Fuel Pump with Gasket - Compatible with Johnson Evinrude Outboard Motor - Pre 1993 6hp 9.9hp 15hp Models - Replaces Part 395091 397839 18 7350 397274 391638
Replacement Fuel Pump for Outboard Motors. Pre 1993 engine models. Fixes common issues.
motor wont run at full power or will only run with choke on..
Replaces Part numbers - 397274, 397839, 391638, 395091, 9-35350, and 18-7350.
Compatible replacement for Johnson Evinrude Outboard Boat Engines produced up to 1993. Including 6hp, 8hp, 9.9hp, and 15hp.
Factory quality, fit, and finish. Each fuel pump is carefully assembled and tested to insure flawless performance on your Outboard motor. Each fuel....
Backed by a 2 YEAR WARRANTY, rest assured your boat will be back to full power..
Outboard Motor, 2 Stroke 12 hp 246cc Heavy Duty Boat Engine Fishing Boat Motor w/CDI System Water Cooling System
Short axle: axle length 381 mm (15 inches) suitable for boats below 44 cm（17.32inches） (inclusive) transom height.
two-stroke water-cooled outboard engine must put the machine in the water to start the machine to start (do not start the machine on shore).
2-stroke water-cooled outboard engine uses the specified two-stroke engine oil in strict accordance with the instructions Mix it with No. 87 gasoline and use it in the correct proportion. Do not use four-stroke engine oil, automobile engine oil, Gear Oil.
Attention: It is strictly forbidden to start the machine on the shore. The two-stroke outboard engine should use a mixture of two-stroke engine oil and gasoline. The new machine is running in within 10 hours. The fuel ratio is 30L gasoline: 1L engine oil, and the ratio is oil after 10 hours. 50L: Oil 1L must ensure that gasoline and oil are fully mixed, otherwise it will damage the machine.
The ignition system of this outboard motor has a CDI ignition system. So you can start the motor quickly and safely, which saves your time and is very convenient to use. This outboard adop....
Outboard Motor, 6hp Heavy Duty Boat Engine Fishing Boat Motor w/CDI System Water Cooling System (2 Stroke 6 hp)
Short axle: axle length 381 mm (15 inches) suitable for boats below 44 cm（17.32inches） (inclusive) transom height.
Hangkai two-stroke water-cooled outboard engine must put the machine in the water to start the machine to start (do not start the machine on shore).
Hangkai two-stroke water-cooled outboard engine uses the specified two-stroke engine oil in strict accordance with the instructions Mix it with No. 87 gasoline and use it in the correct proportion. Do not use four-stroke engine oil, automobile engine oil, Gear Oil.
Attention: It is strictly forbidden to start the machine on the shore. The two-stroke outboard engine should use a mixture of two-stroke engine oil and gasoline. The new machine is running in within 10 hours. The fuel ratio is 30L gasoline: 1L engine oil, and the ratio is oil after 10 hours. 50L: Oil 1L must ensure that gasoline and oil are fully mixed, otherwise it will damage the machine.
The ignition system of this outboard motor has a CDI ignition system. So you can start the motor quickly and safely, which saves your time and is very convenient to use. This outboard adopts an international standard air intake system and compression ratio, which can effectively improve combustion efficiency and thus reduce fuel consumption. It....
VEVOR Boat Motor Stand, 130 LBS Outboard Motor Carrier, 60 KG Outboard Engine Stand, Two Wheels Boat Motor Dolly, Heavy Duty Multi Purposed Portable Boat Motor for Motor Repair, Maintenance, Storage
STEEL CONSTRUCTION: With tubes made of steel, the boat motor cart, weighing about 32lbs, can hold up to 315lbs. And the hanging board is made of solid wood, more sturdier for holding the outboard motor..
WHEELS FOR MOBILITY: The boat motor cart is designed with 2 universal front caster wheels and 2 rear wheels composed of 2 single wheels. And with wheels, moving it around will be easier..
