Best Bowden Extruder Nozzle Kit

PRUSA Original Prusa i3 MK3S+ Kit, (PRI-MK3S-KIT-ORG-PEI)

  • Dual Drive technology: This Bowden utilizes an internal gearing ratio of 3:1 together with precision cnc-machined hardened steel drive gears,which will minimize slippage and increase feeding strength..
  • Fastening Spring Device: Bowden extruder allows the user to fine-tune the tightness with screw nut to fit with the most filament, such as PLA/ABS/ PETG/ TPU/NYLON/CARBON FIBER/WOOD..
  • Reduction Gear Device: It can give out more torque,reduce the burden of the motor, extend the life of the motor..
  • For Ender 3 V2, Ender 3 Pro, Ender 3 Series, Ender 5 Pro, Ender 5 Plus, CR10 Series, Anycubic Mega S, Tevo Tornado, Wanhao D9, Anet A8 E10, Prusa I3 and DIY 3D Printer..
  • We recommend E-steps: 385. Any problem when you receive the order, CONTACT US FIRST please!.
Check Stock

32PCS Mk8 Nozzles 3D Printer Extruder Nozzles Hardened Steel Stainless Steel Brass High Temperature Pointed Wear Resistant Nozzle 0.4mm,Compatible with CR-10 Ender 3/ V2 Ender3 pro,Prusa i3

  • Value for money: 10 pieces stainless steel nozzles and 16 pieces brass nozzles,5 nozzle cleaning needles,1 Nozzle Spanner,possesses 0.2 mm,0.4....
  • High precision: the inner wall of the 3D printer extruder nozzle is smooth and has no burrs, its viscosity coefficient is small, and extruder nozzle....
  • Premium material: Our MK8 extruder nozzles are made of hardened stainless steel, harder than normal brass nozzles,hardened stainless steel material....
  • Good performance: this MK8 nozzle has impressive toughness and hardness, not only suitable for common 1.75 mm 3D printer filaments, but also can be....
  • Extensive Compatibility: Outer Thread M6,Input Diameter 1.75mm ,these high temperature pointed wear resistant nozzles are compatible with MK8 hotend....
Check Stock

CR-10S 3D Printers Original Replacement Parts/Accessories Full Assemble MK8 Extruder Hot End Kits with Nozzle 0.4mm /0.2mm /0.3mm /0.5mm fit for Creality 3D Printing Printer CR-10 CR-10S S4 S5

  • Creality CR10 Extruder,100% ORIGINAL CREALITY 3D PRINTING PRINTERS PARTS /ACCESSORIES AND WITH HIGH QUALITY.
  • MAIN MATERIAL OF CR10 EXTRUDER IS ALUMINUM ALLOTY /STANIESS STEEL/BRASS.
  • CREALITY CR10 EXTRUDER CAN WORK WITH DIFFERENT SIZE MK8 NOZZLE: 0.2MM 0.3MM 0.4MM 0.5MM 0.6MM 0.8MM 1.0MM NOZZLE.
  • MK8 CR10 EXTRUDER HOT END KITS,WHITE WIRE WAS TEMPERATURE THERMISTOR, BLACK WIRE WAS HEATING TUBE 12V 40W..
  • TIP OF NOZZLE, ALUMINUM HEATING BLOCK, THROAT PIPE (BUILT-IN TEFLON).
Check Stock

20PCS 0.4mm MK8 Nozzles 3D Printer Extruder Nozzles + 10PCS Stainless Steel Nozzle Cleaning Needles with 2PCS Wrenches and Tweezers for Makerbot Creality CR-10 Ender 3 5

  • Package Include: This 3D printer nozzle set come with 20pcs 0.4mm printer nozzles, 10pcs 0.35mm nozzle cleaning needles, 1pcs curved tweezers, 1pcs socket wrench and 1pcs flat wrench.
  • Cleaning Needles: The nozzle cleaning needles are very flexible and robust, easy to bend the needle into nozzle and will not break. Perfect to handle tough extruder hot end nozzle clogs.
  • Premium Material: Our MK8 extruder nozzles are made of high quality brass material. Heavy duty and durable to use for a long time. Easy to install and change.
  • Applicability and Compatibility: These MK8 extruder nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original.
Check Stock

People's Choice Beef Jerky - Old Fashioned - Original - Healthy, Sugar Free, Zero Carb, Gluten Free, Keto Friendly, High Protein Meat Snack - Dry Texture - 1 Pound, 16 oz - 1 Bag

  • [Create Home-cooked Snacks]: Enjoy your own protein-filled beef jerky snacks with the 7Penn Ground Beef Jerky Maker Press Kit.
  • This 15-inch meat extruder beef jerky slicer works with ground beef, turkey, venison and more.
  • Make on-the-go meaty strips and snacks for hikes and camping trips.
  • [Easy to Use]: Squeeze the slide-release trigger on the back of the jerky blaster to set and load up to 1.5-pounds (24oz) of mixed ground meat and jerky seasoning into the beef jerky tube.
  • Attach nozzles, then squeeze the trigger to make beef jerky sticks or strips.
  • [Built to Last]: Jerky stick maker deer jerky extruder has a thick, durable plastic meat chamber and a stainless steel trigger mechanism and push rod that withstands repeated use.
  • A whole pound of ground meat can fit in the aluminum 15-inch (38.1cm) tube of this dehydrator jerky tool.
  • [Choose Between 3 Nozzles]: Cone nozzle allows you to create perfectly round 1/2-inch (1.3cm) beef sticks while the flat head nozzle allows you to make 3/4-inch wide by 1/4-inch thick (1.9 x 0.6 cm) strips.
  • Dual flat head nozzle creates 2 meat strips at once.
  • [Easy to Clean]: Place the removable tube and nozzle into the dishwasher to clean.
  • Wipe down the steel push bar and shooter handle with a de-sanitizer rag.
Check Stock

eSUN Cleaning Filament 1.75mm, 3D Printer Cleaning Filament, Prevent Nozzles and Extruders Clogging, 100g Spool 3D Printing Filament for 3D Printers, Natural

