 37.6 x 27 x 5.6cm. Weight:12lb / 5.4kg. Material upgrading:Alloy Steel 55¡ã- 60¡ã, Sizes Stamped Engraved-etched On the Metal.
  • SAE TAP SIZES and SAE DIE SIZES: 1/8"-27NPT, 4-40, 6-32, 8-32, 10-32, 10-24, 12-24, 1/4"-20, 1/4"-28, 5/16"-18, 5/16-24, 3/8"-16,3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18.
  • METRIC TAP SIZES and METRIC DIE SIZES: M3-0.5, M4-0.7, M5-0.8, M6-1.0, M7-1.0, M8-1.0, M8-1.25, M9-1.25, M10-1.5, M10-1.25, M11-1.5, M11-1.25, M12-1.75, M12-1.5, M14-2, M14-1.5, M16-2, M16-1.5.
  • Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman Tap and die set is designed to thread cutting: tap is used to process internal thread, while the die is for external thread.
  • Easy Storage: Heavy-duty plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
Check Stock

Whitecap Industries S-3801C Stainless Steel/Nylon Thru-Hull with Barb - 3/4\ Hose Size, Straight

Check Stock

Nut and Bolt Thread Checker Inch & Metric - 26 Male/Female Thread Identifier Gauges - 14 Inch & 12 Metric Sizes

  • Nice Bundle: These thread gauges includes 26 male/female gauges - 14 inch & 12 metric. Each size has a nut and bolt checker on the same gauge. The....
  • Efficiency Improving: No more bent over the container looking for a nut/bolt to finish your project. Identifying the size and thread of nuts and bolts....
  • Handy Tool Which You Should Have One: Excellent item for the mechanic.
  • Applicable to mechanical repairs, or common threads in plumbing, air and gas....
  • Convenient hanging: The wire cable of this thread identifier with loop for hanging it on the wall in your workshop or garage beside your toolbox..
  • Quality Process and Material: These nut & bolt thread checkers are made of strong stainless steel. Inch gauges are clear zinc plated, metric gauges....
Check Stock

Kitchen Sink Side Sprayer with Quick Side Connector Compatible with Moen Faucet Head Replacement, Kitchen Sink Faucet Sprayer Attachment with Water Hose/Holder, Brushed Nickel Finish

  • 3 Adapters Included – Quick Connect Side adapter compatible with Moen + 1/4″ Barb + 3/8″ Barb connector..
  • Ideal Kitchen Faucet Kit – Kitchen faucet spray replacement involves all the parts needed: connector + hose + holder..
  • 1/4” Female Thread – The connector size of hose fitting is standard 1/4” female thread (1/4-18NPSM)..
  • High Quality – The kitchen sprayer heads and holders are made of durable ABS plastic, protect the sprayer from scratch and stain, ensuring long lifetime use..
  • Easy Installation and Use – Comes with hose, washer and side spray holder for convenient installation. One touch trigger action make it easy to use..
Check Stock

Class A Customs | 30 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-3000-BPK-PUMP

  • ...y Water Storage ||WATER TANK MEASUREMENTS: 34 1/2” Longest Length (not including fittings) x 12” x 17 1/2” (rotate tank to change height or width) Average thickness 7/32” +/- (+/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Balloon Style Threaded Female NPT Standard - fitting will be closed, to use remove inner membrane with razor knife (TWO) .5" Threaded Female NPT Standard - open fitting, unsealed.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT hook garden hose directly to tank doing so will cause tank to explode resulting in damage..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
  • classAcustoms 12 VOLT FRESH WATER PUMP | on demand diaphragm pump | MODEL # 12V3 - READ INCLUDED INSTRUCTIONS BEFORE INSTALLATI....
Check Stock

