AMEXMART 4x6 LED Headlights with Red Evil Eye DRL Rectangular H4656 H4651 H4642 H4652 Replacement Headlamps Compatible with Peterbilt 379 Kenworth T800 Semi Trucks-2PCS
【Full Functions】The 4X6 Led Headlight comes with High/Low Beam,daylight functions.It has RED DOT center light to make your car looks "EVIL".The perfect cut-off line is sharp and straight, will NOT blind others' eyes while providing the brightest and widest vision..
【Excellent Light Beam】[email protected] beam, [email protected] beam. With PMMA big projector convex len for high beam, which can make the high beam have longer lighting distance compare with other headlight. The Arc shape low beam lens make the low beam light wider to increase visibility..
【300% More Bright】Built with high intensity led chips.Upgrade your car with this 4X6 INCH led headlight, you will get 300% more brightness for your vehicle. Perfect for Replacing Halogen and HID Xenon Sealed Beams..
【Waterproof Design】Sealed beam design with waterproof rate IP68. It also comes with breathing vents for double protect. The foggy will go out easily through the breathing hole. Note: Please don't worry, when lens becomes foggy, You just need to open breather valve cap at back side. Advanced cooling system extends the li....
Fullkk Magic High Temperature Resistant Liquid Metal Welding Filler, Appliances Casting Repair Glue, Metal Repair Gel Paste (1 Set(A+B), 20g)
【Liquid Metal Welding Filler】: Developed as an alternative to torch welding, it provides strong and long-lasting repairs to metals and multiple other surfaces. It will bond almost any clean surface that is free of dirt and oil..
【Castings Repair Glue】Mainly used for iron and steel casting, sand holes and holes, and casting defects such as cracks. It can be used to repair fuel tanks, pipes, concrete breaks, and a whole set of more..
【High-Temperature Resistance】Welding glue for metal, can withstand a temperature of 150°C. When fully cured, it is as hard as iron and provides uniform bond line thickness..
【Simple To Use】A permanent adhesive is formed after mixing, which can be shaped, beaten, filed, sanded, and drilled after curing. It has a 1:1 mixing ratio, 6 minutes setting, and complete curing within 4-6 hours. Before using the glue, clean and dry the surface and finish the work within 20 minutes after mixing..
【Do it Yourself】Big or Small, you can DIY it with this magic welding glue. Our heavy-duty epoxy and adhesives repair & restore it right the first t....
Spot Welder, Seesii 11000mA-h Battery Spot Welder with LCD Screen Upgraded Enhanced 80 Gears Adjustable Portable Mini Spot Welder with 2x5M Nickel Sheet & 4X4 Holder For Making Battery Packs
... weld nickel strips with a thickness of 0.2mm)..
✅【80 Levels of Adjustable Output】: Our Seesii spot welder SE-002 with 80 levels output power adjustable,it can be adjusted 1-8 and 1.1-5.4-8.0 levels according to your different needs,very fine adjustments can make the welding more precise and the spot welding effect more perfect.If you are a new learner you can adjust the delay time to delay the automatic weld time( 1-5s）, it’s very friendly for the beginner..
✅【LCD Visible Screen Display】: Our spot welder for battery is 2022 newly designed with visible colorful LCD Screen, can clearly know the remaining battery, delay time, temperature and gear level of the spot welder.The working condition of the product can be understood at a glance through the screen,make your spot welding journey easier and safer..
✅【Intelligent and Safe to Use】:The 18650 spot welder kit equipped with the upgraded chip, so that the use of electric welding is more in line with human nature. When the temperature is higher than 60℃/140°F, the spot welder will automatically stop working to avoid damage to personnel or items.Note: Af....
7x6 5x7 H6054 LED Headlights High Low Beam Sealed Headlamps DOT 110W 8400LM Compatible with Jeep Cherokee XJ Wrangler YJ Comanche MJ GMC Savana Safari Ford Replacement Black
Expand Your Field of Vision: Our 5×7 headlights come with high illumination, 5600LM/Pair on low beam, 8400LM/Pair on high beam. These headlights for XJ provide you with a brighter and wider vision. No need to worry about the deer on the road when you are driving dark nights..
Scientific Cutoff Line: With advanced LED chips, the 7×5 headlights provide 110W/Pair high output and 6000K color temperature light beam. The beam pattern is a sharp and straight cutoff line to avoid blinding oncoming drivers..
Over 50,000Hrs Lifespan: The Die-cast aluminum alloy housing dissipates more heat, keeping the 7×6 headlights at a low temp and extending the lights’ service time. The IP67-level sealed PC lens can effectively prevent dust and water from outside and protect the internal projectors from corrosion..
