DAFEIKE Caulk Nozzle Flat Mouth Bent Caulking Tips Sausage Caulking Gun Tips Cone Trowel Nozzles, Multi-size, Pack of 12 (10 Tips and 2 Bases)
[PERFECT DESIGN]. The bent caulking tips facilitates users to hold and caulk. Nozzle flat mouth acts as a spreader trowel. So, these caulking gun tips are not only extender but also finisher. Work easy, time saved..
[HIGH COMPATIBILITY]. These caulk tips are fit for most caulking guns. These caulk gun extension nozzles can be used for dispensing both cartridges (tubes) and sausage of sealant silicone caulk through screw..
[WIDE APPLICATION]. These replacement caulk nozzle extender are widely applicable. The bulk caulking gun nozzle can apply to baseboard caulking, doors and window sealing, bathroom caulk and plumbers caulk etc..
[REUSABLE]. The sausage tube caulk gun nozzle is environmentally friendly and economical. The bulk caulking gun nozzle is made of durable thick plastic and can be used repeatedly as long as cleaned afterwards..
[ENOUGH REPLACEMENT]. The package includes ten cone nozzles for caulking gun (two pcs each size) and two caulk gun nozzle bases. In total there are five-size radius, fit for most different work objects..
A versatile, heavy duty buoy made by Polyform and manufactured in the U.S.A.
A-1 buoys measure 11 in. diameter by 15 in. tall with 1 in. ropehold eye diameter.
Commonly used as a marker buoy, anchor buoy, or mooring buoy, and provides enhanced protection when used as a boat fender.
Suggested for boats approximately 20-30 ft. long, when used as a fender.
This product ships deflated inflate using 1) a Polyform Inflation Adapter with any standard tire pump connection 2) a tapered nozzle blow gun or 3) a Polyform specialty hand pump.
A versatile heavy duty boat fender made by Polyform and manufactured in the USA.
Recommended for boats between 20 and 30 ft. in length.
Designed for heavy use in challenging conditions, the F Series is Polyform's premier boat fender.
F-2 boat fenders measure 8.2 in. diameter by 25 in. tall with 0.9 in. ropehold eye diameter.
This product ships deflated. Inflate using 1) a tapered nozzle blow gun, 2) a Polyform Inflation Adapter with any standard tire pump connection or 3) a Polyform specialty hand pump.
Heat Gun Nozzles Kit, SEEKONE Hot Air Gun Attachments 7 Pieces Stainless Steel Accessories Air Outlet Diameter 35mm / 1.377inch
★【Conventional Size, Suitable for 35MM daimeter heat gun nozzle】SEEKONE heat gun nozzles diameter is 1.377inch/35mm, can be used for SEEKONE heat gun. It's better to measure the size before purchasing. When installing the nozzle, you need to rotate it, not directly insert it..
★【High Quality Material】All the heat gun attachments made by high quality stainless steel, suitable for lone-time use..
★【Versatile Accessories】5 Nozzles, paint scraper & putty knife extend the heat gun's utility. A range of nozzles and scrapers performs wide applications flexible..
★【Wide Aapplication】5 Differents heat gun nozzles used for controlling the flow of air and focusing heat to the desired area, best for shrink wrapping, crafting, embossing heating, painting, roofing, wire stripping, phone / auto glass repair, tint soldering / desoldering, plastic welding, PVC pipe bending, seized bolts & nuts loosening, replacing tile, waxing skis and snowboards, soften plastics as well as drying and thawing purpose. The scraper and putty knife main use for remove the paint..
Premium gas nozzles (2-pk and 5-pk) for MIG welding gun in Miller Millermatic/MIGmatic and Hobart welders..
Gas nozzle 169715 (1/2" orifice, flush tip) for use with MIG welding gun M-10/M-15 (M-100/M-150) in Millermatic 135, 140, 175, 180, 210, 211, Passport and Passport Plus. Also replacement for gas nozzle 770-404 for some Hobart MIG welding guns such as H-9/H-10..
Gas nozzle 16972X and 200258 for use with MIG welding gun 150A - 400A M-25/M-40 series in Millermatic welders. 1/2" and 5/8" orifice.
tip-nozzle relationship recessed/flush/stick-out as per illustrated nozzle length for various part numbers..
Refer to your MIG welding gun user manual for selection of correct gas nozzle. Package of 2-pk and 5-pk. Volume discount available. Buy More Save More!.
U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Zhengmy 12 Pieces Airless Paint Sprayer Gun with Nozzle Guard 5 Spray Tips and 5 Airless Paint Spray Gun Filter for Airless Spraying Machine Paint Accessories (211,313,415,517,623)
Package Quantity: the airless paint sprayer gun kit comes in 12 pieces, including an airless sprayer gun, a nozzle tip guard protector, 5 reversible spray tips, and 5 airless spray gun mesh filters, sufficient for your use and replacement in daily life.
