Best Bearing Steel Hydraulic Rod End

Electric Car Jack TYAYT Electric Hydraulic Car Jack 5Ton(11023lbs) with Tire Inflator Pump and Electric Wrench, Car Floor Jack Electric Jack Lift for Car SUV Sedan Change Tires Garage

  • [ 5 IN 1 Electric Hydraulic Jack ] : The 5 in 1 electric hydraulic jack kit includes electric hydraulic jack,impact wrench，air pump,warning light and major LED light,which meets all your tire replacement needs in one time.The jack is easy to lift 5 ton car,about 2 min reach max height(lifting height range:6.1~17.7 inch).
  • [ Higher Stability and Safety ] : Heavy duty steel pressure rod, features stronger bearing capacity. Permanently lubricated DC motor can provide enough power. It will automatically stop working when it reaches the height limitation, preset pressure or overload. The self-locking device can prevent the jack from falling and keeps a steady height even with no power, ensure the safety of the car and people.
  • [ Easy Pumping ] : With a tire inflator pump installed in the electric car jack, no need to worry about the tire-broken emergency in the middle of no where. Equipped with tire pressure display, you can monitor the tire pressure while pumping.
  • [ Two-way Power Supply ] : electric hydraulic jack is powered by cigarette lighter power outlet or car battery, and has 11.5 feet power cord, long enough to go through the 4 tires without changing the power source. NOTES : Start car engine before operation. Never use the jack on slop gro....
Check Stock

TH Marine Atlas Jack Plate, 4\ Setback, Standard, Brushed

  • Self Contained Hydraulic Pump System (No Reservoir or lines to install).
  • Hydraulic actuator is made in the U.S.A..
  • Rod and Slot Lifting Design - Trouble Free Lifting Action.
  • Hi-Tech Engineered Polymer Rods - 6 Times More Abrasion Resistant than Steel Rods.
  • Made from Self Lubricating Material, no grease required.
Check Stock

Thermaltake Toughpower GF1 750W 80+ Gold SLI/ CrossFire Ready Ultra Quiet 140mm Hydraulic Bearing Smart Zero Fan Full Modular Power Supply 10 Year Warranty PS-TPD-0750FNFAGU-1

  • [80+ gold and Intel C6/C7 States ready] – deliver up to 90% efficiency, Gf1 Series optimized to work with all generations of Intel’s processors to achieve maximum energy saving.
  • [Ultra quiet 140mm hydraulic Bearing fan] – self-lubricated hydraulic Bearing PWM fan superior cooling performance and near silent operation.
  • [Smart zero fan] – auto-regulated fan speed based on power consumption for a quiet and efficient operation. Fan works only when PSU work load goes over 30%. a switch At the back of the PSU can be turned off to have the fan spun constantly.
  • [16AWG wires] – Upgraded CPU/PCI E main cables (16AWG wires) for high end enthusiasts’ Pcs.
  • [Japanese capacitors] – 100% High quality 105°C (221°F) Japanese capacitors offer the highest stability, durability, and reliability.
Check Stock

Thermaltake Toughpower GF1 650W 80+ Gold SLI/ CrossFire Ready Ultra Quiet 140mm Hydraulic Bearing Smart Zero Fan Full Modular Power Supply 10 Year Warranty PS-TPD-0650FNFAGU-1

  • 80 plus gold and Intel C6, C7 States ready: – Deliver up to 90% efficiency, Gf1 Series optimized to work with all generations of Intel’s processors to achieve maximum energy saving.
  • Ultra quiet 140mm hydraulic Bearing fan: – Self-lubricated hydraulic Bearing PWM fan superior cooling performance and near silent operation.
  • Smart zero fan: – Auto-regulated fan speed based on power consumption for a quiet and efficient operation. Fan works only when PSU work load goes over 30%. a switch at the back of the PSU can be turned off to have the fan spun constantly.
  • 16AWG wires: – Upgraded CPU, PCI E main cables (16AWG wires) for high end enthusiasts Pcs.
  • Japanese capacitors: – 100% High quality 105°C (221°F) Japanese capacitors offer the highest stability, durability, and reliability.
Check Stock

