DIYmalls BN-180 GPS Module TTL Dual Glonass GPS + GPS Passive Antenna for Arduino Raspberry Pi Pixhawk Aircraft CC3D Betaflight Flight Control
BN180 GPS Module can show your speed. When you use it for Raspberry Pi, there is no driver needed. Here is connection with RPi, red to 3.3v, black to....
When you power up bn 180 GPS module the first time in a new location, it always takes longer to find satillites. This is referred to as “cold....
Data Level : TTL or RS-232,Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable.
BN 180 gps doesn't have flash and compass. If you need it, please buy bn-880 gps module via "Visit the DIYmalls Store".
If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page,....
DTECH DB9 RS232 Serial Cable Female to Female Null Modem Cord Cross TX RX line for Data Communication (5 Feet, Black)
Simple serial null modem cable (3 wire type and no hardware handshaking) extends a COM port connection between computer and some old device with RS-232 compatible.
Wired as a 9 pin serial port Null-Modem cord that 2-3 line are crosslinked (only TX/RX data and signal ground wires connected).
standard shielded DE9 female RS232 cable with AL foil.
DB9 female to female adapter extender equipped with screws on each end to ensure an easy and solid connection for stable serial cross data communication.
The wires inside are of 30AWG gauge and easy to solder to, and they connect to the pins in the order of the standard wire color code.
5 feet short null serial cord f/f for hooking up RS232C equipment like scanner, Modem, printer, plotter, camera, barcode / embroidery machine, touchscreen, microcontroller, factory test equipment.
Cable Matters USB to Serial Adapter Cable (USB to RS232, USB to DB9) 3 Feet
USB to RS232 adapter cable connects from the USB-A port of a computer to a device with a female DB9 port.
Bus-powered Serial to USB adapter connects to devices for configuration or programming.
Male to male serial to USB cable provides a convenient solution for communicating with equipment that require a DB9 connector.
Use a DB9 mini gender changer (sold separately) if the connector of the RS232 to USB adapter will not mate with the equipment port.
Simple installation of the USB Serial adapter using the drivers available for download from Cable Matters.
Connect a null modem adapter (sold separately) to directly connect two computers with serial cables.
Windows & Mac compatible USB to Serial cable for Windows 2000/XP/Vista/7/8/10 and MacOS 10.6 and above.
The 9 pin to USB adapter may require additional proprietary software some equipment models.
RS-232 compatible db9 to USB adapter is required for many types of equipment including a CNC Machine, GPS, telescope, Set-top box, Cisco network switch, sewing Machine and more.
Tera Grand - Premium USB 2.0 to RS232 Serial DB9 Adapter - Supports Windows 11,10, 8, 7, Vista, XP, 2000, 98, Linux and Mac - Built with FTDI Chipset
OS SUPPORT - Supports Windows 10, 8, 7, Vista, 2000, XP, 98, Apple MAC OS8 or higher, Linux 2.4.0 and later, OpenBSD 2.9 and later & FreeBSD 4.7 and later.
USB2 TO RS232 - Installed as a standard Windows COM ports, Full RS-232 modem control signals, RS-232 data signals.
TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI, GND.
CONNECT SERIAL DB9 DEVICES - Provides instant connectivity with modems, ISDN terminal adapter, PDA, bar code scanner, label printer, and devices with DB9 SERIAL ports.
Download the latest Windows 10 driver from Tera Grand's web site.
EXTENSION CABLE INCLUDED - Package includes a 32 inch USB male to female extension cable..
DTECH DB9 RS232 Serial Cable Male to Male Null Modem Cord Full Handshaking 7 Wire Crossover for Data Communication (1.5 Feet, Black)
1.5ft serial null modem serial cable (7 wire type and full handshaking) connects your computer to device with COM port RS-232 compatible interface.
Wired as a 9 pin serial port Null-Modem cord that 2-3, 4-6, 7-8 line are cross linked (TX,RX,RTS, CTS, DTR,DSR wires are connected).
standard shielded DE9 male RS232 cable with AL foil.