MULTI-PURPOSE: The boat motor cart is ideal for the storing, maintaining and transporting the outboard engine in the garage. It can help you hold the outboard engine for repair or maintenance..
ASSEMBLY REQUIRED: Assembly is needed. And the overall dimension of the cart is about 26'' W x 43''D x 46''H. TIP: It would be better if you do not fully tighten the screws until all the parts are lined up properly..
ERGONOMIC HANDLE: Being designed with 2 handles allows you to steer and move the cart more conveniently. You can move it around the garage at ease..
Newport Trolling Motor Transom Motor Mount - Kayaks - Freshwater and Saltwater - 1 Size
3 HORSEPOWER: The Newport Transom Mount is a 3 horsepower maximum rated product that is designed specifically for small outboard motors and transom trolling mounted trolling motors. This product is made from high quality materials and is designed for durability and performance..
CORROSION RESISTANT: Saltwater and Freshwater compatible, the Newport Transom Mount is a salt water and freshwater compatible transom mount that is designed for use with electric trolling motors. This transom mount is made of durable Aluminum and features a quick-release 4- bolt mount for easy installation and removal..
FITS MOST KAYAKS: Widely used 3.75" x 4.75" bolt pattern This transom mount is widely used for its 3. 75 x 4. 75 bolt pattern. It fits most outboard motors and trolling motors and fits majority of Kayak models. The Newport Transom Mount is made of durable aluminum..
REMOVABLE AND REPLACEABLE POLYMER TRANSOM PLATES: The Newport Transom Mount is a removable and replaceable polymer transom plate that can be easily installed on any boat. The plate is designed to provide a strong and durable mounting surface for a variety of out....
6.5HP 4 Stroke Outboard Motor Fishing Boat Manual Start Engine Short Shaft Boat Engine Motor w/ Water-Cooling Motor CDI System Tiller Control 123CC US
CDI Ignition System: This outboard motor features a CDI ignition system. You can start the motor quickly and safely. It saves your time and is convenient to use..
High Efficiency: The outboard motor with a superior engine water cooling system can overcome huge water resistance, increase driving speed and improve its efficiency..
360-Degree Steering Function: This outboard has a 360-degree steering function that allows you to reverse the boat at ease without shifting gears..
Independent Fin Streamline Design: When it collides with an object underwater, the design can well protect the propeller that is running at high speed..
Customer Service: We aim to provide quality products and services. If you have any problems, please feel free to contact us. We will reply and solve the problem for you as soon as possible..
New Tilt Trim Motor with Reservoir Replacement For Mercury Mariner 50HP-125HP 809885A1, 809885A2, 809885T2, 813447, 819479A1, 819480A1, 885654T1, 18-6777, PT496NK-2, ARC6276, ARC5275
This starter motor assembly is for 40 hp through 60 hp 4-stroke Mercury and Mariner outboards..
Same starter assembly as originally installed on your outboard or as an electric start option..
Designed and built for outboard motor applications..
See your owner's manual or service manual for specific applications and replacement instructions..
Produced to meet Mercury Marine original equipment manufacturer specifications to maximize the performance of your Mercury and Mariner outboard or MerCruiser stern drive.
Minn Kota E-Drive - Electric Outboard - 2Hp - 48V - 20" Shaft
♛ 246CC Outboard Stroke Petrol Heavy Duty Boat Engine Motor Description -- Displacement: 246CC.
Recommended Lubricant: 2 Stroke Lubricating oil.
♛ Outboard Stroke Motor Boat Engine Works with little noise.Economical and compact structure. Durable, lightweight and and easy to carry,anti-corrosive construction. forward and neutral design.Maneuverable and safe twist grip throttle control.Packing size: 133x71x38.5cm.
Recommended Propeller range: 3 -9"1/4''x8".
♛ Outboard vertical mount engine design for increased power, performance and durability, superior CDI Ignition system for increased efficiency, twist grip throttle handle and engine stop button for improved response..
