DONSP1986 Reinforced Bicycle Gas Frame with Gas Tank Built in, 2.4L Frame -Gas Motorized Bicycle (Black)
Gas Frame 2.4L Requirement on seatpost:27.2mm, Note: buyers need know how to fasten the motor on the pedestal mount of gas frame to prevent crack from vibration which maybe caused crack of frame.
Reinforced Black bicycle gas frame Built-in 2.4L gas tank Designed for the 2-cycle engines 48cc/66cc/80cc with 40 to 50mm wide front mount stud spacing.
Rear Disc brake bracket and front mount pedestal works well with gas motor front mount bolts 8mm.
Frame made especially heavy duty for gas engine applications Available with 135mm rear frame width for either single speed or multi-speed bikes..
38mm diameter downtube 70 degrees angle V frame, the width and Inner Diameter of the bottom bracket:68mmx50.8mm/2.677inx2in.
PLEASE NOTE 1: the best safe speed if racing: 35km/h；Head tube: 150mm.
This product Comes with 12months Warranty. Any questions,please contact us firstly! we can help you solve the problem until you are satisfied..
Gurmoir Back Door Aluminum Protective Housing Case for GoPro Hero 8 Black, Wire Connectable Metal Frame Side Open Video Cage with 52mm UV Filter for GoPro hero8, Rock Solid and Heat Dissipation
...Door for your Gopro's Safety】with aluminum alloy back door.your Gopro camera will be more safety during high-velocity sport or daily using. No more worries about your Gopro camera will falling out. you can just enjoy your shooting time..
【More Durable Than Plastic Case + Multifunctional Essential Metal Case with Bottom Hollow Design to Prevent Your Camera Overheating】Aluminum alloy CNC injection molded, make this aluminum case more durable than plastic one, and this case has bottom hollow design can also prevent your camera damaging or caused by overheating, it could mount with bicycles, hand rack, helmet, chest belt, or other kit etc... Kindly Note:The Aluminum Case have LOGO(Gurmoir for HERO 8) on it.
Dot Genie Easy Hanging Fire TV Cube Wall Mount (Fits 1st Gen and New 2nd Gen Fire TV Cube) | Updated for More Support | Totally Hides Cords | Improves Visibility | Quick Install
The Easy Mount flips your Fire TV Cube 1st Gen and NEW 2019 4K 2nd Gen streamer 90 degrees, so the top, with the lights, buttons and microphones are now pointing out into the room AND allows the wires to tuck neatly behind the TV..
When the microphones point out into the room they hear you better and are less prone to TV speaker interference..
The Easy Mount allows for the wires to come out the sides or bottom, meaning you can mount on any side of the TV for best placement (top, bottom, right, or left)..
No pre-drilling required. Our mount comes with “no drill” drywall anchors. All you need is a screwdriver..
BIRD FEEDER POLE MOUTING FLANGE: This flange will allow a 1" pole to fit through the center of it to mount a tray feeder somewhere on the middle of the pole, or it can be mounted to the bottom of a feeder and sit on the top of a 1" pole.
EASY INSTALL: Allows a 1" pole to fit through the center of it to mount a tray feeder, or it can be mounted to the bottom of a feeder and sit on the top of a 1" pole. Screws included and made of black powder-coated heavy gauge steel for lasting durability.
MADE IN THE USA: This product is proudly made in America and manufactured in our Wisconsin facility.
BIRDS CHOICE: We currently operate out of a 50,000 square feet manufacturing facility in Chilton, WI, employs 45 awesome team members, and remains committed to designing and creating the best darn products in our niches.
PRODUCT SPECIFICATIONS: Includes [1] Pole Mount Flange, [4] screws | Material: Powder coated heavy gauge steel| Measurements: 1 in..
Linen Avenue Cordless Cellular Light Filtering Shade, 35 W x 48 H, Crystal
Please read the following measuring and ordering instructions in the following bullet points. If you need additional assistance measuring or ordering your shades, please feel free to contact us..
