Best Barbed Hose Splicers

JoyTube Brass Hose Barb Fitting Metals Splicer Mender 1/4 Barb Hose Union Fuel Gas Water Air Pack of 12

  • Connections: 1/4” to 1/4”. Our hose barb fitting is long enough,which make sure it can insert hose but not easy to be apart. Our barb union will provide good seal when you use it to connect hose..
  • Application of our barb splicer is very wide, such as Temperature control circuits, pneumatic circuits, vacuum and fluid systems test apparatus, lubricant, coolant lines.(Air/Water/Fuel/Boat/Gas) ..
  • Connects to a hose on both ends. Union coupling for connecting two hoses with the same diameter in a straight run..
  • Brass barb union for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
  • The barbed stems create better tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (not include)..
Check Stock

FERRODAY Stainless Steel Quick Disconnect Set 1/2 NPT Female Disconnect 1/2 Barb Brewing Quick Disconnect For Wort Pumps for Wort Chiller Connectors for Ball Valve Hose Fitting & O-rings

  • 【304 Stainless Steel 】 The FPT quick disconnect is made of top quality 304SS that will last a lifetime. The internal o-ring is food grade....
  • 【Quickly Switch Lines Between Equipment】 1/2 NPT thread quick disconnect can attach to any 1/2 male thread fitting(ball valve, wort chillers,....
  • 【Push-On Hose Fittings 】Firstly you need to pull up the collar on the barbed quick disconnect, then put the Female fitting into the barbed quick....
  • 【No Leaks】The barbed quick disconnect has a red silicone gasket inside. It will create a tight seal for liquid & gas between FPT fitting and the....
  • 【Connection Easily】This quick disconnect set allows one hand operation of take on/ take off. All parts fit together very well . The FPT quick....
Check Stock

EVIL ENERGY 6AN Female to 3/8 Push on Hose Barb Fitting Adapter Straight Swivel Aluminum Alloy Black

  • Female 6AN to 3/8 inch push on hose barb connector is made of aluminum alloy 6061-T6 for the transition from pipe threaded connector to hose ,which is....
  • -6AN thread size is 9/16 UNF, used for 6AN male thread fitting.
  • The barb can use in 3/8" inner diameter fuel hose..
  • Simple installation - Female thread adapter: only need to tighten the thread.barb adapter: put the hose over the barb and use a hose clamp to tighten....
  • Note:Barbed style fittings are limited to relatively low pressures(usually below 4000 psi)due to the limitations of the soft and flexible....
  • EVIL ENERGY provide this product have 3-month warranty.Please contact us first if you have any doubts after receiving the product..
Check Stock

Beduan Stainless Steel 1/4 Hose Barb 3 Way Tee T Shape Barbed Co2 Splitter Fitting Pack of 2

  • Material: Made of 304 stainless steel, corrosion resistant ductility at high temperatures, and low magnetic permeability..
  • Size: 1/4”Barb x 1/4”Barb x 1/4”Barb – 6mm Barb x 6mm Barb x 6mm Barb..
  • Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately)..
  • Hose fittings are used in systems such as beer brewing, air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation..
Check Stock

Good Sealing Compression Ferrule Connector Tee Effective Sealing Tee Equal Diameter 316 for Natural Gas for Complicated Pipeline for Solar Energy(Ф3)

  • Simple push in design for connecting to the tube and provide secure connection, requires no extra sealing..
  • This straight connector has barbed ends to create a tight seal on a hose when used with a hose clamp or crimp sleeve or ferrule (not included)..
  • - Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems..
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
  • Hose fittings are used in systems such as air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation..
Check Stock

Kalolary 150 Pieces 1/4’’ Straight Barbed Connectors Fitting Drip Irrigation Fitting Drip Irrigation Barbed Coupling Single Barbed Connector for Irrigation Tubing System and Garden

