LAOA Water Pump Pliers,V-Jaw,Tongue and Groove Pliers,7-Inch
Made in Taiwan,Meets DIN and ISO standards.The plier body is made of SAE1060,Constructed with oil-hardened for strength and durability..
V-jaw design,clear gripping teeth,Gripping surfaces fashioned with special induction-hardened teeth for low wearing and secure gripping.
Pliers wrench 7 inch,185mm total length,42mm Max gripping scope.The groove pliers tool can grip flat, round, hexagonal, and square pieces firmly..
Pressing PUSH nuts and sliding handle to control the size of opening.Self-locking on pipes and nuts,no slipping on the workpiece.Apply to bolts, and pipes or to clamp, grip, and twist various fasteners and fittings..
Ergonomic handle design,with double plastic covered makes conmfortable hand feeling..
PRO BIKE TOOL 3/8 Inch Drive Click Torque Wrench Set 10 to 60 Nm – Bicycle Maintenance Kit for Road & Mountain Bikes, Motorcycle Multitool - Includes 1/2" & 1/4" Adapters, Extension Bar & Storage Box
...e Measurement – High Torque Settings - Install components with calibrated precision - 10.0 to 60.0 Newton Meter (88 to 530 inch pounds) torque range with micro adjustment to 0.5 Nm. Designed for higher torque setting repairs and installations including: bottom bracket, cassettes, cassette lock ring, crank - sets, bolts & arms, pedals and disc brake rotors..
Peace Of Mind Protect Your Investment – Over-tightening bolts can cause expensive damage to your bike. Applying too little torque can lead to bolts working loose or not doing their job. Our 3/8-inch drive dual-direction torque wrench driver removes the guesswork, making it easy to follow the manufacturer’s recommended settings. Each hand tool is shipped pre-calibration tested for accuracy, +/- 4% (clockwise) and +/- 6% (counter clockwise). Torque wrench length: 27.7cm/10.9", width: 3.1cm/1.22.
Safe & Easy To Use & Read – Smooth and precise operation. Spring loaded adjustment collar automatically ‘locks’ in place at the desired torque setting, ensuring it will not accidentally slip when being used. High-contrast Nm scale is easy to read. Wrench emits a ‘click’ that can be ‘heard ....
AUXITO Error Free 912 921 T15 LED Bulbs 4000 Lumens/Pair Extremely Bright CSP 9-SMD Plug and Play for Backup Reverse Lights 6500K White Pack of 2
(Pack of 2) 921/912 LED replacement bulbs, voltage: DC9V-30V, each bulb powered by 9 pcs CSP chips, bulb body material: aviation aluminum.
921/912 LED backup reverse light bulbs: about 2000 lumens each bulb, color temperature: 6500K. Bulb bottom diameter: 3cm (1.18in), wire length: 3.6cm....
Plug and play design, suit for socket: T15, 912, 921, 906, 904, 902, W16W, etc, used for backup reverse lights only, ideal for customers who are....
With CSP LED chipsets, higher stability, better for heat dissipation and achieve maximum light efficiency comparing with ordinary LED chip. Aviation....
Amazon filter system may not be 100% accurate, the bulb size may vary between trim of your vehicle.Please double check owners manual or original bulb....
PRO BIKE TOOL 1/4 Inch Drive Click Torque Wrench Set – 2 to 20 Nm – Bicycle Maintenance Kit for Road & Mountain Bikes - Includes Allen & Torx Sockets, Extension Bar & Storage Box
...and that clamping forces are distributed evenly across clamping surfaces. This helps prolong the life of high-performance components and prevents damage from over tightening. Ideal for use on stems, seat clamps, lever clamps, chain sets, rotors and headsets..
Peace of Mind Protect Your Investment – Over-tightening bolts can cause expensive damage to your bike. Applying too little torque can lead to bolts working loose or not doing their job. Our 1/4-inch drive dual-direction torque wrench driver removes the guesswork, making it easy to follow the manufacturer’s recommended settings. Each hand tool is shipped pre-calibration tested for accuracy, +/- 4% (clockwise) and +/- 6% (counter clockwise)..
Safe & Easy to Use & Read – Smooth and precise operation. Spring loaded adjustment collar automatically ‘locks’ in place at the desired torque setting, ensuring it will not accidentally slip when being used. High-contrast Nm scale is easy to read. Wrench emits a ‘click’ that can be ‘heard and/or felt’ when the pre-set torque value is reached, alerting you to ‘stop’ applying force. Important: At low Nm settings under 5 Nm the click can be ‘subtle’. Between 5 & 20 Nm the click will be stronger..
