Partsam Front Side Marker Light Assembly Replacement for Kenworth T680 T770 T880 and Peterbilt 576 LED Front Fender Side Turn Signal Marker Indicator Lights Smoke Lens, Driver Side and Passenger Side
... lit, trapezoid shaped side turn marker light. These T680 accessories are designed as direct replacements (fits factory plug harness) for several PACCAR model trucks. Compatible with Kenworth T680 / Kenworth T880 / Peterbilt 567 Trucks side marker lights.
These Truck Accessories replace the stock and dull side turn signal on your PACCAR model trucks with our high quality Amber LED Side Marker Turn Signal Light. Made with 3 LED light 3014 Chips, these side turn signal lights will create a bright luminous burst of light each time the lights are signaled and will help other drivers see where you are on the road and know when you need to change lanes, also this replacement helps you pass state inspection and avoid tickets and fines.
This Smoked Amber LED Front Fender Side Turn Signal Marker Indicator Light Comes with 3 Pin Weather Pack Style Connector (Mates to Factory Harness), our turn marker lights are constructed with quality materials and offers OE fit, function and durability without the OE price tag, just plug and play.
It comes with two step brightness and the middle pin is for negative/ground pin, the other two is high and low for truck turn signal and truck clearance lamp.
MFL. 4-Way Isolated DMX Splitter Amplifier Distributor with 3-Pin Outputs
MAKE YOUR DMX FIXTURES ORGANIZED: 4 isolated outputs greatly save your setup time and the use of cable, reducing the risk of a plug failure or tripped over wire..
3-PIN OUTPUT FOR UP TO 32 DEVICES: 3-pin male XLR inputs feed through 3-pin female output. Each output can accommodate 32 separate devices.
KEEP TRACK OF SIGNALS: LED indicators inform you of the status of the signal going to the fixtures..
EASY TO SETUP: Installation of this DMX splitter is a breeze with a detailed user manual. No more spending minutes trying to trace down where the bad connection was!.
PERFECT FOR MULTIPLE SETTINGS: This unit is perfect for any club, bar, stage or mobile show looking to reduce their need for wires, decrease set-up time, and eliminate restrictions on where controllers and fixtures can be placed in relation to one another..
12Pcs CD74HC4067 16-Channel Analog Digital Multiplexer MUX Breakout Board Module CD74HC4067 CMOS Precise Module Compatible with DIY
CD74HC4067 board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer, use the CD74HC4067 16-channel analog signal switch.
It works with both digital and analog signals (the voltage can’t be higher than VCC), and the connections function in either direction.If you want two-way communications,you can add a second board to route your microcontroller's TX line to 16 device's RX lines. By using multiple boards, you can create similar arrangements for I2C,SPI,etc..
The internal switches are bidirectional, support voltages between ground and VCC, have low “on” resistance and low “off” leakage, and to prevent crosstalk, perform “break-before-make” switching. The board also breaks out the chip’s “enable” pin, which when driven high, will completely disconnect the common pin (all switches “off”)..
To control it, connect 4 digital outputs to the chip’s address select pins (S0-S3), and send it the binary address of the channel you want. This allows you to connect up to 16 sensors to your system using only 5 pins..
Since the mux/demux also works with digital signals, you can use it to pipe TTL level serial data to or from multiple devi....
4 Pin S-Video to 3 RCA AV Female Cable for TV PC Computer Video AV Projector for Video TV Laptop Adapter Cable (27cm)
✪ The S-Video to RCA Cable with yellow, red, white female RCA port and black Male 4 pin S-Video plug.It is used for connecting your laptop/computer with 4 Pin S-Video to TV.A quality durable replacement..
✪ S-Video Mini-DIN Plug to 3RCA AV female Cable eamlessly transmits signal for high-definition video and audio,while ensuring reliability and reduced signal loss..
✪ Currently,it is the best in the analog line, and more importantly, it supports HD standards. It can completely transmit high-definition signals from computers and set-top boxes to your high-definition TV, allowing you to enjoy a real high-definition TV..
✪ 4 Pin S-video to 3 RCA AV Female Cable For DVD, TV/HDTV, VCR's, CD players and other video connections for home theater equipment..
✪ Disclaimer: This cable is used for TV box and set-top box wiring. It cannot be used alone. Please make sure the interface is correct before purchasing..
