Best Bipolar Stepper Motor Driver

Saiper Flexible Couplings 5mm to 8mm (5pcs) Aluminum Alloy Joint Connector Compatible with NEMA 17 Stepper Motors, RepRap 3D Printer or CNC Machine, 3D Printer Accessories

  • Fully assembled & tested, no soldering required, Can be extended to control other accessories..
  • It has Cartesian robots and requirements of the extruder, Heated bed control with additional 11A fuse. Fits up to 5 stepper driver board..
  • Three field effect transistors, three heater / fan output ports, three thermistor circuits.A number of expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack..
  • The fifth stepper motor output port can be customized as a Z-axis motor or a second extruder.Pololu board foot socket, can be easily replaced or removed..
  • The modular design includes plug in stepper drivers and extruder control electronics on an MEGA shield for easy service, part replacement, upgrade-ability and expansion..
Check Stock

SainSmart CNC 4-Axis Kit with TB6600 Driver ST4045 & Nema23 270oz-in Stepper Motor USB Controller Card Nema23 Stepper Motor and 36V Power Supply

  • Comes with CNC USB port interface breakout board.
  • 4.5A ST-4045 stepper motor driver, ensure the stable operation of equipment.
  • the range of AC input voltage is changed by the switch.
  • 57HS76 stepper motor, powerful and stable to work..
Check Stock

2-Pack CR10 Z axis T8 Anti Backlash Spring Loaded Nut Elimination Gap Brass Nuts for Upgrade Ender 3 Ender 3s Ender 3 Pro V2 CR-10 Tornado 3D Printer 8mm Acme Threaded Rod (Nuts)

  • 【Fine Design】: This rail and linear block are small and light, especially suitable for small teams. The main body is made of metal, and the slider is plastic, the tool is simple and easy to use, strong and durable..
  • 【Technical Data】: Drive Voltage: DC 5-12V/ max 800mA (the higher the voltage, the greater the force and the greater the heat).
  • 【Note That】: This stepping motor direct power is not rotating, it need to stepper motor driver board. Search "B09BTWQPTB" to purchase it. Wiring method: Blue A +, Black A-, Red B +, Yellow B- ..
  • 【Application】: Stepper motor guide linear slide table can be used for DIY small slider projects, measuring equipment, laser printer, etc..
  • 【Guarantee】: Our stepper motor are have 120 days warranty, if you have any question about this product, please feel free to contact us, we will try our best to help you solve your problem..
Check Stock

AOICRIE 5Pcs L298N Dual H Bridge Stepper Motor Driver Board For Arduino (5pcs)

  • 【Package Included】- 2pcs L298N Motor Driver Controller Board Modules..
  • 【Item Condition】- Drive voltage 5V-35V, high working power to 46V. Large current can reach 3A MAX and continue current is 2A. Power to 25w.(NOTE: To avoid damage, please use an external 5V logic supply when using more than 12V driving voltage.).
  • 【High Quality】- Use L298N as the main driving chip, so the module has such features as strong driving ability, strong anti-interference and low calorific value. And it also use large-capacity filter capacitor and diode with freewheeling protection function, thereby improve the reliability of module..
  • 【High Efficiency】- Dual-channel H-bridge design, can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors..
  • 【Easy of Use】- No assembly required. This L298N board comes ready to go. Just wire up motors and power, this thing will work wonders..
Check Stock

42 Motor 1.5A 17HS4401S with TB6600 Stepper Motor Driver NEMA17 23 for CNC and 3D Printer

  • ★ Latest CNC Shield Expansion Board V3.0 ★-CNC shield board is updated version 3.0, which is suitable for CH340G Shield 3.0 version compatible....
  • ★ Professional 3D printer CNC Kit ★ This is a professional 3d printer DIY kit with multiple types of modules or components you need. It is a great....
  • ★ Premium Quality ★ Each part of this Logrunner 3d printer conk kit was made of premium material. These components can be used in a wide range of....
  • ★ DRV8825 Stepper Motor Driver with Heat Sinks ★ High quality stepper motor drive with 4 Aluminum Cooler, running within 2.5A current (Maximum),....
  • ★ Good after-sales service. We'll respond within 24 hours for any questions..
Check Stock

KOOMEDA Mini Milling Machine Worktable, Compound Drilling Slide Table, Multifunction Worktable, Drill Vise Fixture Adjustment Worktable for Bench Drill

  • ♞【User Manual&GRBL Software】Our parcel include the CD,it include the installation instructions,user manual and GRBL software.
  • ♞【CNC 1310】 Working area:126mm*88mm*38mm / Machine Dimension: 281mm*281mm*287.5mm /Control Software: Grblcontrol / Lite.fire/Benbox. / Power Supply: DC24V adapter (input: 110VAC-240VAC) / Spindle Motor: 775 spindle motor (12-36V), 24V 8000r/min / Spindle Chuck: ER11 / Stepper Motor: 2-Phase 4-Wire Stepper Motors (1.3A 0.25N.m).
  • ♞【Wide Application】Suitable for carve/engrave plastic, wood, acrylic, pvc, pcb,bamboo,MDF and silimar materials engraving/cutting,as well as copper, aluminum, and other kinds of soft metal materials..
  • ♞【Supported System】Windows XP / Win 7 / Win 8 / Win 10..
  • ♞【Professional Team】Please let us know if you need any help about the machine.AND please let us know if you fail to install the CH340 driver on Windows 10..
Check Stock