Material: Stainless Steel, the material of the black back piece is plastic..
Contact Us: If you are not sure if part is correct, ask us in Customer questions & answers section or contact us by visiting the AMI PARTS storefront..
Alla Lighting Super Bright T10 T15 912 921 LED Bulbs Back Up Light 6000K Xenon White 3020 SMD 12V W16W Reverse Lights
(Set of 2) 1000 lumens per 921 LED bulb, total 2000 lumens for both LED 921 bulbs. Chips: 14 pieces high quality,high power with high performance 3020 led chips per led bulb ---360 degree full angle illumination.
6063 aviation aluminum heat material, Working Voltage: 12V~18V with built in IC driver for better working performance.
Application: back up reversing lights or center high-mounted stop light. CANBUS error free design, for most vehicles, just plug-n-play, yet for some vehicles with CAN-BUS system, load resistors maybe required to avoid the error code..
One Year warranty. Please check the owner manual or the stock lamp to confirm the cross reference number before purchasing. Amazon fitment is only for reference, not 100% guaranteed accuracy..
Known as Hex Flange Nuts, Flange Lock Nuts, Spindle Nuts, Blade Lock Nuts, this nuts are used to secure a blade to the spindle.
Work with MTD, Craftsman, Troy Bilt lawn mowers & tractors. Had been tested and confirmed to work with LT1040 LT1042 LT1046 LTX1040 mower deck spindles.
Replace the part# 712-0417, 712-0417A, 912-0417, 912-0417A, 753-05549, 112-0330.
PRO BIKE TOOL 1/4 Inch Drive Click Torque Wrench Set – Inch Pound Nm Dual Readout – Bicycle Maintenance Kit for Road & Mountain Bikes - Includes Allen & Torx Sockets, Extension Bar & Storage Box
...and that clamping forces are distributed evenly across clamping surfaces. This helps prolong the life of high-performance components and prevents damage from over tightening. Ideal for use on stems, seat clamps, lever clamps, chain sets, rotors and headsets..
Peace Of Mind Protect Your Investment – Over-tightening bolts can cause expensive damage to your bike. Applying too little torque can lead to bolts working loose or not doing their job. Our 1/4-inch drive dual-direction torque wrench driver removes the guesswork, making it easy to follow the manufacturer’s recommended settings. Each hand tool is shipped pre-calibration tested for accuracy, +/- 4% (clockwise) and +/- 6% (counter clockwise)..
Safe & Easy To Use & Read – Spring loaded adjustment collar automatically ‘locks’ in place at the desired torque setting, ensuring it will not accidentally slip when being used. High-contrast In-Ib (main readout) & Nm read-out scales are easy to read – Wrench emits a ‘click’ that can be ‘heard and/or felt’ when the pre-set torque value is reached, alerting you to ‘stop’ applying force. At low Nm settings 003c50 lb the click can be ‘subtle’. Between 50-150 lb the click will be stronger..
Right Tools For The Job – Includes (metric) He....
PRO BIKE TOOL 1/4 Inch Drive Click Bike Torque Wrench Set – 2 to 20 Nm – Bicycle Torque Wrench Maintenance Kit for Road & Mountain Bikes - Includes Allen & Torx Sockets, Extension Bar & Storage Box
...and that clamping forces are distributed evenly across clamping surfaces. This helps prolong the life of high-performance components and prevents damage from over tightening. Ideal for use on stems, seat clamps, lever clamps, chain sets, rotors and headsets..
Peace of Mind Protect Your Investment – Over-tightening bolts can cause expensive damage to your bike. Applying too little torque can lead to bolts working loose or not doing their job. Our 1/4-inch drive dual-direction torque wrench driver removes the guesswork, making it easy to follow the manufacturer’s recommended settings. Each hand tool is shipped pre-calibration tested for accuracy, +/- 4% (clockwise) and +/- 6% (counter clockwise)..
Safe & Easy to Use & Read – Smooth and precise operation. Spring loaded adjustment collar automatically ‘locks’ in place at the desired torque setting, ensuring it will not accidentally slip when being used. High-contrast Nm scale is easy to read. Wrench emits a ‘click’ that can be ‘heard and/or felt’ when the pre-set torque value is reached, alerting you to ‘stop’ applying force. Important: At low Nm settings under 5 Nm the click can be ‘subtle’. Between 5 & 20 Nm the click will be stronger..
