Best Bosch Router Motor

SpeTool Spiral Router Bits with UpCut 4 inch Extra Long1/4 inch Cutting Diameter 2 inch Cutting Length CNC Router Bit Carving Tool

  • Solid Carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 2 inch cutting length, 4 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dado with clean edge and bottom, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

SpeTool 12411 4 Flutes Carbide CNC Square Nose End Mill, 1/4 inch Shank Diameter, 3 inch Long, Upcut CNC Router Bit with Coated

  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
  • The Square CNC End Mill With Flat Top 4-Flute, Carbide with TiAlN Coated Gives outstanding cutting performance and wear resistance.
  • For CNC, Excellent performance to cut Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc, Up to HRC 55..
  • The Route Bit Suit for CNC, Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc. For better.
Check Stock

Jasper 290 Circle Cutter Router Jig - Router Circle Cutting Jig Cuts Perfect Circles from 1 1/2” to 18 3/16” D - Circle Cutting Jig Fits Most Popular Trim Compact and Cordless Routers

  • : The Jasper 290 router jig guide allows you to cut 268 different size circles from 1 ½” to 18 3/16” D with Most Popular Trim Compact and Cordless Routers.
  • : The 290 circle cutter router jig is made from high-quality, hardened acrylic and guaranteed to last..
  • : The circle cutting router guide includes calibration disc for precise centering and pivot pins as well as router mounting hardware to ensure perfect circle cutting paths..
  • : Bosch Colt GFK125, PR10E, DeWalt DCW600, DWP611, Kobalt 1439333: Makita XTR01, Metabo M1808, Milwaukee M18FUEL2723-20, Porter Cable PCE6430, 450PK, Rigid R86044B, R24012, Ryobi P601.
  • : THE JASPER Circle Jigs are WOOD MAGAZINE’S Grade A, Top Tool Circle Routing-Jig. The router circle cutter jig guide is a must have for Speaker Makers, Woodworkers, and DIYers of every kind..
Check Stock

Next Wave PRO RS1000 two Axis CNC Router Table setup for Dovetail, Box Joint, Rabbet, Dado, Lock Miter

  • The SHARK RS1000 PRO allows you to type in any desired measurement, press OK, and it will accurately move to that exact dimension, even if it is only one-thousandth of an inch, no more bumping or nudging needed!.
  • Toggles between input inches as fractions, decimals, or metric measurements so you don’t have to convert dimensions.
  • Fence and lift move accurately in direct relationship to the bit with movement as little as .001”.
  • WHAT IS INCLUDED: 3-1/2 inch travel CNC Servo Motor driven Router Lift, Fence with Feather Boards, , Control Pendent and software, CNC Servo Motor driven Fence, Includes template for cutting Hole in your home made Table top..
  • WHAT IS NOT INCLUDED: PRO Sliding Miter, Router Table Top or stand, Router motor(You will need to provide a router Motor with a 3-1/2 inch diameter Motor can, Bits,.
Check Stock

JessEm Rout-R-Table Stand Bundle with JessEm Phenolic Mast-R-Top 24 x 32-Inch Router Table Top, Mast-R-Fence II Router Table Fence and JessEm Rout-R-Lift II Router Lift (4 Items)

  • Bundle Includes: JessEm Rout-R-Table Stand, JessEm Phenolic Mast-R-Top 24 x 32-Inch Router Table Top, JessEm Mast-R-Fence II Router Table Fence, JessEm Rout-R-Lift II Router Lift for Porter Cable, Dewalt and Bosch Routers with 3.5-Inch Diameter Motors.
  • Aluminum Dual Track: The JessEm Mast-R-Top comes with an extruded anodized aluminum dual track with a T-slot that accepts standard 1/4-inch hex head bolts or hex nuts and a standard 3/4-inch miter slot.
  • Router Table System: The table top comes pre-machined to fit JessEm’s Mast-R-Lift, Rout-R-Lift II, and Rout-R-Plate lift and router plates for building a router table system.
  • Premium Material: Made from laminated phenolic, which is one of the strongest, stable, and durable materials available for an industrial strength work surface.
  • Compatibility: The Table Top features a centered router opening measuring 9-1/4 x 11-3/4 inches that accepts most standard router plates and lifts (3/8-inch thick).
Check Stock

SpeTool Spiral Router Bits with DownCut 1/8 inch Cutting Diameter, 1/4 inch Shank CNC Bits Solid Carbide End Mill for Wood Cut, Carving

  • Solid Carbide spiral Downcut router bit with 1/4inch shank and 1/4inch cutting diameter, 1/2 inch cutting length, 2 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

SpeTool Spiral Downdcut Router Bits with 1/2 inch Shank, 1/2 inch Cutting Diameter Solid Carbide CNC End Mill for Wood Carving, Plunge Cut

  • Solid Carbide down cut spiral router bit with 1/2inch shank and 1/2inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/2” collet.
  • Industrial quality control to ensure best performance.
Check Stock

Bosch PS22-02 12-volt Max Brushless Pocket Driver Kit with 2.0Ah Batteries, Charger and Case

  • POWER: Lightweight and compact at only 1.6 pounds, this tool features an EC brushless motor that provides 180 in.-lbs. of torque making it great for continuous overhead work..
  • LONGEVITY: The Bosch PS22-02 driver kit’s brushless motor and 2.0-Ah battery provides increased runtime for continuous work in high energy applications..
  • CONVENIENT: The tool’s 1/4-inch hex head allows for quick and easy bit changes and an interface for a belt clip or bit holder for portability and versatility..
  • PRECISION: The Bosch PS22-02 pocket driver has 20+1 clutchsettings and 2-speed gearbox offer precise torque adjustment for accurate and controlled screw driving..
  • DURABLE: The PS22-02 pocket driver kit is crafted with Bosch’s exclusive Durashield housing to take the toughest wear and tear.
Check Stock

BOSCH BH2770VCD 120-Volt 1-1/8 Hex Breaker Hammer Brute Turbo Deluxe Kit with Deluxe Cart , Blue

  • POWER: outstanding power, providing 43 ft.-lbs. of impact energy for a tool weighing just 63 pounds, perfect for the toughest applications including foundation work and pipe laying.
  • CONTROL: features Bosch’s Active Vibration Control, providing a longer air cushion in the hammer mechanism with an ergonomic shock-absorbing handle that allows for more control throughout the hammering job.
  • CONVENIENCE: includes Bosch’s Service Minder Brush System, shutting the hammer off for brush replacement or preventative maintenance so you can focus on the task at hand.
  • DURABILITY: grease packed gear box and hammer mechanism eliminates uncertainty of job site lubrication for long-term tool durability.
  • NEW MOTOR DESIGN: increased motor output power provides up to 30 percent more impact energy vs the Bosch BH2760.
Check Stock

SpeTool 1/4 Shank Carbide End Mill for Aluminum Cut (3 Flutes, 3.5 inch Long) Non-Ferrous Metal Upcut CNC Spiral Router Bit

  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 1-1/2 inch Cutting Length, 3-1/2 inch for Total Length.
  • The Route Bits With Flat Top, 3-Flute, Upcut For Easy Chip Removal And Perfect Surface Finish. Clockwise Motion for Machining..
  • For Aluminum 6061,7075 etc. Non-ferrous Metal, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
  • The Carbide EndMill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock