Best Boring Head Tool Holder

Bosch HDS182-02 18-volt Brushless 1/2-Inch Compact Tough Hammer Drill/Driver with 2.0Ah Batteries, Charger and Case

  • Brushless Motor: Up to 2x the motor life, superior efficiency for longer runtime and no maintenance.
  • Advanced Electronics: Electronic motor and cell protection help prevent overheating and overloading for extended tool life and runtime.
  • Most Compact Head Length: Most compact head length in its class for easy control in tight spaces.
  • Dura shield Housing: Designed and tested to withstand multiple 10 ft. drops.
  • 4x Bit Tip Holder: Convenient on-tool bit storage for magnetic bit holder.
Check Stock

GBJ- MGIVR2016-2 + 10PCS MGMN200-G Boring Bar 2mm Grooving Insert Lathe Cutting Tool Holder 16mm 5/8\ Grooving Cut-Off Cutter for MGMN200 Carbide Inserts Holder (MGIVR2016-2 +MGMN200)

  • 1. Model : MGIVR2016-2 Right hand Internal Grooving holder / Boring Tools.
  • 2. Inserts applied: MGMN200-G (Grooving inserts).
  • 3. Shank Diameter: 5/8" inch / 16*16mm, Overall length: 180mm/7.08" , Groove width: MGMN200.
  • 4. Package includes: 1Pc of MGIVR2016-2 Tool-holder + 10PCS MGMN200-G NC3020 + Wrench : L.
  • 5. Advantage: High hardness, good toughness, good wear resistance, heat resistance. Imported base material, high-quality coating.
Check Stock

Pointer Knob, 1-1/8, 1/4X1/2 PH, 8-32 SS

  • Made from alloy steel 5155 with heat treat to RC 56-58.
  • Head Diameter?0.747" Head Angle ?15° Drawbar Thread Size?5/8"-11 Machine Taper Size ?CAT40 Neck Diameter?0.549" Hole?0.281" Pilot?0.641" Overall Length?2.001" Shoulder To Head?0.787" Shoulder To End?1.024".
  • High quality black oxide finish to ensure long enduring tool life.
  • Each retention knob is individually magnetic particle tested to ensure free of crack.
  • Fully ground on all critical surface including a pilot under the flange of retention knob for full contact between tool holder's taper end and retention knob.
Check Stock

The Chosen Ones: A LitRPG Adventure (Master Hunter K, Book 2)

  • What is in the package?EFIXTK watch band tool kit comes with a watch band link pin remover with 6 extra tips, a plastic watch holder, a dual head hammer, 4 pin punches,20pcs cotter pins and a glasses cloth. A perfect kit for watch band link remove and watch repair.
  • Easy to use: Size your watch band yourself with this small, simple tool effectively without wiggling.
  • Fit for different sizes,Fit bands up to 30mm wide ,6 replacement pins and an adjustable base allow for use with different band thicknesses.
  • VALUE KIT FOR MONEY SAVING - This watch band link remover is great for removing and inserting spring bars straps, and widely used in up to 30mm wide watch band replace, watch repair and jewelry making.
  • Package contents: 1PCS All-Metal Watch Band Link Remover,1PCS Holder,1PCS Head Hammer,1PCS Glasses Cloth,20pcs Cotter pins.
Check Stock

JRT 5pcs 16ER AG60 External Threading Inserts + 16IR Internal CNC Lathe Indexable Carbide Insert Blade for Tool, Gold, length: 16mm ,pitch :0.5-3.0mm

  • ☞ Inserts Size: 16ER- 3/8" right hand . Partial profile: 60 degree, Pitch : 0.5--3.0mm, insert length:16mm. Suitable for machining Stainless steel and Steel parts.
  • ☞ Inserts Feature: carbide with PVD coating , Coating endows inserts strong impact resistance, good versatility with high precision, high finish and high wear resistance..
  • ☞ Boring Bar Size: Internal left hand holder, 5.9"/150mm long , 0.51"/ 13mm high, Screw size : M3.5 x 10, T15 wrench.
  • ☞ Boring Bar Feature : Strong steel as material, laser lettering on holder. Anti-rust oil wiped on holders to prevent from oxidation. Plastic box packing ,easier to store..
  • ☞ Package Includes: 1× SNL0013M16 Boring bar + 10pcs 16ER AG60 Carbide inserts + Wrench T15.
Check Stock

iCarbide R8 Boring Head and 1/2 Shank Boring Bar 6pcs Set Inserts Included 1/2 - 4

  • Inserts included TBGT 06 ,TPGT 09 ,TPCT1103.
Check Stock

4 PC 1/2\ Shank Indexable Boring Bar Set Free TCMT Insert

  • Inserts included TBGT 06 ,TPGT 09 ,TPCT1103.
Check Stock

Goliathan

  • POWER AND FLEXIBILITY: The 79cc Viper Engine spins a 9” spring steel blade at 3400 RPMs providing the power and speed you need to accomplish lawn,....
  • MUTI-ANGLE CUTTING: Our multi-position pivoting head offers 5 different cutting angles from 70-110 degrees allowing the user to select the angle that....
  • PRECISION LINES: Clean professional lines can be easily achieved regardless of grass type when you combine the balance of a 4-wheeled design with....
  • FLEXIBLE DEPTH CONTROL: Take complete control over your depth of cut with our flexible control mechanism. From the operating position, engage the....
  • DEBRIS GUARD AND TOOL HOLDER: A durable chain skirting protects the operator from flying debris while the attached tool holder provides a convenient....
Check Stock

ASZLBYM 3/4 Lathe Internal Boring Bar Turning Tool Holder S20R-MWLNR08 with Indexable Carbide Turning Insert WNMG432

  • ♥package : 1pc S20R-MWLNR08 boring bar+ 10pcs WNMG432 carbide insert + 1pc wrench..
  • ♥ S20R-MWLNR08 turning boring bar : the cutting direction:right hand , the turning tool bar is made of high-quality alloy steel with Nickel Cotated,which can effectively improve the wear resistance, corrosion resistance and stability of the turning tool bar, for long time use..
  • ♥WNMG432 carbide insert : inserts are made of carbide and the coating material is TiN ,it can be used for finishing or semi finishing steel ,the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability ..
  • ♥The carbide inserts and turning boring bar are packed in plastic containers, safe and easy to store ..
Check Stock

OSCARBIDE 1/2 Round Shank 4 Pieces/Set Boring Bar Set,90 Degree with Indexable Carbide Inserts TCMT21.51 TCMT110204

  • OSCARBIDE Boring Bar Set ,1-1/4”to 2-1/2”Boring Depth ,7/16” to 1/2”Min Bore ,1-3/4” to 4” Overall length,Bar holders are made of high quality steel with coated, inserts with Tin-coated are made of carbide,for moistureproof, rust-proof,for long time use.
  • Allow the operator to set positve or negative rake,chip breaker eliminates long stringer chips.
  • Carbide Inserts can be indexed, when it is dull use another sided,It is not necessary to remove tool from chuck or tool post.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • Replacement insert for this kit ,please search the Asin of this item: B07Q2HNGVF to buy it.
Check Stock