OSCARBIDE Boring Bar Set ,Bar holders are made of high quality steel with coated, inserts with Tin-coated are made of carbide,for moistureproof, rust-proof,for long time use.
Round shanks allow the operator to set positve or negative rake,chip breaker eliminates long stringer chips.
Carbide Inserts can be indexed, when it is dull use another sided,It is not necessary to remove tool from chuck or tool post.
Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
Replacement insert for this kit ,please search the Asin of item: B07Q2HNGVF & B07R6M1F3H.
NewkeepsR 1PC-18ga G23 Titanium Press Fit Threadless Push Pop In 2.5mm Cubic Zirconia Top Labret Lip Monroe Nose Stud Tragus-6mm/8mm
Bar Thinkness 18ga(1.0mm) ,bar inner length 8mm(5/16”) with 2.5mm cubic zirconia stone top.To avoid 8mm bar too long,we attach another 6mm bar with free.Labret base back is flat and small,Much comfortable than butterfly earring back.Sleeper-type earring studs..
No thread,push into/pull apart the pin from straight labret bar direclty.Threadless labret uses tension between the end and the shaft to fit and stay together.The end has an insertion pin which is slightly bent when inserted into a straight shaft..
when insert the threadless top,pls make sure if the top is tight enough, if too loose,pls adjust via below instruction: 1) insert the pin halfway into the labret bar. 2) bend the pin very slightly by hand. 3) fully insert into the labret bar 4) make sure if the pin tight enough.
Material: Titanium 6AL4VELI ASTM F-136 implant grade,Titanium has excellent biocompatibility and is half the weight of surgical steel.
14 Pieces Lathe Boring Bar Set 4 Pieces 95 Degree S07K/ S08K/ S10K/ S12M-SCLCR06 Lathe Boring Internal Turning Bar Holder with 10 Pieces CCMT0602 Carbide Inserts and 4 Pieces Wrench
Package includes: you will receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
The cemented carbide material makes the turning tool durable and adaptable.
Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
cutting angle is 95 degree, cutting direction is right hand.
Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
Tight impact bolts, simple structure, often applied for small hole processing.
TEC Accessories Ti-Pry Titanium Small Pry Bar Pocket Tool, Keychain Accessories for EDC Gear Multi Tool, Bottle Opener Keychain for Men and Women, Cool Keychains, Key Accessories Keychain Edition
6AL-4V (GRADE 5) TITANIUM: Machined from a solid billet of 6Al-4V Titanium stock. Titanium is known for its corrosion resistance and has a very high strength-to-weight ratio..
MULTI-FUNCTIONAL TOOL: The pry tip on this Keychain Edition has a thinner profile than our Ti-Pry Pocket Edition, making it easier to get into those tight gaps. Ti-Pry pry bar tip is perfect for prying, scraping, box opening, and wedging.
INTEGRATED BOTTLE OPENER: The custom profile cutout is ideal for opening bottles of all types. It's perfectly sized to be fully functional, yet discretely hangs on your keychain ready for action. And at the end of a hard day, the integrated bottle opener will certainly come in handy..
ERGONOMIC: Multiple ergonomic design features allow you for maximum grip when using the Ti-Pry pry bar. The Ti-Pry Keychain Edition is a mini titanium pry tool perfectly suited for everyday keychain carry..
SMALL AND LIGHTWEIGHT: Small enough to be easily carried on your keychain. Small, lightweight and extremely durable, it can make those daily tasks and even the not-so-common chores a breeze ....
Product - Boring Bar Set ,Bar holders are made of high quality steel with coated, inserts with Tin-coated are made of carbide,for moistureproof, rust-proof,for long time use..
Parameter - Positive Rake 90Degree Lead, Uses 0.050 key, C6 grade: carbide for steel and alloy steel..
Function - Round shanks allow the operator to set positve or negative rake,chip breaker eliminates long stringer chips..
Feature - Chip breaker eliminates long stringer chips, A new cutting edge may be presented by simply, indexing the insert..
Application - Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine..
...on roulette is the perfect gift for any event or celebration! From Christmas, Thanksgiving, New Years, Memorial Weekend, Birthday, Wedding, or any Holiday this makes the perfect Novelty Gifts and makes it the best adult games for game night or any adult party.