  • 【Cleaning Filament】Environmentally Friendly and Non-toxic. Keep your 3D printer nozzle in good health, clean between different material and color changes to extend nozzle life..
  • 【Prevent from Clogging】Designed to adhere to any stray material left in the nozzle and remove it along with the cleaning filament. It can clean a variety of 3D printer materials..
  • 【Easy to Use】Wide Cleaning Temperature Range 160°C-300°C. Clean the nozzle and extruder of 3D printer regularly, ensure feed smoothly and constantly without clogging..
  • High Compatibility】Perfect for multiple material including PLA, ABS, PETG etc. 100g(0.22 lbs) 3D printer cleaning filament is vacuumed sealed and comes with desiccant.PLEASE NOTICE THAT CLEANING FILAMENT CANNOT PRINT AS NORMAL FILAMENT..
  • 【When to Use】Before and after printing, change matrial with different melt point, colors and properties for better extruder protection and printing effect.With a certain level of adhesive ability, adhesive accumulated residual filaments and take them out to clean the interior extruder..
Check Stock

PTFE Bowden Tube 1M 1PCS+ 6pcs KJH04-M6 Fittings + 6pcs JP4-01 Pneumatic Fittings with PTFE Tube Cutter for 3D Printer 1.75mm Filament

  • 3*1 Meter Original Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate....
  • 1* PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep....
  • 6 * JP4-01 and 6 * KJH 04-M6 bowden tube fitting to secure PTFE in extruder and hotend..
  • Easy to Install: the pneumatic fittings are PC4-M6 and the hotend fittings are PC4-M10, the upper part can be inserted outer diameter 4mm PTFE tube....
  • Compatibility: fit for 3D Printer 1.75mm Filament and other devices..
Check Stock

Redrex Ender 3 All Metal Bowden Extruder Tension Adjustable with Tube and Stiff Bed-Leveling Springs for Ender 3,Ender 5,CR10 Series 3D Printers

  • All Metal Extruder Replacement for Ender 3 Ender 5 CR10 Series:This durable aluminum extruder frame works more stable than plastic parts..
  • Adjustable Extrusion Spring Tension Design: The extrusion spring tension could be adjusted by tighten the screw..
  • Upgraded Stiff Bed Leveling Springs:It provides stronger tension and longer sevice life than the stock ones..
  • High Quality Bowden Tube :It was made of highly purified PTFE(Poly Tetra Fluoro Ethylene) material,it feeds the filament smoothly..
  • Recommend filament materials:PLA/ABS/Wood/Hips/Flexible/PTEG,40 Teeth drive gear feeds the 1.75mm filament very smoothy..
Check Stock

Creality Original 3D Printer Extruder Assembled MK8 Hot End Sprinkler Kit for Ender 3 / Ender 3 Pro with Aluminum Heating Block, 1.75mm, 0.4mm Nozzle

  • ENDER 3 EXTRUDER is 100% ORIGINAL CREALITY 3D PRINTINGE PRINTERS PARTS /ACCESSORIES AND WITH HIGH QUALITY, WE JUST CONFIRM IT WORKS WITH CREALITY ENDER 3 3D PRINTERS. OTHERS BRANDS WE DO NOT TEST IT..
  • 5 PIECES 0.4MM 3D PRINTERS NOZZLES AS GIFT..
  • ENDER 3 EXTRUDER HOT END CAN WORK WITH DIFFERENT SIZE MK8 NOZZLE: 0.2MM 0.3MM 0.4MM 0.5MM 0.6MM 0.8MM 1.0MM NOZZLE.
  • MK8 EXTRUDER HOT END KITS,WHITE WIRE WAS TEMPERATURE THERMISTOR, BLACK WIRE WAS HEATING TUBE 24V 40W.
  • TIP OF NOZZLE, ALUMINUM HEATING BLOCK, THROAT PIPE (BUILT-IN TEFLON).
Check Stock

Official Creality Ender 3 Max FDM 3D Printer with Meanwell Power Supply Silent Mainboard Carborundum Glass Platform Large Print Size 300 x 300 x 340mm

  • Meanwell Power Supply: The powerful 350W power supply can be adjusted to adapt the voltage from 100V to 240V. Safe to use, and powerful in heating up..
  • Silent Mainboard: Ender 3 Max adopt the German import TMC2208 chip driver. It is effective to reduce the motor noise and shake that brings a....
  • Carborundum Glass Platform: With its superiority in heat resistance and surface flatness, the Carborundum glass platform helps prints adhere better....
  • Dual Cooling Fans: The axial cooling fan continuously helps hotend heat dissipation. The double blower fans promote quick cooling on the extruded....
  • All Metal Extruder: All-metal Bowden extruder is powerful in filament feed-in..
Check Stock