Best Big Block Intake Manifold Gasket

Universal Car Oil Catch Can Kit Polish Baffled Automotive Reservoir Tank 300ml with Breather Aluminum Compact Dual Cylinder

  • ★ MAINTAIN EXCELLENT ENGINE PERFORMANCE - EIGIIS Oil Catch Can Kit prevents sludge from accumulating in the valve and intake manifold, keeping the engine clean. Increase horsepower and maintain engine life by removing oil from the PCV valve from the intake manifold..
  • ★ EASY TO CLEAN - EIGIIS Oil Catch Can Kit is fully Tig Welded and Thread Come with O-ring Gasket to Prevents oil leakage. You also don't need dismount it, just need to unscrew the bottom part of the reservoir, then you can clean it down easily..
  • ★ SAVE FUEL CONSUMPTION - EIGIIS Oil Catch Can Kit can effectively reduce the fuel consumption of high-speed engines and turbine engines. There is also a washable stainless steel screw on the filter/venting hole with a hose clamp to prevent loosening..
  • ★ HIGH QUALITY MATERIAL - EIGIIS Oil Catch Can Kit is made of high quality 0046 aluminum for added strength and durability. The capacity is 300ml,enough for daily use.Universal for most car such as Subaru,2014 Santa Fe and 2013 Sonata,Mazda MX-5 etc..
  • ★ ATTENTION- 100% product quality assurance. Please feel free t....
Check Stock

Gen III LS Head Gasket Kit for GM Chevy LS1 LS6 LQ4 LQ9/4.8L 5.3L 5.7L 6.0L 1997-2007 Cylinder Engine Block Valley Cover Gasket 12589226 12612350 12558178

  • ...)Front Main Crank Seal#12585673/(2)Knock Sensor Grommet# 12558177/(4)Water Block Off Gaskets#12551933/(2)LS Water Pump Gasket #12630223/(1)Front Cover Gasket#12633904/(1)Rear Main Seal Gasket#12639249/(1)Oil Pan Gasket#12612350/(2)Cylinder Head Gasket#12589226/(1)Engine Block Valley Cover Gasket#12558178/(1)Exhaust Manifold Gasket#12617944/(1)Valve Cover Gasket#12637683.
Check Stock

HOLLEY MODULAR LO-RAM EFI MANIFOLD KIT,TOP-FEED PLENUM,BLACK FINISH,COMPATIBLE WITH GM LS1,LS2 & LS6 GEN III & IV ENGINES

  • Brand New Holley Modular Lo-Ram EFI Manifold Kit, Top-Feed Plenum, Black Finish, Compatible with LS1, LS2 & LS 6 Gen III & IV Engines (Part #300-620BK).
  • The 300-620 top-feed plenum entry configuration is designed to allow the included Hi-Ram 105mm plenum top to be fitted to a low-profile base intake manifold. The short runner, low-profile base intake manifold intended for forced induction applications was conceived to package with an air to water plenum mounted intercooler with a shorter overall height than possible with other existing intake manifolds..
  • The Holley LS1/2/6 Lo-Ram intake manifold kits are designed for GM LS Gen III & IV engines equipped with GM LS1/2/6 (cathedral port) cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The fuel rail kits come with 2 sets of brackets: A set for long (usually standard length) fuel injectors & set for short (such as Pico, or LS7) fuel injectors..
  • NOTE: Total Height: Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top - 9.07" (without intercooler installed) | Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top, w/ intercooler installed - 9.07" + intercooler thickness.
  • Specs: Brand: Holley EFI | Color: Black | Construction: Cast | Emission Code: 3 ....
Check Stock

Carburetor Carb Intake Manifold Boot Adapter for Yamaha Wolverine 350 YFM350 (1996-2005) & Big Bear 350 YFM350 (1999) 4x4 ATV Quad 4KB-14901-10-00, 4KB-14901-22-00, 4KB-13586-01-00

  • [FITMENT]-- New intake manifold for 1996-2005 Yamaha Wolverine 350 YFM350 carburetor..
  • [FITMENT]-- Carb intake manifold boot fit for 1999 Yamaha Big Bear 350 YFM350 4x4 ATV.
  • [FITMENT]-- Fit for models: 4KB-14901-10-00, 4KB-14901-22-00, 4KB-13586-01-00..
  • [NOTICE]-- Installation side diameter: 39mm/ 1.53”.
  • Please check model and year to confirm suitability before purchase..
  • [WARRANTY]✉: 90 days. Please contact us for any product problem or purchasing guidance..
Check Stock