MEGA 2560 Starter Kit Ultra (100% Arduino IDE Compatible) w/ Battery Holder, Sensors, Modules, Resistor kit and Components (no Supply)

  • ...RC-522 RFID Module with white RFID Card and RFID Keychain -High-precision RTC Real-Time Clock Module DS3231 and EEPROM AT24C32 -PIR Presence Sensor HC-SR501 -Distance measurement module HCSR04 -Sound sensor detector module with programmable threshold -LM35 temperature sensor -Tilt detector module -Servo SG90 motor -Stepper motor (5V) -Motor driver module for stepper motor ULN2003.
  • 5V Active Buzzer -5V Passive Buzzer -LCD 1602 16 characters * 2 lines -LED Display Driver MAX7219 -LED Matrix Display of 8*8 -7 Segments Display 1 digit -7 Segments Display 4 digits -Simple Relay Module - Infrared Remote Control 38kHz - 38kHz Infrared decoder receiver (type 1838) - Infrared phototransistor (Flame sensor) - Infrared LED - Light sensor (Photoresistor).
  • -10 * LEDs 5mm Diffused RED -10 * LEDs 5mm Diffused GREEN -10 * LEDs 5mm Diffused YELLOW -5 * LEDs 5mm Ultrabright WHITE diffused -3 * LEDs 5mm Red / Green / Blue Diffused RGB -Shift Register (Series to Parallel IC) 74HC595 - NPN Transistor BC547 - PNP Transistor BC557 - Adjustable Knob Resistor 1kOhm (Potentiometer) - Adjustable Knob Resistor 10kOhm (Potentiometer).
  • - Resistor Pack 1/4W 1% accuracy, with 10pz of each value: 100, 220, 330, 470, 1K, 2K2, 4k7, 10K, 22K, 47K, 100K, 220K, 1M - 40-pin header 2.54 mm -4....
Check Stock

6 Pack Mini L298N DC Motor Driver, MELIFE MX1508 Mini Dual Channel 1.5A 1.5A 2 Way PWM Speed Controller Dual H-Bridge Replace Stepper

  • Motor drive module is ideal for use in battery-powered smart car, toy cars, robots..
  • Dual H-bridge motor driver, can drive two DC motors or a 4-wire two-phase stepper motor..
  • Supply voltage 2V -- 10V, can drive two DC motors or a 4-wire 2-phase stepper motors ,can achieve forward rotation or reverse rotation, it is possible to adjust the rotation speed..
  • Dual 1.5A * 2, the peak current to be 2.5A, built-in thermal protection circuit, do not be afraid motor stall burned, automatic recovery after the temperature dropped..
  • Use of imported original chip, built-in low on-resistance MOS switch, minimal heat, no heat sink, small size, low power consumption, is ideal for battery powered..
Check Stock

DC 5V-9V 12V 2 Phase 4 Wire Stepper Motor Linear Rail 90mm Stroke Lead Screw Linear Stage Actuator with Nut Slider Step Angle 18 Degree for DIY Laser Engraving Machine

  • 【All metal】 The linear screw adopts an all-metal structure, with fine workmanship, stable performance and high work efficiency, and is an essential part of linear motion..
  • 【Size】 Screw length: about 45mm/1.8inch, screw diameter: about 3mm/0.1inch, pitch: about 0.5mm/0.02in (moving in one step is 0.025mm, if smaller, you can use a subdivision driver)..
  • 【2-phase 4-wire stepper motor】 With a miniature 2-phase 4-wire stepping motor, the slider stroke is about 34 mm/1.3 inches, and the motor diameter is about 20 mm/0.8 inches. The driving voltage of the motor is 5-9V/200-600mA (the higher the voltage, the greater the force Larger, the greater the calorific value)..
  • 【Easy to use】 The micro stepping motor slide table can drive the accurate diagonal to move the metal slide up and down..
  • 【Application】 Stepper motor guide linear slide table can be used for DIY small slider/project/measurement equipment/laser printer, etc..
Check Stock

Happybuy Linear Rail 3 Ballscrew RM1605-350mm 650mm 1050mm Linear Rail Support 12 CNC Kit Linear Shaft Optical Axis

  • ★ Latest CNC Shield Expansion Board V3.0 ★-CNC shield board is updated version 3.0, which is suitable for CH340G Shield 3.0 version compatible....
  • ★ Professional 3D printer CNC Kit ★ This is a professional 3d printer DIY kit with multiple types of modules or components you need. It is a great....
  • ★ Premium Quality ★ Each part of this Logrunner 3d printer conk kit was made of premium material. These components can be used in a wide range of....
  • ★ DRV8825 Stepper Motor Driver with Heat Sinks ★ High quality stepper motor drive with 4 Aluminum Cooler, running within 2.5A current (Maximum),....
  • ★ Good after-sales service. We'll respond within 24 hours for any questions..
Check Stock