Best Barbed Straight Fittings

EcoPlus Eco 396 Water Pump Fixed Flow Submersible Or Inline For Aquariums Ponds Fountains & Hydroponics - UL Listed 396 GPH Black

  • Included fittings: three-0.75“ Barbed x 0.75“ Threaded, two-0.5“ Barbed x 0.75“ Threaded and Nozzle x 0.75“ Threaded.
  • Suitable for installation on dry land for in-line use or submersibly into the water.
  • Suitable for use in hydroponic systems, ponds,fresh and saltwater aquariums, fountains and filter systems.
Check Stock

(100' ft Roll) - USA Made - 1/4-Inch x Irrigation/Hydroponics Dripline with 6-Inch Emitter Spacing (Brown) (100' Foot Roll)

  • FIT: Use With 1/4" Fittings - 6 inches pre-inserted emitter spacing, 1/2 GPH flow rate from each emitter, 100 feet Length.
  • DURABLE: Resistant to chemicals and fertilizers commonly used in landscaping.
  • EASTY TO USE: Flexible tubing for easy installation - Attach to 1/2" Drip tubing with 1/4" barbed fittings.
  • OPERATING PRESSURE (PREVENT LEAKS & BLOWOUTS): 10-25 PSI (Minimum of 150 mesh filtration).
  • EMITTERS: Flow regulated, self flushing inline emitters deliver equal flow at a wide range of operating pressures.
Check Stock

Raindrip R560DP Automatic Drip Irrigation Watering Kit with Timer for Containers and Hanging Baskets Waters up to 20 Plants Includes Timer with Customizable Settings and 20 PC Drippers,Black

  • SAVE TIME AND EFFORT: This plant watering kit has everything you need to get started with drip irrigation and precisely water up to twenty individual plants.
  • Use the kit to build, expand, or repair a drip irrigation system.
  • INSTALL IN 3 EASY STEPS: 1) Connect timer and tubing to water source.
  • Customizable system for your garden's potted plants, hanging baskets, or planter beds.
  • IDEAL FOR ANY LEVEL GARDENER: Easy to customize, install, and operate.
  • Kits contain all the components you need to set up your own drip system.
  • EASY TO CONNECT: screw threaded ends together.
  • push barbed ends on fittings and emitters into tubing opening.
  • KIT INCLUDES: Water timer, 75 ft. of 1/4 in. supply tubing with 3/4 in. FHT adapter, 20 PC drippers, tubing hold-down clamps, barbed couplings, elbows, and tees.
Check Stock

Dixon Valve BPM2 Brass Fitting, Plug, 1/4\ Push-On Hose ID Mender

  • Push-on fittings are intended for use with Lok-On (push-on style) hose only.
  • Lok-On fittings will properly grip Lok-On hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap.
  • Size: 1/2" NPTF male x 1/2" hose ID barbed.
Check Stock

Seawhisper Punch Style Felting Needle Tool with 7 Barbed Needles Craft Wool Felt DIY Stitch

  • Material: PVC / Alloy, Size: 3cm x10cm. Suitable for wool, or all kinds of soft material..
  • Needle felting is the process of punching barbed needles through roving laid over a surface fabric. When done, the barbs on the tool's needles grab the roving and pull it down through the surface fabric. This causes the roving to become tangled through the weave of the fabric, leaving it attached. Needle felting is fast and easy, and the results are incredible. Here you have a very popular tool for just that..
  • The needle felting tool holds 7 triangular felting needles in a small area to help make felting faster. The barbed needles are easily interchangeable so you can use the right gauge needle for your project. Good needle felting supplies with a Clear Lock Cover even for the beginner..
  • Package Included- 1 x Punch for felt (With 7 Triangular Felting Barbed Needles- ideal for felting soft fabrics.).
  • Notice: The needles should be punched in and come out the same direction, e.g., Straight into the straight out....in at an angle, out at the same angle. Otherwise, the needles can be easily broken..
Check Stock

Little Giant SPDK Sump Pump Discharge Hose Kit, 1-1/4” Hose – 1-1/2” & 1-1/4” Adaptors, 24-Feet

  • SUMP PUMP HOSE: Sump Pump Discharge kit includes 1-1/4" and 1-1/2" NPT barbed adapters.
  • DISCHARGE HOSE: It is Ideal for discharging water out of a basement sump pit to a safe location outside of the home. Kit includes 24' corrugated polyethylene hose.
  • COMPATIBLE HOSE: It is compatible with sump pumps with 1-1/4 inch FNPT or 1-1/2 inch FNPT discharge. It includes ABS thread x barbed adapter and galvanized steel clamps. IT IS NOT COMPATIBLE WITH GARDEN HOSE FITTINGS.
  • WATER PUMP HOSE DIMENSION: The sump pump discharge hose kit is of opening size 20 x 17 x 5.5 inches.
Check Stock

FERRODAY Stainless Steel Quick Disconnect Set 1/2 NPT Female Disconnect 1/2 Barb Brewing Quick Disconnect For Wort Pumps for Wort Chiller Connectors for Ball Valve Hose Fitting & O-rings

  • 【304 Stainless Steel 】 The FPT quick disconnect is made of top quality 304SS that will last a lifetime. The internal o-ring is food grade....
  • 【Quickly Switch Lines Between Equipment】 1/2 NPT thread quick disconnect can attach to any 1/2 male thread fitting(ball valve, wort chillers,....
  • 【Push-On Hose Fittings 】Firstly you need to pull up the collar on the barbed quick disconnect, then put the Female fitting into the barbed quick....
  • 【No Leaks】The barbed quick disconnect has a red silicone gasket inside. It will create a tight seal for liquid & gas between FPT fitting and the....
  • 【Connection Easily】This quick disconnect set allows one hand operation of take on/ take off. All parts fit together very well . The FPT quick....
Check Stock

Spears 1435 Series PVC Tube Fitting, Adapter, Schedule 40, Gray, 2" Barbed x NPT Female

  • Adapter for connecting pipes or fittings of different types.
  • Fitting connects to schedule 40 PE pipe on one end and has an NPT female connector on the other.
  • PVC for strength and resistance to reactions with acids, gasoline, alcohol, and hydrocarbons.
  • Barbed fitting creates a tight seal on flexible pipe when used with a hose clamp (sold separately).
  • Meets ASTM D 2609 standards for plastic insert fittings and certified by NSF for use with potable water.
Check Stock

Performance Tool W5215 Performance Tool SAE/MET Grease Fitting Assortment - 70 Piece

  • METRIC FITTINGS: 6 mm – 1 Straight (10 pcs).
  • CASE: Convenient re-sealable container for storage and transport.
  • Overall size: 23 7/8-inch x 25-inch x 31-inch.
Check Stock

FULAIERGD 1/4 Barb Connector Plug Cap Rubber Plug Fitting for 1/4 Hose Irrigation System 1/4 Barb Plug Cap,40PCS/Pack

  • 【Package included】40x 1/4 Barb Plug Cap.The 6-way connector is for display only, if necessary, please purchase it separately. Thanks!.
  • 【Applicable Size】This plug fits most 1/4" barbed fittings.
  • 【High quality】made of new synthetic rubber, and it has excellent heat resistance, which can be used for many years in any weather..
  • 【No leakage】Can help you optimize your irrigation system, if you don't want to use a 1/4" Barbed Shunt, you can use it, Very good water stop effect。.
  • 【Wide application】suitable for 1/4" irrigation system accessories.
Check Stock