lets you range at rest or full draw up to 100 yards on game or up to 300 yards on reflective targets.
Customizable for single-pin and multi-pin configurations or manual pin selection.
1 year of battery life with 2 Lithium AAA batteries (not included).
Notice: Some jurisdictions regulate or prohibit use of this device. It is your responsibility to know and comply with applicable laws and rights to privacy in jurisdictions where you plan to use this device..
lets you range at rest or full draw up to 100 yards on game or up to 300 yards on reflective targets.
Customizable for single-pin and multi-pin configurations or manual pin selection.
1 year of battery life with 2 Lithium AAA batteries (not included).
Notice: Some jurisdictions regulate or prohibit use of this device. It is your responsibility to know and comply with applicable laws and rights to privacy in jurisdictions where you plan to use this device..
DTMF advantages including fast and reliable transmission and high transmission speed.
1 year radio warranty and 30 days no reason to returnDescriptionEasy to operate and learn, even if you are not a radio expert, you will find all the controls in a consumer friendly workbench setup.
The RT-5R is the best walkie talkie for the outsider workwer,because it is profesional ham radio ..
25KHz/12.5KHz Switchable FM Radio (65.0MHz-108.0MHz).
Interesting Stories For Curious People: A Collection of Fascinating Stories About History, Science, Pop Culture and Just About Anything Else You Can Think of
...utput Protection. SCP: Short Circuit output Protection). Tested Units. In Great Working Condition. UpBright 30 days Refund. 24 Months Exchange..
UpBright New Global 3-Prong Connector 29.4V AC / DC Adapter Compatible with Jetson Extreme Terrain Z12 XT Z12XT Galaxy 25.2V 4.0Ah 25.2 V 4.0 Ah 25.2VDC 4000mAh Lithium-ion Battery Hoverboard Hover Board Scooter Rave By Jetson Board 29.4VDC 1.0A - 1.5A DC29.4V 1A 29.4 V 1000mA 1500mA 29.4 VDC Switching Power Supply Cord Cable PS Battery Charger Mains PSU (w/ 3-Pin 3Pin End Connector).
⚠️(Please Note! that the "Jetson Hoverboard" available in a number of different Models Number and Connectors. Please Make sure Your Model or P/N : Match this Listing. Thank you.).
⚠️!!!Note: Rechargeable batteries don't last forever, the average battery last 1 to 3 years. If the battery is old/dead, it will not accept a charge. But not charger's problem. If you're not sure whether battery or charger is dead or not. You must have a volt meter in order to tell whether or not a charger is working..
OLLGEN 3M/10ft OBD II Vehicle ECU Emergency Power Supply Cable Memory Saver with Alligator Clip-On 12V Car Battery Cigarette Lighter Power Socket Extension Cable
Cigarette Lighter with Alligator to OBD2 16 Pin Male Connector Power Cable :Powered by any jump starter with a 12V outlet into an OBD II Memory Saver.Plug it into the OBD Male connector of the vehicle, plugging the cigarette connector into the clip cords, hooking it up to a 12V battery source.Note:This device can work with any 12V DC power source, including jump starter, DC 12V Lead-acid battery, or another car’s DC 12V power outlet..
Super Long 10ft (3meters) Cable: plenty long until you try connecting it to another car's battery or cigarette lighter. In this way, you can change your car battery, also by get the alternative 12V power source from another car, when you not have a jump starter on hand..
8 amp fuse built into the memory saver, better reliable on overload protection. Powered by any jump starter with a 12V outlet into an OBD II Memory Saver. Interface connector between a 12V DC power source and vehicle's OBD II port. Preserves vehicle codes and electronic presets. Replacing a car battery on older vehicles used to be simple!! You unhook the old battery and install the new one..
Work no problem as all ODBII ports :It works on any vehicle with OBDII which is 1996 and later (You will be plugging one end into it). It is not needed or required t....
D&O Lighting Dual D-Tap Battery Charger, Li-Ion Gold Mount and V Mount Battery Charger for Broadcast Video Camera and Professional Camcorder Batteries, Compatible with Sony, Comer and More
DUAL D-TAP CHARGER for gold and V-mount batteries keeps your broadcast camera or DSLR camera powered-up and ready for action. The D&O Lightning Camera Charger charges any battery with a D-Tap socket..
FAST-CHARGING D-tap power converter with AC adapter plugs into a wall outlet to charge 2 gold or V-mount batteries at once. Our gold and V battery charger fully recharges batteries in about 3 hours..
4-PIN XLR PORT lets you use this versatile V- and gold mount battery charger as a DC power supply for a DLSR camera or camcorder. Our lithium battery charger is travel-friendly at 4.9” x 2.8” x 1.4”..
WIDELY COMPATIBLE Comer Battery Charger with dual D-tap heads can be used to recharge Sony V-Series, Gold Mount, Red One MX, F3 FS700, 5D2, 5D3, D3, D700 and D800 with the 4-pin XLR port..
12-MONTH WARRANTY against manufacturer defects lets you choose the D&O Lighting Gold and V-Mount Charger with confidence. In the unlikely event of a defect, we will repair or replace the unit without charge..
MakerFocus ESP32 Development Board Upgraded Version 8MB Flash, ESP32 WiFi Bluetooth, ESP32 OLED 0.96 Inch OLED Display & 4pcs 3.7V Lithium Rechargable Battery JST1.25 Connector 2pin
[This is an upgraded version WiFi Kit 32! ] What's the Upgrade of New WiFi Kit 32? 1. 4MB (32M-bits) FLASH upgrade to 8MB (64M-bits) FLASH.
2. Better 2.4GHz antenna design and impendence matching.
3. Basic low power design (800uA in deep sleep).
4. Add battery power detection circuit. Use ADC2_4 (GPIO 13) to read battery voltage. Please get the example link from the product description below.
5. Add Vext power output pin, users can use this pin to drive some external device (sensor, motor etc.), when system need into deep sleep mode, Vext can be turn off. This pin was controlled by GPIO21, for example: Turn ON: digitalWrite(21, LOW).
8. Circuit optimization, system more stable.
After some customers reflected the reversed connectors, we have modified the connectors now, so all the new batteries are correct correct polarity now, you don't need to switch the polarity of the two wires. Thanks a ton for every customer's suggestion and support..
This product interface is JST1.25 pitch male, it can be matched with some ESP32 Development Board that it come with Female JST 1.25 mm connectors， The maximum operating curr....
ANDYCINE A6 Plus 5.5 Inch Touch Screen Camera Field Monitor 1920x1080 resolution accept the 4K HDMI Signal Support 3D Lut，Waveform，Camera Focus Monitor With Battery,Carry Case,Sunshade
[3D Lut Supported Monitor] The monitor will load 3D Lut files via the SD card slot. You can easily load, edit, and display your files.Max 50 lut file can be loaded. 【8V DC Output】Real-time to power your dslr cameras (For selected Sony, Nikon, Fuji, Canon Cameras).
[Quad Power Source]Accepts the np-f series battery as well the Canon LP-E6 battery as power source. Beside those, the monitor accept the DC Adapters(5.5MM/2.1MM Pin Dimension) Meanwhile, the monitor enable the UBS-C power port can be powered by power banks or v mount batteries.DC Adapters and power bank were NOT Included （Package include an np-f550 battery& charger cable）***Please remove the battery after use in case the monitor will drain the battery out.
[Adequate Package Contents and Sound Service]The package include battery and charger cable, carry case, micro to hdmi cords,no more extra coin need to spend after the first purchase.We provide the sound after-sale service. You can send us message to get free return and replacement within 1year warranty frame on any quality issues.