10 Minute Installation: Plug and Play, easy to install. The package includes 1 pair of headlights, 2 H4-HB3 wire harnesses, and installation instructions. (Note: Some Japanese cars like the 95-97 Tacoma require an H4 relay harness which is not included.).
Universal Fitment: 6×7 led headlights compatible with Jeep Wrangler YJ, Cherokee XJ, Comanche MJ.
GMC Models, Ford Models, and Tacoma Models come with 7×6 5×7 headlights. Also compatible with H6014,H6052,H6....
As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Genssi Demon Eye Halo Bi Projector Headlights Headlamp Compatible with Jeep Wrangler JL JLU 2018+ w/Factory Halogen Lamps (For Sport Sport S)
COMPATIBLE with Jeep Wrangler JL JLU ⚠️⚠️Sport or Sport S ONLY includes matching fog lamps for factory bumper.
POWERFUL DUAL PROJECTOR: Low beam 3200 Lumens / High Beam 6400 Lumens at 6000-6500K cool white.
CONTROL: Use the provided remote control or bluetooth (PRO RGB) APP found for Android/IOS app store.
HALO RING: Choose chasing colors or optical illusion patterns uniquely not found in any other headlamp.
PERFECT BEAM - The perfect cut-off line beam pattern will not blind other drivers and provide more light where you need it! [NO Adjustments, use washers if needed to adjust].
AMUNIESUN 120W Rectangle 7x6 5x7 Led Headlights 6052 6054 H5054 H6054 Led Headlight DRL Hi/Low Sealed Beam H4 Plug For GMC Ford Chevy Chevrolet Cargo Van Express Nissan
Expand Your Field of Vision: Our 5x7 headlights come with high illumination, 5600LM/Pair on low beam, 8400LM/Pair on high beam. These headlights for XJ provide you with a brighter and wider vision. No need to worry about the deer on the road when you are driving dark nights..
Scientific Cutoff Line: With advanced LED chips, the 7x5 headlights provide 110W/Pair high output and 6000K color temperature light beam. The beam pattern is a sharp and straight cutoff line to avoid blinding oncoming drivers..
Over 50,000Hrs Lifespan: The Die-cast aluminum alloy housing dissipates more heat, keeping the 7x6 headlights at a low temp and extending the lights' service time. The IP67-level sealed PC lens can effectively prevent dust and water from outside and protect the internal projectors from corrosion..
10 Minute Installation: Plug and Play, easy to install. The package includes 1 pair of headlights, 2 H4-HB3 wire harnesses, and installation instructions. (Note: Some Japanese cars like the 95-97 Tacoma require an H4 relay harness which is not included.).
Universal Fitment: 6x7 led headlights compatible with Jeep Wrangler YJ, Cherokee XJ, Comanche MJ.
GMC Models, Ford Models, and Tacoma Models come with 7x6 5x7 headlights. Also compatible with H6014,H6052,H6054 head....
Genssi LED Headlamp Headlights Conversion Kit Compatible with International Harvester Durastar 4100 4200 4300 4400 8500 8600
LED Headlight bulb kit performs 2-3X better than the factory halogen bulbs on your RIG! Please make sure your headlights look like the Photo and Please watch the video on this page or ask for link.
Low beam and High beam function with up to 8000 Lumens total.
6000K White light will allow you to see better and further.
Professional Grade: Simply the best components and LED chip on the market for long lasting performance.
don't get stuck with the generic cheap ones which will leave you stranded!.
[SEE VIDEO] Designed and fits 4000 Series 4100 4200 4200LP 4300 4300LP 4400 4400LP DuraStar line Commercial Truck.
INTERNATIONAL 8000 Series 8500 8600 Compatible with Tran Star line Commercial Truck.
Bosch GLL40-20G 40ft Green-Beam Self-Leveling Cross-Line Laser with VisiMax Technology, 360 Degree Flexible Mounting Device and Carrying Pouch
GREEN BEAM: The bright green-beam laser lines allow easier work because they are up to 2x brighter than standard red beams.
CONVENIENT: This compact 40 ft. cross-line laser design features green beams for visibility, self-leveling technology for accuracy and visible for brightness.
VISIBILITY: Cross-line functionality that includes the exclusive Bosch Visimax technology to provide maximum line laser brightness up to 40-ft in standard working conditions.
VERSATILE: The tool allows fast setup because it projects two bright lines that are precisely level and plumb for a wide array of leveling and alignment applications.
FLEXIBLE: Includes a 2mm mounting device, which clamps to multiple surfaces and provides a rotating 360° neck for quick setup and simple fine-tuning.
uxcell 20pcs DIP IC Chip Socket Adaptor Solder Type 2.54mm Pitch Dual Row 8 Flat Pin 7.6mm Row Pitch
As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
