Best Boat Bilge Pumps Automatic

Seachoice 12121 3-Position Boat Toggle Switch – On/Off/On

  • Single pole, single throw on/off/on toggle switch is suitable for many general applications including operation of lights, bilge pumps, blowers and baitwell pumps.
  • Inclusive of a chrome plated brass handle, mounting stem and face nut.
Check Stock

attwood 4622-6 Tsunami Replacement Motor Cartridge, for Model T800 Pumps, 800 GPH, 12-Volt, 29-Inch Wire

  • Easy-to-install direct replacement for the motor cartridge of model T800 Tsunami aerator and bilge pumps.
  • Reliable, self-contained unit that locks securely into the pump.
  • Installs easily, fits properly, and delivers outstanding performance.
  • Intended for use in the T800 models of the Tsunami Aerator Pump, Tsunami Dual Outlet Aerator Pump, and Tsunami Bilge Pump.
  • 12-volt Motor Cartridge installs with a 29-inch wire.
Check Stock

attwood 4620-6 Tsunami Replacement Motor Cartridge for Model T500 Pumps 500 GPH 12-Volt 29-Inch Wire

  • Easy-to-install direct replacement for the motor cartridge of model T800 Tsunami aerator and bilge pumps.
  • Reliable, self-contained unit that locks securely into the pump.
  • Installs easily, fits properly, and delivers outstanding performance.
  • Intended for use in the T500 models of the Tsunami Aerator Pump, Tsunami Dual Outlet Aerator Pump, and Tsunami Bilge Pump.
  • 12-volt Motor Cartridge installs with a 29-inch wire.
Check Stock

Shoreline Marine Bilge Pump with Float Switch, 800 GPH

  • The pump securely clips into the mounting base for easy installation and for removal to clean and inspect the pump.
  • The self-contained automatic switch will detect water and automatically turn the pump on, when the water is gone shut the pump off.
  • The automatic bilge pump is completely submersible with a water pumping capacity of 800 GPH.
  • The ¾” O.D. outlet hose barb is designed to be used with standard ¾” I.D. bilge hose.
  • It’s ignition protected, uses a very low 5 amps operating current the wires are tinned marine grade.
Check Stock

TotalBoat TotalBilge Epoxy Based Bilge Paint for Boat Bilges Bulkheads Engine Rooms and Locker Areas Gray Quart

  • TOUGH, WATERPROOF BILGE PAINT: This marine paint resists chemicals, oils, acids, alkyds and solvents. Hard, durable epoxy coating is ideal for boat....
  • CHOOSE LIGHT GRAY OR WHITE: Paint boat bilge areas to protect and brighten so you can find & fix leaks and other problems before they become costly....
  • EASY TO USE: Apply 1-2 coats by brushing, rolling or spraying on prepared fiberglass, wood and metal.
  • EASY TO KEEP CLEAN: Remove grease, oil, and grime from the high-gloss finish using a cleaner/degreaser. TotalBilge won't lift, crack, peel, or stain.
  • CHOOSE COLOR AND SIZE: Available in White and Gray colors, in Quart and Gallon Sizes. COVERAGE: 250-300 sq ft/gal.
Check Stock

TotalBoat-488366 TotalBilge Epoxy Based Bilge Paint for Boat Bilges Bulkheads Engine Rooms and Locker Areas White Gallon

  • TOUGH, WATERPROOF BILGE PAINT: This marine paint resists chemicals, oils, acids, alkyds and solvents. Hard, durable epoxy coating is ideal for boat....
  • CHOOSE LIGHT GRAY OR WHITE: Paint boat bilge areas to protect and brighten so you can find & fix leaks and other problems before they become costly....
  • EASY TO USE: Apply 1-2 coats by brushing, rolling or spraying on prepared fiberglass, wood and metal.
  • EASY TO KEEP CLEAN: Remove grease, oil, and grime from the high-gloss finish using a cleaner/degreaser. TotalBilge won't lift, crack, peel, or stain.
  • CHOOSE COLOR AND SIZE: Available in White and Gray colors, in Quart and Gallon Sizes. COVERAGE: 250-300 sq ft/gal.
Check Stock

BBH Marine Boat Plastic Thru Hull Fitting Drain Fits 1\ Inch Hose

  • This fitting should be used above the waterline..
  • Our Thru-Hulls are meant for installation through the transom and are good for overflow use in livewell installations or as an exhaust port for a bilge pump..
  • Their construction is designed to resist degradation as a result of chemical and saltwater exposure..
  • Thru hull bilge fitting for Marine/Boat/Yacht..
Check Stock

Attwood 4650-7 Tsunami T800 Aerator Pump 800 GPH 12-Volt 3 ½-Inch Long Inlet Threaded ¾-Inch Diameter Outlet 29-Inch Wire

  • Easy-to-install direct replacement for the motor cartridge of model T800 Tsunami aerator and bilge pumps.
  • Reliable, self-contained unit that locks securely into the pump.
  • Installs easily, fits properly, and delivers outstanding performance.
  • Intended for use in the T500 models of the Tsunami Aerator Pump, Tsunami Dual Outlet Aerator Pump, and Tsunami Bilge Pump.
  • 12-volt Motor Cartridge installs with a 29-inch wire.
Check Stock

Jabsco 18670-0123 Marine Water Puppy Bilge / Sump Flexible Impeller Commercial Duty Pump 470-GPH 12-Volt 15-Amp Non-CE 1/2 NPT Ports Black

  • Flow rate: 8 USgallons/min (30.4 Litres/min), self-priming from dry up to 1.2m (4ft).
  • Small bilge debris present no problem to these bronze bodied, flexible impeller pumps.
  • Use for bilge pumping, livewell circulation, washdown and general pumping requirements.
  • For intermittent duty, motor may be reversed to empty bait tank.
Check Stock

STAR BRITE Liquid Electrical Tape Black 1 OZ. Tube (084154)

  • Forms an airtight, protective, waterproof, UV resistant, dielectric coating.
  • Prevents corrosion on wires and terminals, protects against vibration.
  • Patented, UL-tested, fast drying formula.
  • Adheres to all metal, plastic, vinyl, rubber and composite surfaces.
  • Stops terminal screws from loosening due to vibration.
  • 100’s of uses – bilge pumps, outdoor exposed wiring, sprinkler pumps, timers, underground wiring, outdoor lighting fixtures, instruments, anywhere a weatherproof and dependable connection is needed.
  • Can be applied to irregular shaped and hard to reach connections.
Check Stock