Best Barbed Tank Fittings

FERRODAY Stainless Steel Quick Disconnect Set 1/2 NPT Female Disconnect 1/2 Barb Brewing Quick Disconnect For Wort Pumps for Wort Chiller Connectors for Ball Valve Hose Fitting & O-rings

  • 【304 Stainless Steel 】 The FPT quick disconnect is made of top quality 304SS that will last a lifetime. The internal o-ring is food grade....
  • 【Quickly Switch Lines Between Equipment】 1/2 NPT thread quick disconnect can attach to any 1/2 male thread fitting（ball valve, wort chillers,....
  • 【Push-On Hose Fittings 】Firstly you need to pull up the collar on the barbed quick disconnect, then put the Female fitting into the barbed quick....
  • 【No Leaks】The barbed quick disconnect has a red silicone gasket inside. It will create a tight seal for liquid & gas between FPT fitting and the....
  • 【Connection Easily】This quick disconnect set allows one hand operation of take on/ take off. All parts fit together very well . The FPT quick....
Check Stock

Spears 1435 Series PVC Tube Fitting, Adapter, Schedule 40, Gray, 2" Barbed x NPT Female

  • Adapter for connecting pipes or fittings of different types.
  • Fitting connects to schedule 40 PE pipe on one end and has an NPT female connector on the other.
  • PVC for strength and resistance to reactions with acids, gasoline, alcohol, and hydrocarbons.
  • Barbed fitting creates a tight seal on flexible pipe when used with a hose clamp (sold separately).
  • Meets ASTM D 2609 standards for plastic insert fittings and certified by NSF for use with potable water.
Check Stock

FULAIERGD 1/4 Barb Connector Plug Cap Rubber Plug Fitting for 1/4 Hose Irrigation System 1/4 Barb Plug Cap,40PCS/Pack

  • 【Package included】40x 1/4 Barb Plug Cap.The 6-way connector is for display only, if necessary, please purchase it separately. Thanks!.
  • 【Applicable Size】This plug fits most 1/4" barbed fittings.
  • 【High quality】made of new synthetic rubber, and it has excellent heat resistance, which can be used for many years in any weather..
  • 【No leakage】Can help you optimize your irrigation system, if you don't want to use a 1/4" Barbed Shunt, you can use it, Very good water stop effect。.
  • 【Wide application】suitable for 1/4" irrigation system accessories.
Check Stock

Gardrip Drip Irrigation Cross Fittings：45 Pieces 1/4 Barbed 4-Way Cross Irrigation Parts with Sharp End Fits for 1/4 Inch Drip Irrigation Tubing Drip Line Cross Tee Connectors for Garden Lawn Irrigation System

  • 【45 Pieces Barbed Cross Fittings】：The package includes 45 pack drip irrigation cross 1/4 inch in total. Gardrip barbed cross is designed to connect four lengths of 1/4" Drip tubing in an 90-degree 2-way shape..
  • 【Fits 1/4 Inch Drip Irrigation Tubing】：These 1/4 drip line cross connector is compatible with most of 1/4 drip irrigation tubing. Please check the size of your 1/4 irrigation tubing carefully before purchasing..
  • 【Durable & Reliable Drip Irrigation Barbed Elbow】：Made of high-impact plastic material, Gardrip 1/4 inch universal cross fitting for drip irrigation tube are more durable and reliable than others. It won’t deform or break easily and assure long-lasting life. One-piece construction adds strength, durability and long term performance..
  • 【Easy Installation & No Leaks】：Easy to install, no need of tools, glue or clamps. Simply insert this 1/4 irrigation cross connector, the protruding barbed ends can grab 1/4" tubing tightly for a secure leak-proof connection. If desired you may heat the end of the tube in hot water for 10-30 seconds before inserting..
  • 【Wide Application】：These irrigation cross kit for 1/4 inch sprinkler hose is ideal for raised garden beds, landscaping, greenhouse, farm, lawn, patio and ot....
Check Stock

Anderson Metals - 57002-0604 Brass Hose Fitting, Connector, 3/8\ Barb x 1/4\ Female Pipe

  • Adapter for connecting pipes or fittings of different types.
  • Fitting connects to hose on one end and has an NPT female connector on the other.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately).
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Rain Bird XFD0912250 XF On Surface Dripline Hose Drip Irrigation Dual Layered Tubing Coil with 0. GPH and 12 Inch Spacing, 250 Feet, Brown

  • DEPENDABLE DRIP TUBE: Dependable 0.5-inch distribution tubing runs water from outside faucet.
  • Dimensions (L x W): 250 feet x 0.5 inches.
  • Connects with 0.5-inch barbed or compression fittings.
  • FLEXIBLE: Offers significantly greater flexibility, allowing tighter turns with fewer elbows for easier installation.
  • The pressure-compensating emitter design provides a consistent flow over the entire lateral length ensuring higher uniformity for increased reliability in the pressure range of 8.5 to 60 psi.
  • DUAL-LAYERED: Dual-layered tubing (brown over black) provides unmatched resistance to chemicals, algae growth and UV damage.
  • SPECIFICATIONS: Accepts Rain Bird Easy Fit Compression Fittings, XF Dripline Insert Fittings and 17mm insert fittings.
  • Use an Air/Vacuum Relief Valve Kit when installation is below soil.
Check Stock

Class A Customs 40 Gallon RV Waste Black Water Holding Tank WT-4000

  • 40 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
  • INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
  • INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
  • NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.
Check Stock

Class A Customs 27 Gallon RV Waste Black Water Holding Tank WT-2700

  • 27 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
  • INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
  • INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
  • NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.
Check Stock

Class A Customs 14 Gallon RV Waste Black Water Holding Tank WT-1400

  • 14 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
  • INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
  • INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
  • NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.
Check Stock

Class A Customs 31 Gallon RV Waste Black Water Holding Tank WT-3100

  • 31 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
  • INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
  • INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
  • NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.
Check Stock