TISINO XLR Female to 1/4 Inch (6.35mm) TRS Jack Lead Balanced Signal Interconnect Cable XLR to Quarter inch Patch Cable - 15 Feet
This Balanced XLR Cable is designed to convert a balanced XLR output to a balanced 1/4" TRS input. These cables are commonly used as speaker leads for active speakers, carrying the audio signal from the mixer to the speaker. They are also widely used as signal cables for stage and studio audio applications..
High strength aluminum alloy die-cast housing, Gold plated connections, 20 AWG Oxygen-free copper core to deliver pristine sound..
Constructed with multi-layers of shielding minimize signal interference and ensure the transmission stable,provides maximum cancellation of hum and noise..
The XLR connector is a high quality metal shielded type with positive locking into the microphone.
The heavy duty 6.35mm TRS connector has 360 degree easy-grip treads for frequent unplugging and durability..
XLR pin 1 is connected to the 1/4" plug sleeve, XLR pin 2 is connected to the 1/4" plug tip, XLR pin 3 is connected to the 1/4" plug ring, balanced audio cables utilize impedance balanced lines that reduce EM and RF noise and extend the effective range of the cable run..
TISINO XLR Female to 1/4 Inch (6.35mm) TRS Jack Lead Balanced Signal Interconnect Cable XLR to Quarter inch Patch Cable - 3.3 Feet
This Balanced XLR Cable is designed to convert a balanced XLR output to a balanced 1/4" TRS input. These cables are commonly used as speaker leads for active speakers, carrying the audio signal from the mixer to the speaker. They are also widely used as signal cables for stage and studio audio applications..
High strength aluminum alloy die-cast housing, Gold plated connections, 20 AWG Oxygen-free copper core to deliver pristine sound..
Constructed with multi-layers of shielding minimize signal interference and ensure the transmission stable,provides maximum cancellation of hum and noise..
The XLR connector is a high quality metal shielded type with positive locking into the microphone.
The heavy duty 6.35mm TRS connector has 360 degree easy-grip treads for frequent unplugging and durability..
XLR pin 1 is connected to the 1/4" plug sleeve, XLR pin 2 is connected to the 1/4" plug tip, XLR pin 3 is connected to the 1/4" plug ring, balanced audio cables utilize impedance balanced lines that reduce EM and RF noise and extend the effective range of the cable run..
MZHOU SATA USB Extension Cable – USB3.0 Motherboard Front 19 Pin Male to Female Extension Cable High-Speed Connection (The Interface Faces Outward)
✔Transfer rate: 5Gbps above,Backward compatible with USB3.0,1.1 version,you can transferring files with all the speed available to the higher standard..
✔USB3.0 is full duplex, independent of the four differential signal USB 3.0 signals, supports simultaneous bi-directional data transfer..
✔With three layers of shielding (one core, two outer layers),Signal interference prevention..
✔Suitable for motherboard with 19 pin USB3.0, male to female for 19Pin extension..
✔Support WINDOWS2003 / 2007 / XP / Vista / WIN7 / WIN8 / WIN10, support plug and play..
Partsam For Freightliner Cascadia Amber LED Side Marker Turn Signal Lights 5-2835-SMD Sealed Replacement for Freightliner Led Side of Cab Turn Marker / Parking Lights Clearance Lamps (Pack of 2)
Fitment: Designed specifically as a direct replacement (plug-n-play) for the later model (2nd generation) 2008 2009 2010 2011 2012 2013 2014 2015 Freightliner Cascadia Side Turn Marker Light, Also it fits other Freightliner Models.
Replace the stock and dull side turn signal on your Freightliner Cascadia with our high quality Amber LED Side Marker Turn Signal Light. Made with 5 LED light 3528 Chips, these turn signal lights will create a bright luminous burst of light each time the lights are signaled and will help other drivers see where you are on the road and know when you need to change lanes,also this Replacement helps you pass state inspection and avoid tickets and fines.
Comes with 3 Pin Weather Pack Style Connector (Mates to Factory Harness), our turn marker lights are constructed with quality materials and offers OE fit, function and durability without the OE price tag, just plug and play.
It comes with two step brightness and the pin at the higher side is for negative/ground pin, the other two is for high and low.
Direct replacement for Freightliner Cascadia left and right position.
High impact polycarbonate lens and housing are sealed to prevent damage from moisture and corro....