SST Identibolt Bolt and Nut Identifier Gauge

  • "QUICKLY IDENTIFY BOLTS AND NUTS - The SST Identibolt is your One-stop Shop for Verifying the Size and Thread Pitch of All Your Standard Hardware! Never Again Wonder What Size Fastener You Have! Easily Distinguish Between Metric and Inch Thread Sizes, and Quickly Measure Bolt Lengths and Nut Diameters (Unless You'll Miss Making Multiple Trips to the Hardware Store)".
  • ULTIMATE NUT AND BOLT IDENTIFICATION TOOL - The Identibolt Measures Common Imperial SAE and Metric Thread Sizes, Identifying Hardware from #6 to ½" & 4mm to 14mm. Each Size is Accompanied By a Male Thread (for Nuts and Washers), and a Female Thread (for Bolts and Screws)..
  • DURABLE AND BUILT TO LAST - SST's 4"x20" Solid Metal Plate Construction is Hard Anodized for Maximum Thread Strength, With Laser Etched Markings that Will Never Fade or Get Scratched off. Multiple Mounting Holes Give You the Option to Wall Mount it, Secure it in Your Toolbox, or Keep it on Your Workbench!.
  • TWIN RULERS - Inch and Centimeter Rulers on the Bolt Identifier's Edge Help to Quickly Identify the Length of Your Bolt, Screw, Nut, Washer, or Will to Live. Measure Your Hardware Correctly the First Time and Never Make a Second Trip to the Hardware Store Again..
  • UNMATCHED WARRANTY - Masterfully Machined from 6061 A....
Check Stock

WASTOREEL 12mm x 1.25 HSS Metric Right Hand Thread Tap and Die Set M12 x 1.25mm Pitch

  • MODEL: M12 x 1.25 Metric Tap and Die set, Material: HSS.
  • ROUND THREAD DIE: Not easily broken tooth chip fast, abrasion resistance and long service life..
  • THREAD TAP: debris rapidly discharged in the tank. No blocking, fast efficiency and high efficiency..
  • CHARACTERISTICS: Heat treated and tempered for file hard threads and a long, useful life..
  • PACKAGE INCLUDES: 2pc M12 x 1.25 Metric TAP & 1pc M12 x 1.25 Metric DIE.
Check Stock

60 PCS Tap and Die Set Metric and Standard Sizes Included Tap Die Kit Metric and SAE for Threading and Rethreading Internal and External Threads

  • SAE & METRIC TAP & DIE SET: These 54 Orion Motor Tech taps and dies cut and clean internal and external threads in common conventional and metric sizes.
  • the set also includes adjustable tap and die wrenches, a T-handle tap wrench, a 1/8" flathead screwdriver, and a thread pitch gauge to cover all your needs.
  • USER-FRIENDLY DESIGN: Our standard and metric tap die set is engineered to tight tolerances to meet professional needs.
  • the tap ends are 5-10mm long to allow easier use with the provided wrenches.
  • WIDE APPLICATION: These threading tools work perfectly to correct or create internal and external threading through wood, copper, aluminum, iron, carbon steel, and more!.
  • CHROMIUM STEEL: The thread repair set is constructed with GCr15 bearing steel heat treated for durable and corrosion-free performance with satisfying longevity.
  • BLOW-MOLDED CASE: The blow-molded case stores and organizes the tools, providing easy portability wherever you need them to thread and rethread internal and external threads.
Check Stock

uxcell 5 Pairs Metric Hand Threading Tap Set M6 Thread 1mm Pitch Taper & Plug Milling Taps Straight Flutes High Speed Steel

  • Metric Taps: M6 x 1 metric taps set. Taper style: starts the thread square with the workpiece. Plug style: generally used in through holes..
  • Applications: The hand threading tap kit is used to re-thread damaged or jammed threads. Suitable for threading mild steels, aluminum, iron, copper, hard plastic..
  • Easy to Use: Hand tapping, mainly used with tap wrenches. Standard thread milling taps are used to thread through holes or shallow and blind holes..
  • Features: Straight flute design, downward chip removal. High speed steel tool is high hardness, high strength, good toughness, and wear resistance..
  • Tips: Add appropriate tapping oil for higher quality internal threads and more durable taps. Without any additional coatings, good for general purpose applications..
Check Stock