  • 【Package Includes】150 pieces of 1/4 inch irrigation straight coupling connectors are included in 1 set. Sufficient quantity to use or take as backup,they are practical fittings for tubing..
  • 【Fits 1/4 inch irrigation hose】This barbed coupling fittings connect two sections of any brand 1/4" drip irrigation tubing in a straight line. Two barbed ends makes the connection more strong and firm. Note:Please check the size carefully before purchasing..
  • 【Long-lasting】Made of high quality engineering plastics, durable, strong, water resistant, chemical-resistant materials to assure long life..
  • 【Easy to Insatll】Directly insert this irrigation coupling at the ends of the water pipe, there is no need of any glue or tools, making garden work more convenient and much easier. Tips: Heat the end of hose to help it slide on this coupling..
  • 【Wide range of applications:】This coupling fittings for 1/4 inch irrigation tubing helps to build a maintenance-free irrigation system, it is ideal to be applied for garden, greenhouse, flower bed, patio and other agricultural watering system..
Check Stock

DERNORD 1/2 Barbed Hose x 1/2 NPT Female - Home Brew Fitting 304 Stainless Steel Pack of 2

  • Great for attaching 1/2" inner diameter hose, and 1/2" ball valve.
  • Temperature range from -30 to +150 degrees F.
  • 304 stainless steel for strength and resistance to corrosion.
Check Stock

Gardrip Drip Irrigation Cross Fittings:45 Pieces 1/4 Barbed 4-Way Cross Irrigation Parts with Sharp End Fits for 1/4 Inch Drip Irrigation Tubing Drip Line Cross Tee Connectors for Garden Lawn Irrigation System

  • 【45 Pieces Barbed Cross Fittings】:The package includes 45 pack drip irrigation cross 1/4 inch in total. Gardrip barbed cross is designed to connect four lengths of 1/4" Drip tubing in an 90-degree 2-way shape..
  • 【Fits 1/4 Inch Drip Irrigation Tubing】:These 1/4 drip line cross connector is compatible with most of 1/4 drip irrigation tubing. Please check the size of your 1/4 irrigation tubing carefully before purchasing..
  • 【Durable & Reliable Drip Irrigation Barbed Elbow】:Made of high-impact plastic material, Gardrip 1/4 inch universal cross fitting for drip irrigation tube are more durable and reliable than others. It won’t deform or break easily and assure long-lasting life. One-piece construction adds strength, durability and long term performance..
  • 【Easy Installation & No Leaks】:Easy to install, no need of tools, glue or clamps. Simply insert this 1/4 irrigation cross connector, the protruding barbed ends can grab 1/4" tubing tightly for a secure leak-proof connection. If desired you may heat the end of the tube in hot water for 10-30 seconds before inserting..
  • 【Wide Application】:These irrigation cross kit for 1/4 inch sprinkler hose is ideal for raised garden beds, landscaping, greenhouse, farm, lawn, patio and ot....
Check Stock

LIONMAX Barb Splicer Mender 4 PCS, Brass Barb Union Hose Fittings, 5/16 Inch to 5/16 Inch Barb Hose ID, with 8 Hose Clamps, for Air/Water/Fuel/Oil

  • 【SOLID BRASS MATERIAL】Barb fitting is made of brass. Strong and durable, not easy to rust and corrode. Has a long service life. NOTE: Brass barb hose fitting is not suitable for potable water..
  • 【-65~250°F 150PSI】Hose barb fitting has strong temperature resistance and good pressure resistance. So barb union splicer fitting is often used for water, fuel, oil delivery..
  • 【PACKAGE CONTAINS】5/16'' hose ID barb fitting (4 PCS) + 304 stainless steel hose clamp (8 PCS). You don't need to buy additional accessories..
  • 【TIGHT CONNECTION】5/16 inch ID hose barb fitting is smooth overall without burrs. Size meets the standard. The strong barb and hose clamps make the barbed hose splicer not easy to leak during the connection process..
  • 【WIDE APPLICATION】Brass barb hose fitting is suitable for pipe repair. Various hoses can be connected to 5/16'' hose ID hose barb fittings. Meet your multiple needs..
Check Stock

Anderson Metals - 57001-1616 Brass Hose Fitting Connector 1 Barb x 1 Male Pipe

  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Relative softness of brass threading when compared to other metals allows for a tight seal.
  • Barbed shank provides secure connection to hose.
  • Temperature range from -32 to +140 degrees F.
  • Intended for use with hose clamp or crimp type ferrule (sold separately).Note: Kindly refer size chart image before purchase.
Check Stock