Thermaltake Toughpower GF1 850W 80+ Gold SLI/ CrossFire Ready Ultra Quiet 140mm Hydraulic Bearing Smart Zero Fan Full Modular Power Supply 10 Year Warranty PS-TPD-0850FNFAGU-1

  • [80 plus gold and Intel C6/C7 States ready] - Deliver up to 90% efficiency, Gf1 Series optimized to work with all generations of Intel's processors to achieve maximum energy saving.
  • [Ultra quiet 140mm hydraulic Bearing fans] - Self-lubricated hydraulic Bearing PWM fan superior cooling performance and near silent operation.
  • [Smart zero fan] - Auto-regulated fan speed based on power consumption for a quiet and efficient operation. Fan works only when PSU work load goes over 30%. a switch At the back of the PSU can be turned off to have the fan spun constantly.
  • [16AWG wires] - Upgraded CPU/PCI E main cables (16AWG wires) for high end enthusiasts' Pcs.
  • [Japanese capacitors] - 100% High quality 105°C (221°F) Japanese capacitors offer the highest stability, durability, and reliability.
Check Stock

Mophorn 12V/DC Hydraulic Pump 15 Quart/ 3.9 Gallon Double Acting Metal Reservoir Hydraulic Pump Unit Remotely Controlled for Dump Trailer

  • [Small & Portable] - This hydraulic cylinder is portable, small in size, but strong in load-bearing capacity, which is especially suitable for lifting and supporting work in narrow spaces..
  • [Automatically Retract] - This hydraulic ram cylinder can automatically retract to the initial height after the oil return valve of the pump is loosened, which is easy and convenient to operate..
  • [Used with Pumps] - The porta power ram should be used with hydraulic pumps. The 10T/20T can be used with CP-180 hydraulic pump (ASIN: B08QTXY2D2).
  • the 30T/50T can be used with CP-700 hydraulic pump (ASIN: B08QV222RP)..
  • [Wide Applications] - This hydraulic jack can be widely used in power, chemical, steel, bridges, shipbuilding, machinery and other industries! However, it does NOT apply to cars..
  • [One-year Warranty] - Within one year of purchase, if something goes wrong with the cylinder jack, you can replace it for free..
Check Stock

Rod End 1/4 x 1/4-28 ECF4 Female Economy Right Hand Rod End Bearing with Jam Nut Included Heim Joint Rod End Direct

  • 52100 Steel Bearing Precision Ground & Heat Treated.
  • 1/4’’ Bore x 1/4-28 Internal Right-Hand Threads.
  • Comes Complete with Jam Nut So You Have Everything You Need!.
Check Stock

Rod End 3/8 x 3/8-24 ECM6 Male Economy Right Hand Rod End Bearing with Jam Nut Included Heim Joint Rod End Direct

  • 52100 Steel Bearing Precision Ground & Heat Treated.
  • 3/8’’ Bore x 3/8-24 External Right-Hand Threads.
  • Comes Complete with Jam Nut So You Have Everything You Need!.
Check Stock

Rod End 5/16 x 5/16-24 ECF5 Female Economy Right Hand Rod End Bearing with Jam Nut Included Heim Joint Rod End Direct

  • 52100 Steel Bearing Precision Ground & Heat Treated.
  • 5/16’’ Bore x 5/16-24 Internal Right-Hand Threads.
  • Comes Complete with Jam Nut So You Have Everything You Need!.
Check Stock

Rod End 3/8 x 3/8-24 ECML6 Male Economy Left Hand Rod End Bearing with Jam Nut Included Heim Joint Rod End Direct

  • 52100 Steel Bearing Precision Ground & Heat Treated.
  • 3/8’’ Bore x 3/8-24 External Left-Hand Threads.
  • Comes Complete with Jam Nut So You Have Everything You Need!.
Check Stock