Best Bevel Gear Pitch

Slumberjack Satellite Tarp & Shelter, Kryptek Highlander - 10'x8.5' - Compact, Lightweight, Waterproof, Multi-Pitch Camping Tarp

  • Multiple pitch options create an extremely versatile shelter that sleeps two and weighs only 1 lb 10 oz.
  • Integrated hanging pocket helps organize gear and converts into stuff sack.
  • Catenary-cut ends maintain a taut set up with four additional guy-out points allow 7.5" of material to be folded under on each side, improving weather resistance and creating storage options for your rifle.
  • 70D Coated Polyester with Waterproof taped seams. Set up Dimensions: 124" x 103"/ Packed Dimensions 12" x 7.5" x 2.5".
  • 10 aluminum stakes & 8 guy-lines included * Trekking Poles not included.
  • Multiple pitch options create and extremely versatile shelter.
  • Sturdy, waterproof, 70D Polyester material.
  • Catenary-cut sides maintain a taught setup.
Check Stock

CNBTR 2PCS 45# Steel 2 Modulus 20 Teeth 14mm Hole Dia 90 Degrees Tapered Bevel Gear Wheel

  • Made of high quality 45# steel ,high wear-resistance,longtime use..
  • Lower contact ratio between gears, higher load capacity..
  • It only can fit for 2module gear,20 teeth,90 degrees,Hole Dia 14mm..
  • Suitable for used in agricultural equipment, textile machinery, printing machinery, Mechanical transmission, etc..
  • Note:1 to 1 bevel gear (only 1 to 1 match, can not match with other modules and other number of teeth).
Check Stock

CNBTR Tapered Bevel Pinion Gear 12mm Hole Diameter 45# Steel 1.5 Module 16 Teeth Pack of 2

  • Made of 45# steel with high wear-resistance,strong and durable..
  • Lower contact ratio between gears, higher load capacity..
  • It only can fit for 1.5 module gear,16 teeth,90 degrees,12mm Hole Diameter..
  • Suitable for used in agricultural equipment, textile machinery, printing machinery, Mechanical transmission, etc..
  • Note:1 to 1 bevel gear (only 1 to 1 match, can not match with other modules and other number of teeth).
Check Stock

CMT 213.040.10 Industrial General Purpose Saw Blade, 10-Inch x 40 Teeth 20° ATB Grind with 5/8-Inch Bore, PTFE Coating

  • For rip and crosscuts with exceptional finish. Excellent rip and crosscut on wood. Good on plywood..
  • To be used on adial arm saws, miter saws, table and special saws..
  • 0.126 kerf thickness, 0.098 plate thickness, 18° hook angle, 20° Alternate Top Bevel Grind..
  • Micrograin carbide teeth to last longer and deliver smooth cuts..
  • Non-Stick PTFE Coating keeps blade running cool, reduces pitch buildup, protects against corrosion..
Check Stock

Mtanlo .325-7 Clutch Drum Rim Sprocket Bearing Kit for Stihl MS180 018 017 MS170 MS250 MS230 MS210 021 023 025 MS170C MS180C Chainsaw

  • Clutch Drum Oiler Worm Gear Kit Fit Stihl MS170 MS180 MS170C MS180C MS210 MS230 MS250 017 018 021 023 025 Chainsaw.
  • You'll Get: 1 x Clutch Drum Bell, 1 x Rim Sprocket, 1 x Worm Gear Drive, 1 x Needle Bearing, 1 x Clutch Washer, 1 x E-clip..
  • Kind Tip: 325-7 Sprocket convert kit, which will fit upper models with 0.325 chain guide bar..
  • Please freely contact me if you want to replace rim to 3/8 pitch, i will do for you..
Check Stock

Jigging Reel Saltwater Slow Pitch Jigging Reels 6.3:1 Right Hand BalanZze 9BB+2RB 55lbs Drag High Speed Jigging Reels Conventional Reel Big Game Heavy Duty