Good Spraying Effect: the filter installed in the paint sprayer gun could filter the paint and reduce the clogging of the nozzle.
The spray range of the nozzle varies according to the size of the aperture, which can be set according to your project needs to create a clear and fine spraying effect.
Available for Long Term Use: airless paint sprayer gun is made of quality steel and hard metal materials, 1/4 inch adapter, reversible airless nozzle made of 304 stainless steel handle and tungsten carbide nozzle.
Nozzle tip guard is made of metal and plastic, sturdy and durable.
Easy to Install: first insert the tip seal into the nozzle, then put the nozzle into the protective base, and finally rotate and secure.
Once assembled, the airless paint sprayer can be rotated and installed, ready for your spraying project.
A versatile, heavy duty buoy made by Polyform and manufactured in the U.S.A.
A-4 buoys measure 20.5 in. diameter by 27 in. tall with 1.125 in. ropehold eye diameter.
Commonly used as a marker buoy, anchor buoy, or mooring buoy, and provides enhanced protection when used as a boat fender.
Suggested for boats approximately 50-60 ft. long, when used as a fender.
This product ships deflated inflate using 1) a Polyform Inflation Adapter with any standard tire pump connection 2) a tapered nozzle blow gun or 3) a Polyform specialty hand pump.
Garden Hose Nozzle, Heavy Duty Metal Spray Gun, Brass Nozzle, Rotaing Water Adjustmen Nozzle- High Pressure Sprayer for Watering,Plants,Car Wash and Pets Shower
➤【HOSE NOZZLE GUN BODY CRAFT】: The surface of the gun bodied are added with a sanding process based on the normal electroplating process, which avoids the scratches on the surface of the garden hose nozzle to a large extent and makes your garden hose nozzle look more marvellous .What’s more, we would give you a foam pot which can be used to match the garden hose nozzle for more use..
➤【ADVANCED MATERIAL】：Made of 100% metal construction built and brass head, durable and powerful. Full soil brass nozzle & zinc alloy gun body. Gun is much stronger than plastic ones and built to last. Garden hose nozzle with 3/4 quick connector and foam pot, perfect for Watering Your Garden, Lawn, Grass, and Flower Beds. It’s also great for Washing Your Car, Dogs, and Pets..
➤【9 FUNCTIONS SPRAY NOZZLE 】: Garden hose nozzle is extra heavy duty made from a 100% metal body and trigger. This spay gun also has a high quality anodized finish to prevent rust, corrosion, and wear. A shock resistant rubberized bezel dial protects the sprayer from accidental drops. The sprayer boasts non-slip and comfortable grip and rotating bezel for choosing 9 spray patterns: Full, Flat, Shower, Cone, Jet, Soaker, Angle, Mist and Center..
2 Pieces Lever Style Air Blow Gun with Rubber and Safety Tip Nozzles for Home Garage Shop Industrial
Durable to use: the lever style blow gun is made of quality aluminum alloy material, which has strong metal structure and firm to use, delicate work....
Provide more safety: the dust bow gun features a scratch-resistant rubber tip, allow you to use it safely, can also be helpful to avoid scratching....
Detachable design: the dust blowing gun is detachable, and the rubber and safe tip can be removed according to actual needs, easy for you to clean and....
Easy to operate: just press the valve stem to eject gas, gently release the thumb valve control to close the blow gun, comfortable rubber thumb lever....
Multi-functional blow gun: the lever blow gun for garage is applied to remove dust, powder, crumbs, water, debris and dry fluid, and can easily clean....
Eastwood 5 Pack 5-20 in. X 10 1/2 in. Window Liners Replacement Abrasive Media Blast Cabinet
Our Famous C-35 Series Power Gun with Long-Lasting 1/4" Tungsten Carbide Nozzle! Skat Blast Pro C-35-C Foot-Pedal Power Gun is "High-Velocity" and is designed especially for siphon blasting in all foot-pedal-operated Skat Blast Cabinets..
Includes our famous C-35 Series Power Gun with a durable medium 1/4" Tungsten Carbide Nozzle installed in the gun for long life. Carbide nozzle outlasts 30 ceramic nozzles. Plus, ergonomic handle for operator comfort..
Skat Blast Gun power head is manufactured from Zamac, a harder material than aluminum for longer life.
and has a case-hardened insert for better fit against back side of nozzle. If it's time to replace your foot-pedal gun in your cabinet, this is the one to buy!.
Has 1/4" standard female pipe thread air inlet at bottom of handle. Your hose from pickup tube slips on power head. Accepts 5/8" ID siphon hose. Complete with 1/4" medium Tungsten Carbide Nozzle and medium air jet installed in gun, 2 medium air jets, 1 air jet gasket, and allen wrench..
Max 125 psi. Requires 10-15 cfm, 5-7 HP. 7-3/4" wide, 6-1/2" high, 1" deep. Made in USA. Patent No. D760,571. FOR SIPHON BLASTING ONLY..