INSIDE mount: measure your window horizontally with a steel tape measure in three places.
top, middle, and bottom, use the smallest measurement, round down to the nearest half inch available. Your shade will arrive with an ¼” deduction..
OUTSIDE mount: Measure your window horizontally with a steel tape measure in three places.
top, middle, and bottom. Using the LARGEST measurement, add 2 to 4 inches and order this width. You may want to add 2 to 4 inches to the height for overlap. Your shade will arrive with an ¼” deduction..
Your shade will arrive with a 1/4" deduction to ensure raising and lowering the shade in the window frame. Minimum depth required to install inside mount is 2 inches..
HARDWARE: End caps, simple snap-in top mount brackets, and mounting hardware is included. Headrail size: 1 5/8 High and 1 7/8 Deep (2 3/16” Deep with bracket)..
Linen Avenue shades and blinds are offered in a variety of styles to best suit your home or office. Linen Avenue offers styles with various levels of privacy and are all cordless. Please be sure to click on our....
✔Metal Extension Base Mount Plate Suitable for SONY ZV-1 --- Cold Shoe on the bottom of plate, can work with fill lights, microphone and other external accessories..
✔No Blocks on Button and Battery --- You can operate camera smoothly like without the plate. Several 1/4" Screw Holes on the bottom of plate, will not block if works with tripod and ect. Also the plate won't block camera Radio Hole..
✔Tiny but Multi-functional --- Tiny body but with huge function, has Cold Shoe Mount, several 1/4 Screw Hole, extension usage..
✔Support Vertical Shooting Mode --- 1/4 Screw Hole on the side of plate, can realize the vertical shooting with tripod..
✔Also we have bracket with added height on grip, please check with ASIN B08FHVXHV7..
Suuntok Microphone Shock Mount Mic Holder-Anti Vibration Spider Shockmount Compatible with Many Condenser Microphones Like AT2020 MXL770 MXL990 Samson G Track Pro Rode NT1-A Neumann U87-Black
This shock mount mic holder can isolate condenser mics from most physical vibration, floor, and stand noise effectively. And it’s ideal for....
One shock mount is equipped with 4 different bottom screws, which can compatible with multiple microphone styles, for instance, AT(2020, 2020 USB),....
The shock mount was totally made of Heavy-duty solid metal, except the elastic band and pad. It also came with mounting pads to protect the bottom of....
1. The shock mount is not compatible with handheld mic, such as SM58, Q2U, ATR2100. 2. It’s also not suitable for many USB microphone with function....
We promise to provide timely response within 24 hours and lifelong technical guidance..
Linen Avenue Cordless Cellular Light Filtering Shade, 22 1/2 W x 48 H, Crystal
Please read the following measuring and ordering instructions in the following bullet points. If you need additional assistance measuring or ordering your shades, please feel free to contact us..
INSIDE mount: measure your window horizontally with a steel tape measure in three places.
top, middle, and bottom, use the smallest measurement, round down to the nearest half inch available. Your shade will arrive with an ¼” deduction..
OUTSIDE mount: Measure your window horizontally with a steel tape measure in three places.
top, middle, and bottom. Using the LARGEST measurement, add 2 to 4 inches and order this width. You may want to add 2 to 4 inches to the height for overlap. Your shade will arrive with an ¼” deduction..
Your shade will arrive with a 1/4" deduction to ensure raising and lowering the shade in the window frame. Minimum depth required to install inside mount is 2 inches..
HARDWARE: End caps, simple snap-in top mount brackets, and mounting hardware is included. Headrail size: 1 5/8 High and 1 7/8 Deep (2 3/16” Deep with bracket)..
Linen Avenue shades and blinds are offered in a variety of styles to best suit your home or office. Linen Avenue offers styles with various levels of privacy and are all cordless. Please be sure to click on our....