GIFTABLE: What perfect gifts for drinkers tired of those boring drinking card games? Alcohol Gifts that make the perfect White Elephant Gifts for Adults! Or simply tired of your old CFairly Odd Novelties has you covered. With this Funny White Elephant Gift you give the gift of the best Adult Game Night.
GREAT ADDITION TO A GIFT SET: Putting together Alcohol Gift Sets, a Bar Accessories, or Tailgate Games for your ? Or ready to gift, ready for some Drunk Games? This Shot Glass Set with Spinning Wheel Roulette Drinking Game is also the perfect Christmas Shot Glass gift.
DRINKING GAMES FOR ADULTS PARTY: Fun Gifts For Adults is what we do! Doesnt matter if it's casino game night or just need adult games for parties. These party games for adults makes for the best Adult Party Game Night.
BAR ACCESSORIES: You got it, what bar is complete without the. Shot Glass Roulette Drinking Games! Bar Games dont get anymore lively then Spinning Wheel and taking a Shot of your favorite Liquor. Complete your Bar G....
Exceed Designs TIRANT RAZOR-M Micro Slide Utility Knife & Pry Bar (Stonewashed) 6Al-4V Titanium Pocket Knife, EDC Tool, Box Cutter
This Exceed Designs ‘TiRant RAZOR-M Micro’ utility knife, EDC pocket knife & pry bar is CNC milled from a solid block of 6Al-4V Titanium. The full titanium monoblock construction is built to last a lifetime and features our Tri-Level pressure slide aided by 3X black ceramic bearings. The ultra-light titanium design only weighs 0.5oz and nearly matches the thickness of just 2 home keys! This knife is available in stonewashed or jet-black ti plated color and includes 10X generic razor blades..
ULTRA-THIN & LIGHTWEIGHT — We named this the ‘TiRant-M Micro’ for a reason! This ultra featherweight CNC-Milled precision Titanium 6AI-4V monoblock frame EDC utility knife is ONLY 0.15” thick, one of the thinnest EDC pocket knives ever made! The TiRant Micro weighs so little that you can attach it to your keyring or carry it in your pocket without even noticing it’s there. This is a must-have Utility Knife / EDC tool with the combined feature of a titanium pry bar!.
HOW TO USE — This minimalist titanium EDC tool features a sliding mechanism to engage the blade against the locking pin. (See image 4). To engage the blade, simply press down on the blade and slide it into the desired position WHILE cradling ONLY the upper and lower sections of the frame....
NewkeepsR 2PCS-18G/16G Implant Grade Titanium Pin Insertion Taper for Threadless Labret Bar 1.0mm/1.2mm
Sold as 2 PCS: one taper is 18ga(1.0mm) thickness,another is 16ga(1.2mm),Length: 38mm (approx 1.5 inch). A thin pin at the end(no thread/no hole).Material: 6AL4VELI ASTM F-136 implant grade titanium ,Titanium has excellent biocompatibility and is half the weight of surgical steel..
Function:① Stretch hole for gauge modification purpose(from 20g to 18g/16g),Good piercing hole stretch/expander kit.Make your stretching journey safe and easily. ② Used for assisting in the placement of shaft/post. Put threadless piercing bar in the end of the pin, then push it though.Pin will come out of the hole and threadless piercing bar/post will be in. ③ Changing your nose piercing nostril stud much easier.Highly recommend to change threadless/press-fit into jewelry!.
Attention:① Our threadless insertion pin only fit our threadless piercing jewelry,others is unfit. ② Make sure to use some kind of vitamin e or mineral oil for lubricant while stretching. ③ If you had sensitive skin using this titanium insertion pin is very safe..
5Pcs Titanium Rod Dia 6mm 0.236 Length 500mm 19.685 RISON Titanium GR5 Titanium Bar 6al-4v Round Bar 6mmx500mm Titanium Round Rod
Dimension: 500MM (19.685") x 6MM(0.236") diameter..
Material: GR5 Titanium Alloy Ti-6Al-4V with unpolished Mill Finish..
Merit: high strength-to-weight ratio, light weight, and Never rust..
Service: Credit Suisse Titanium has been focusing on titanium products for ten years and has a rich inventory of high-quality raw materials. Titanium material is healthy and environmentally friendly, lighter than aluminum, harder than steel, and far superior to organic materials such as stainless steel. We hope to provide you with high-quality products and satisfactory service..