  • Anti-flip handle - The double drag ratchet system prevents the handle from reversing. Low noise, strong strength, fine engagement, even and smooth line winding, tested for reliability and quality, used by professionals worldwide for slow pitch jigging, conventional, deep sea, lever drag, boat fishing, offshore fishing, and other big games.
  • High-quality bear - Imported from Japan shielded stainless steel 9BB+2RB bearing. Smooth rotation, and not easy to get rust. Stainless steel easy-to-cut helical gear with a high gear ratio of 6.3:1, the helical tooth is high strength and low noise, the max drag could be up to 66lbs.
  • Material of reels - The mainframe, spool, and side cover of this jigging reel are all made of high strength A6061-T6 aluminium alloy to ensure that the product can achieve a smooth surface and super-strength effect. This slow pitch jigging reel gear disc /gear /spindle is by stainless steel precision machining. Other spare parts are also stainless steel material, durable and not easy to wear.
  • Design of All-Metal bending rocker arm Is not easy to damage and deform. Well connected with the shaft, makes the reels more strong, guarantees the ability of haul line. More comfortable grip, storage is more convenient.
Check Stock

DAPENGNIAO for Das87 6 Pcs M0.2 Brass 10T-50T Spur Gear Accessories

  • 50 tooth hardened steel Mod 1 (1.0 metric pitch) spur gear for the Traxxas E Revo2, X-Maxx 6S and 8S, Maxx 4S and XO-1.
  • Do NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without the pins. Refer to the Traxxas manual for instructions (ref. pg.22 - Adjusting Gear Mesh).
  • With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them..
Check Stock

Boston Gear L5092 Rack Gear, 14.5 Degree Pressure Angle, 20 Pitch, 2.0 feet long, Steel

  • 50 tooth hardened steel Mod 1 (1.0 metric pitch) spur gear for the Traxxas E Revo2, X-Maxx 6S and 8S, Maxx 4S and XO-1.
  • Do NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without the pins. Refer to the Traxxas manual for instructions (ref. pg.22 - Adjusting Gear Mesh).
  • With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them..
Check Stock

Champion Sports Youth Anchor Style Pitcher's Plate

  • PERFECT FOR KIDS: Ideal for younger players learning how to pitch, the Champion Sports Youth Anchor Pitchers Plate provides each pitcher just the right foundation and tactile feel to sharpen skills.
  • HEAVY DUTY: Our gear is built to handle repeated use through practices, training, and games, as well as inclement weather, rain, and muddy conditions.
  • resists wear from cleats and spiked footwear.
  • PRACTICE OR GAMES: Include this valuable baseball equipment on your team's baseball mound so that they're training with the same rubber plates they'll use in their scrimmages and official games.
  • SECURE ANCHOR: Includes sturdy anchor to attach the strip to the mound so you can keep your plate locked down and ready to go pitch after pitch, strike after strike, game after game.
  • MULTI USE: The quality and long wearing durability make this strip a must have diamond staple for youth baseball and softball recreational leagues, schools, parks, and baseball complexes everywhere.
Check Stock

Big Agnes Bunk House Camping Tent, 8 Person

  • ... two vestibules. Two large, smooth-opening doors featuring windows with two closure options: mesh only for ventilation or zip up the polyester layer for complete closure. Storm flaps on the vestibule base zippers add extra fortification from the elements..
  • Shelter Mode – Pitch it as a covered shelter using just the fly, poles and included webbing harness (without the tent body) to create a large, open shelter that is an ideal shady spot for everyone to hang out under during hot days. Can also be set up using footprint that is sold separately in place of webbing harness..
  • Full Featured – The Bunk house 8 has two sewn in corner bin pockets for stashing all sorts of sundries. Also included are 16 interior mesh pockets. Gear loft loops are included in the tent and fit Square, Trapezoid, Large Trapezoid and Triangle gear lofts– sold separately. The extra-large welcome mat on the front door keeps your dirty shoes out of your tent..
  • Ready To Pitch with pre-cut guy lines and tensioners attached to fly. Reflective guy lines and webbing on tent corners make your tent easily visible at night. Color-coded webbing and buckles make....
Check Stock