DB9 male to male connector on each end equipped with screws to ensure an easy and solid connection for stable serial cross data communication.
The wires inside are of 30AWG gauge and easy to solder to, and they connect to the pins in the order of the standard wire color code.
1.5 feet short null serial adapter for hooking up PC laptop to some old RS232C equipment like scanner, Modem, printer, plotter, camera, barcode / embroidery machine, touchscreen, microcontroller, factory test equipment.
DTECH DB9 RS232 Serial Cable Male to Female Extension Null Modem Cord Cross TX RX line for Data Communication (5 Feet, Black)
Simple Serial Null Modem extension cable (3 wire type and no hardware handshaking) extends a COM port connection between computer and some old device with RS-232 compatible.
(Not VGA-CABLE) Wired as a 9 pin serial port Null-Modem cord that 2-3 line are crosslinked (only TX/RX data and signal ground wires connected).
standard shielded rs232 extender cable with AL foil.
DB9 male to female crossover adapter extender equipped with screws on each end to ensure an easy and solid connection for stable data communication.
The wires inside are of 30AWG gauge and easy to solder to, and they connect to the pins in the order of the standard wire color code.
5 feet short DE9 serial extender cord m/f for hooking up RS232C equipment like scanner, Modem, printer, plotter, camera, barcode / embroidery machine, touchscreen, microcontroller, factory test equipment.
DTECH DB9 RS232 Serial Cable Male to Female Null Modem Cord Full Handshaking 7 Wire Crossover for Data Communication (15 Feet, Black)
15ft male to female serial null modem cable (7 wire type and full handshaking) connects your computer to device with COM port RS-232 compatible interface.
Wired as a 9 pin serial port Null-Modem cord that 2-3, 4-6, 7-8 line are cross linked (TX,RX,RTS, CTS, DTR,DSR wires are connected).
standard shielded DE9 rs232 cable male to female extender with AL foil.
DB9 female to male connector on each end equipped with screws to ensure an easy and solid extension connection for stable serial cross data communication.
The wires inside are of 30AWG gauge and easy to solder to, and they connect to the pins in the order of the standard wire color code.
15 feet long null serial adapter m/f for hooking up PC laptop to some old RS232C equipment like scanner, Modem, printer, plotter, camera, barcode / embroidery machine, touchscreen, microcontroller, factory test equipment.
DTECH DB9 RS232 Serial Cable Male to Female Null Modem Cord Full Handshaking 7 Wire Crossover for Data Communication (1.5 Feet, Black)
1.5ft male to female serial null modem cable (7 wire type and full handshaking) connects your computer to device with COM port RS-232 compatible interface.
Wired as a 9 pin serial port Null-Modem cord that 2-3, 4-6, 7-8 line are cross linked (TX,RX,RTS, CTS, DTR,DSR wires are connected).
standard shielded DE9 rs232 cable male to female with AL foil.
DB9 female to male connector on each end equipped with screws to ensure an easy and solid connection for stable data communication.
The wires inside are of 30AWG gauge and easy to solder to, and they connect to the pins in the order of the standard wire color code.
1.5 feet short null serial adapter m/f for hooking up PC laptop to some old RS232C equipment like PTZ, scanner, Modem, printer, plotter, camera, barcode / embroidery machine, touchscreen, microcontroller, factory test equipment.
Geekstory BN-220 Dual GPS Glonass Module Navigation TTL Level 9600bps + GPS Passive Antenna for Arduino Raspberry Pi Pixhawk F3 CC3D Betaflight F4 Flight Control
BN-220 gps module has flash to save configuration, so you do not need to reset data next time when you use it. But it has no compass. If you need gps with flash and compass, please buy bn-880 from Geekstory..
When you use it for Raspberry Pi, there is no driver needed but you need to install software.
The TX LED flash means gps module output normally.The PPS LED flash means gps module locate your place..
Data Level : TTL or RS-232,Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable.
BN 220 gps module documentation link cannot be displayed. If you need technical documentation, please click “Ask a question” to em-ail us.
