Best Bosch Mini Router Trimmer

SpeTool Spiral Router Bits with UpCut 4 inch Extra Long1/4 inch Cutting Diameter 2 inch Cutting Length CNC Router Bit Carving Tool

  • Solid Carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 2 inch cutting length, 4 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dado with clean edge and bottom, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

SpeTool 12411 4 Flutes Carbide CNC Square Nose End Mill, 1/4 inch Shank Diameter, 3 inch Long, Upcut CNC Router Bit with Coated

  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
  • The Square CNC End Mill With Flat Top 4-Flute, Carbide with TiAlN Coated Gives outstanding cutting performance and wear resistance.
  • For CNC, Excellent performance to cut Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc, Up to HRC 55..
  • The Route Bit Suit for CNC, Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc. For better.
Check Stock

Jasper 290 Circle Cutter Router Jig - Router Circle Cutting Jig Cuts Perfect Circles from 1 1/2” to 18 3/16” D - Circle Cutting Jig Fits Most Popular Trim Compact and Cordless Routers

  • : The Jasper 290 router jig guide allows you to cut 268 different size circles from 1 ½” to 18 3/16” D with Most Popular Trim Compact and Cordless Routers.
  • : The 290 circle cutter router jig is made from high-quality, hardened acrylic and guaranteed to last..
  • : The circle cutting router guide includes calibration disc for precise centering and pivot pins as well as router mounting hardware to ensure perfect circle cutting paths..
  • : Bosch Colt GFK125, PR10E, DeWalt DCW600, DWP611, Kobalt 1439333: Makita XTR01, Metabo M1808, Milwaukee M18FUEL2723-20, Porter Cable PCE6430, 450PK, Rigid R86044B, R24012, Ryobi P601.
  • : THE JASPER Circle Jigs are WOOD MAGAZINE’S Grade A, Top Tool Circle Routing-Jig. The router circle cutter jig guide is a must have for Speaker Makers, Woodworkers, and DIYers of every kind..
Check Stock

JessEm Rout-R-Table Stand Bundle with JessEm Phenolic Mast-R-Top 24 x 32-Inch Router Table Top, Mast-R-Fence II Router Table Fence and JessEm Rout-R-Lift II Router Lift (4 Items)

  • Bundle Includes: JessEm Rout-R-Table Stand, JessEm Phenolic Mast-R-Top 24 x 32-Inch Router Table Top, JessEm Mast-R-Fence II Router Table Fence, JessEm Rout-R-Lift II Router Lift for Porter Cable, Dewalt and Bosch Routers with 3.5-Inch Diameter Motors.
  • Aluminum Dual Track: The JessEm Mast-R-Top comes with an extruded anodized aluminum dual track with a T-slot that accepts standard 1/4-inch hex head bolts or hex nuts and a standard 3/4-inch miter slot.
  • Router Table System: The table top comes pre-machined to fit JessEm’s Mast-R-Lift, Rout-R-Lift II, and Rout-R-Plate lift and router plates for building a router table system.
  • Premium Material: Made from laminated phenolic, which is one of the strongest, stable, and durable materials available for an industrial strength work surface.
  • Compatibility: The Table Top features a centered router opening measuring 9-1/4 x 11-3/4 inches that accepts most standard router plates and lifts (3/8-inch thick).
Check Stock

SpeTool Spiral Router Bits with DownCut 1/8 inch Cutting Diameter, 1/4 inch Shank CNC Bits Solid Carbide End Mill for Wood Cut, Carving

  • Solid Carbide spiral Downcut router bit with 1/4inch shank and 1/4inch cutting diameter, 1/2 inch cutting length, 2 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

SpeTool Spiral Downdcut Router Bits with 1/2 inch Shank, 1/2 inch Cutting Diameter Solid Carbide CNC End Mill for Wood Carving, Plunge Cut

  • Solid Carbide down cut spiral router bit with 1/2inch shank and 1/2inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/2” collet.
  • Industrial quality control to ensure best performance.
Check Stock

SpeTool 1/4 Shank Carbide End Mill for Aluminum Cut (3 Flutes, 3.5 inch Long) Non-Ferrous Metal Upcut CNC Spiral Router Bit

  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 1-1/2 inch Cutting Length, 3-1/2 inch for Total Length.
  • The Route Bits With Flat Top, 3-Flute, Upcut For Easy Chip Removal And Perfect Surface Finish. Clockwise Motion for Machining..
  • For Aluminum 6061,7075 etc. Non-ferrous Metal, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
  • The Carbide EndMill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

SpeTool 5PCS Ball Nose End Mill Cutter CNC Router Bits Double Flute HRC55 Spiral Milling Tool 1/4 Inch Shank 2-1/2 Inch Length OVL

  • 5PCS Solid Carbide Ball Nose Router Bit with 1/4 inch Shank and 1/8 inch Cutting Radius, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
  • The End Mill Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated.
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
  • The Ball Nose End Mill Suit for CNC Machine, Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

SpeTool 5PCS 2 Flutes Square Nose End Mill Set Power Milling Machine Carbide Upcut CNC Router Bits Tiain Coated, 1/4 inch Shank, 2 1/2 inches Long Overall

  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
  • Flat Top with 2-Flute, Material: Solid Carbide with TiAlN Coated for HRC 55.
  • For CNC Machine.Cutting Steel, Metal, Inconel, Stainless Steel, Titanium Alloy etc.
  • The Endmill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

KOWOOD Plus Round-Over Router Bit Set 1/4 Inch Shank Radius in 1/8” 5/32” 3/16” 1/4” with Updated Kowood C3 Carbide Great for Round Edges Ideal for Table Drawer or Cabinet Edges

  • KOWOOD Plus round over router bit set is an upgrade router kit designed for create flush decorative round edges..
  • KOWOOD Plus designed for Woodworking Lovers or Carpenter, provide a next-level experience..
  • KOWOOD Plus series router bits are all upgraded KOWOOD C3 carbide. This series of bits are in a heat-treated process, providing maximum durability of....
  • Wide range of applications, suitable for dense wood, laminate, particleboard, and plywood..
  • Universal 1/4" tool holder is suitable for all major desktop router workbenches, such as KOWOOD, Bosch, DeWalt, Tooldo, Makita, Milwaukee, MNA, Porter....
Check Stock