FEETECH 35KG Servo Motor 7.4V High Voltage Waterproof High Torque RC Servo Full Metal Gear Digital Servo, Aluminium Case, Control Angle 180° for 1/8 1/10 RC Cars, TRAXXS x4, Baja, RC4WD, GTR and More
HIGH QUALITY SERVO: FT5330M servo motor is composed of a sturdy PA aluminum middle shell, a strong steel metal gear, and a hard iron shaft, provide higher stability and provide longer service life..
GREAT COMPATIBLE MOTOR: The servo motor system is controlled by pulse, compatible with 1/8 and 1/10 scale RC robots, trucks, off-road vehicles, robotic arms, and any application that uses a standard servo system..
SERVO PROTECTION MECHANISM: The steering gear has IP54 waterproof performance and ball bearings.The output torque exceeds the overload torque, lasts 8S, or the temperature over 70 ℃, the steering gear will automatically stop the output torque. The overload torque can be modified..
HIGH ROTATION SPEED SERVO: A high-torque servo, the rotation angle is 180 degrees (at 500→2500μsec), when the power is stopped, it can rotate 360 degrees. Dead width ≤ 4 μsec. Durable and reliable..
STRONG STALL TORGUE MOTOR: The operating voltage range is 4V-8.4V, the stall torgue is (6V) 400.65oz/in(28.8kg/cm), (7.4V) 493.86oz/in(35.5kg/cm). The servo size is 55X20x43mm..
6 Channel Digital Servo Tester with Over-Current Protection
Use high-precision six potentiometers, which can control the corresponding six servos simultaneously.
The 0th, 1st, 2nd and 3rd interface have over-current protection to avoid burning out servo due to over-current.
The voltage that the controller require should correspond to the voltage required by a servo that you controlled.
There is a small button under each knob of controller, press it, the servo will return to the center of the state, the knob can not control the servo rotation.
then press it, remove the center of the state, the knob can continue to control the servo rotation.
KEYESTUDIO Mega Plus 2560 R3 Board for Arduino with Type-C USB Cable, 1.5A Output, More Powerful MCU Contoller Board
This Mega Plus board can work like the Arduino Mega R3 2560 but it is more powerful and has more pins.
The USB-to-Serial chip of this board is stable and compatible CP2102.
Up to 5V, 1.5A output, can drive drive high-current devices like servo and motor.
Additional SPI communication interface, IIC communication interface, Serial communication interface(4 channel).
Serial2 (D17 is RX2, D16 equals to TX2), Serial3 (D15 is RX3, D14 is TX3), D0 and D1 are connected to MCU.
The yellow text on black board makes identifying pinsets a breeze. FCC and CE is available.
How to use: Search for "keyestudio wiki KS0499" in Google Chrome to get the wiki online tutorial for this product. Technical supports are available at any time!.
AGFRC 55KG Digital-Steering-Servo High-Torque Programmable - Full Metal Gear Brushless Servo for 1/8 1/10 RC Models, Control Angle 180° (A86BHM)
【UPGRADED & PROGAMMABLE】This upgrade high torque servo is programmable by the AGF-SPV2/V3 servo programmer (not Include) to change the torque, speed, angle, etc..
【HIGH PRECISION & MONSTER TORQUE】Stable, low noise, dust-proof, advanced linearity and accuracy. The maximum torque of this steering servo is up to 55kg/cm (764oz-in) @8.4V and speed up to 0.110sec/60°@8.4V. Size: 40*20*41.5mm(1.57*0.79*1.63in).
【HIGH QUALITY & PERFORMANCE】Standard 55KG high torque servo equipped with patent reinforced steel gear with PINS, three ball bearing, full Aluminium housing with groove surface for fast heat dissipation, accuracy with precision potentiometer..
【APPLICATION & 180 DEGREE ROTATION】AGFRC RC steering digital servo motor uses high-precision production technology to reduce production deviation and improve product tightness, ideal for 1/8 1/10 Buggy /Monster Trucks/RC car/boat/plane/helicopter/robot..
【SATISFIED CUSTOMER SERVICE】Please read the detail description of this RC car brushless servo motor first, if any ideas about our high torque digital servo, contact us first & We will provide you a better solution, and make you satisfied..
Dorhea 10PCS ESP8266 WiFi Development Internet Board NodeMCU LUA 4M Flash Serial Wireless Module CH340 Serial WiFi WLAN Communication Compatible with Ardui no IDE/Micropython
ESP8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime..
ESP8266 CH340 chip, power your development in the fastest way combinating with NodeMcu Firmware.
It's a IOT unit with all available resources on board, support smart link and smart networking..
Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area..
Smart hardwares easily, if you want to do some remote control projects, the cheap but useful NodeMCU board can help you. the embedded MCU and wifi functions let us be able to remotely control our hardwares..
DIY a smart car: If together with the motor or servo extension board, one can diy a smart robot, e.g., rc car, tank chassis..
【CHANGE DIRECTION OF ROTATION】Servo Reverser can change the direction of rotation of the servo. Just install them in series in the servo channel..
【COMPACT SIZE】Compact size and light weight without putting extra burden on your drone and suitable for carrying anywhere. Perfect workmanship, easy to install and disassemble, the ideal upgrade accessory for your drone..
【OPERATING VOLTAGE】5.0-6.0V (directly connected to the receiver), Current: 2A, Length: approx 6 cm / 2.36 inch..
【STABLE PERFORMANCE】The RC servo signal reverser is made of PCB material, which is durable and solide to use for a long service life. High-precision PCB ensures stable performance and excellent functions, suitable for your RC done..
【WIDELY USED】The Rotation Inverters widely used in JR Futaba Aircraft, RC Aircraft Steering Gear. Package includes 1x Servo Signal Reverser with JR male and female type plug..
Favordrory 30 Pieces 3-Pin Extension Cable Cord Male to Female Lead Wire Connectors for Servo Extension Connection Control Board Remote Control Parts, 5 Sizes
Size: 5 different lengths of 10 cm/ 3.95 inch, 15 cm/ 5.9 inch, 30 cm/ 11.8 inch, 50 cm/ 19.7 inch and 60 cm/ 23.6 inch, each length has 6 pieces servo extension cords.
Quantity: this package includes 30 pieces of female to male servo extension cable, enough for you to use, different length can meet your different needs.
Good connector: the connector of these wires are Futaba style connector with 3 pins, and it has an angle, in case you will install incorrectly, very convenient.
Feature: Female to male servo extension cable: featured with female connector on one side and male connector on the other side, can be connected to the receiving set and steering engine.
Widely Application: these servo extension leads can be applied for Futaba and JR servo, plane and helicopter servo connection or receiver connection, remote control car, RC Car.
BETU 35KG Coreless High Torque RC Servo，Waterproof Servo with Full Metal Gear, Steering Servo with 25T Servo Horn（270°）
【Excellent Quality steering servo】Equipped with strong copper & stainless steel Gear, CNC aluminium middle shell, Less noise, light weight, Stable and water-proof..
Widely Use Rc Servo】The servo (Control Angle 270°) Compatible with 1/6，1/8, 1/10, 1/12 Scale Clawer Truck, Traxxas, scx10, RC Car / Robot / Boat and other remote control models..
【Waterproof Servo】Waterproof performance: IP66. Controllable angle range from 0 to 270 degrees, Excellent linearity, Precision control..
【35KG Servo Standard Size】40 x 20 x 38.5 mm ( 1.58 x 0.79 x 1.50 in).