1 PC SHLPDFM Single Plane Intake Manifold Cast Satin Finish Aluminum Intake Manifold Compatible with 1957-1995 SBC Small Block Chevy 350 400 RPM 3500-8000

  • ★Compatible with 1957-95 Small Block Chevy 350 400 Manifold..
  • ★Single plane design intended for serious street and race applications.
  • ★Made of high quality Cast Aluminum material,maximum durability,Deformation resistance, high strength, good wear resistance, high hardness, long life..
Check Stock

JRL 32mm-40mm Black Offset Intake Manifold and Gasket For 49cc 66cc 80cc Motorized Bike Motorised Bicycle (Black)

  • Fitment:49cc 50cc 60cc 66cc 80cc Regular Motorised Bicycle Carburetor.
  • Package Include:1 x Intake Manifold 1 x Gasket.
Check Stock

JRL 32mm Offset Intake Manifold & Gasket for Carb 49 66 80cc Motorized Bicycle Steel

  • Fits: 49cc 66cc 80cc Motorised Bicycle Carburetor.
  • Package Include:1*Carb Offset Intake Manifold(With Gasket).
  • NOTE:Please check for the details and make sure this is the right one you need..
  • This is an aftermarket parts. For more compatibility and other questions, feel free to contact us by email..
Check Stock

A-Premium Dual Plane Air Gap Intake Manifold Compatible with Chevy Small Block, fits V8 4.3L 262 265, 4.4L 267, 4.6L 283, 4.9L 302, 5.0L 305 307, 5.4L 327, 5.7L 350, 6.6L 400, Replace# 52026, 82026

  • ③ Carburetor Mounting: 4-barrel square bore.
  • ④ Cylinder Head Style: Stock configuration.
  • [Benefits]: It is made of superior-quality materials with top-quality performance and reliable construction, the smooth inner wall of the manifold makes it super air-intake capacity, riving more smoothly and safely..
  • [Customer Support]: 1 Year Unlimited-mileage Quality Guarantee.
  • With being sturdy and brand-new, this dual plane intake manifold is the ideal replacement. Please get in touch with us at any time if the product has any quality issues, such as damage or isn't appropriate for your automobile. › See more product details.
Check Stock

Tektall Intake manifold adapter Replace for TBI 5.7 350 adapts a small block 1.75" bore throttle body injection 1" thick Fits Pattern 4-barrel Manifold Alloy Durable

  • 【Fitment】 Tektall Intake manifold adapter Replace for TBI 5.7 350..
  • 【Good Quality】 Made from a super durable and heat resistant composite material. This part is far better that a 1/2" or less steel or aluminum spacer.A full 1" thick . Bores match the bores of the throttle body and taper to match a 4 barrel intake without hurting airflow which is a proven way to increase TQ and airflow.Mounting holes to the manifold are slotted for tuning adjustments..
  • 【High performance】 Tektall Intake manifold adapter's bores are tapered in to adapt the wider TBI unit to the narrow Holley edelbrock pattern 4bl manifold. This is very important many adapters don't have this feature. This can cause poor performance that is blamed on the computer, injectors ect. when it is really the adapter..
  • 【Package includes】 1 X Intake manifold adapter, 1 X Gaskets, 1 X Mounting stud kit （Studs, nuts, and washers.） , 1 X Manual..
  • 【NOTE】 Please confirm the item if it matches your machine before you purchase. All Tektall products will undergo strict inspections and strong packaging before shipment.Please rest assured to purchase.Thanks..
Check Stock

ICT Billet LS3 Intake Manifold Seal Oring Gasket Set 6.2L LS L99 Rectangle Port Gen IV Compatible with Chevy Camaro (2010-2015) Corvette (2008-2013) Caprice SS G8 551278

  • Replace Your Leaking or Worn out Intake Manifold Gaskets with These new OE Spec Intake Manifold Gaskets.
  • Manufactured with High Quality Silicon to Ensure an Air Tight Seal.
  • Molded to Factory Dimensions for a Perfect fit.
  • Compatible with 2008 and up LS3 Rectangle Port Intake Manifolds.
Check Stock