NZXT Technologies NZXT FZ-140mm Red LED Cooling (RF-FZ140-R1)
DIMENSIONS 140 x 140 x 25 mm / VOLTAGE 12V DC / CURRENT 0.15A (rate) 0.30A (safety) / INPUT POWER 1.80W (rate) 3.60W (safety) / SPEED 1000+/-200 RPM /AIR FLOW 83.6 CFM.
AIR PRESSURE 0.81 mmH₂O / NOISE 24.5 dBA / BEARING Long Life Bearing / LIFE 40,000 Hours.
59.1 ~ 65 CFM (120MM) and 83.6 CFM (140mm) for extreme airflow / 13 fan Blades provide quiet operation of 26.8 dBA (120mm) and 24.54 dBA (140mm).
Long-life bearing provides better reliability and extends life span surpassing 2 year warranty.
Optimized for extreme airflow 120mm fan with minimal speeds of 1000+/- 20% RPM.
Low noise level of 24.54 dBA with exceptional airflow at 83.6 CFM.
Available in 5 LED vibrant colors: white, blue, orange, green, and red..
Air King ASLC50 Advantage Exhaust Bath Fan with Light, White Finish
Exhaust fan measures 7-3/8" x 7-5/8" x 5-7/8" with a 10-1/2" x 11" grill, and comes in 23-gauge galvanized metal with a white finish|Operates at 50 CFM at 3.0 sones, accommodating bathrooms and rooms from 45 to 60 sq. ft..
The Advantage Exhaust Fan Series with light features a stylish grill design that fits in with almost any decor. The high impact polycarbonate lens allows for easy relamping and the fan and light can be wired to operate separately..
Highlights:Bright 100 Watts maximum standard bulb (bulb not included)Easily installs using the included adjustable hanging brackets UL Listed for installation over a tub or shower on a GFCI circuit 4".
Plastic damper protects against back drafts and ensures quiet operation.|4" plastic damper helps with back drafts and provides quiet operation|.
Bath fan with light designed to bring style to your home|50-CFM blower at 3.0-sone for quiet operation|Exhaust capacity for rooms of approximately 45 to 60-square feet|Easily installation by using the included adjustable hanging brackets..
Chic and unobtrusive grill comes with polycarbonate light lens that makes for easy re-lamping, and can be used with 100-watt maximum type A19 medium base incandescent bulb (not included)|Can be installed in two easy ways: installatio....
iPower 4 Inch 154 CFM Inline Ventilation Fan with Variable Speed Controller and 4” Air Carbon Filter 8 Feet Ducting, Kits, Combo Set for Grow Tent
Fan Speed: 2700 RPM. Included a variable speed controller attached to the power cord. Moves air through your target location efficiently for optimal ventilation.
Dimensions: 4 inches Flange Ducting x 12 inches Length. 1050 + IAV Australian RC412 Activated Carbon. 50mm Carbon Layer of Thickness for Higher Absorption and Performance.
Ducting: 4 inches (Diameter) x 8 feet (Length) when fully extended. Temperature endurance range from 0 ~ 185°F. (-18℃ ~ 85℃). Two pairs of 4 inches metal clamps made from stainless steel. Flexible length for exhaust fan blower/inline fan.
Multi-Functional: This ventilation combo removes heat and eliminate the undesirable ill-smelling odors in the grow tent to solves air delivery problems without major system rework or expense.
Package Includes: 1 x 4 inches 154 CFM Inline Duct Ventilation Fan with Variable Speed Controller.
Durable&High-Efficiency UFO600 LED Grow Lights: IP55 Durable aluminums tructure used, latest plant light in high yielding LEDs technology, 560 Warm....
Grow Tent: Durable 600D oxford maylar outside and high-reflective waterproof diamond Mylar inside(enhance the reflective effect). Large heavy duty....
4" Ventilation Kit: 1.5” Layer Coal Based activated carbon used for the filter,inline fan has 190CFM high air flow, 4"φ 25FT ducting included with....
Growers’ Best Grow Tent Kit Choice.Durable quality&High Efficieny led light, easy setup grow tent with high CFM ventilation system, also hydroponics....
Package Includes Full Grow Tent Setup Kit with Eveything. LED full-spectrum grow light, indoor grow tent room box ,4”inline duct fan ,4”carbon....
GDSTIME 2 Pack 80mm x 25mm Dual Ball Bearings High Speed 4500RPM 12V DC Brushless Cooling Fan
【Wide Application】This 80mm high speed fan can be used for cooling / ventilation in CNC Controller Box, Car Audio Amplifier, Inverter, Power Supply, LED Grow Lights, Battery Box, Vivarium, etc..
【Direct Replacement】as a standard size 80x80x25mm fan, it can be used to replace old broken 80 mm fans found in various electronics and machinery.
【High Speed】This high rpm fan is designed to maximize airflow and suitable for noise tolerant environments.
Such as work shops, outdoor electric cabinets, truck, etc. max. 43.2 dBA @ 4500 RPM.
【Powerful Airflow】The fan moves a lot of air.
you can use this fan for cooling a device or increasing ventilation or airflow at a particular place. Airflow: 59 CFM.
【Dual-Ball Motors】The fan features a brushless motor.
precision dual-ball bearings have a lifespan of 50,000 hours and allows the fans to be laid flat or stand upright.
【Easy to Install】Fan size (edge to edge): 3.15 x 3.15 x 0.98 in. (80 x 80 x 25 mm).
Hole to Hole Distance: 2.82 x 2.82 in. (71.5 x 71.5 mm).
The fan can be used as both intake or exhaust fan inside your electronic enclosure or server chassis.
【XH 2.54mm 2 Pin Plug】It is a 2-pin connector fan with 11.8 in. enough long power wires.
MaxxAir High Velocity Industrial Belt Drive Barrel Fan. Heavy Duty Rolled Steel Housing (42 Inch Barrel Fan)
BELT DRIVE DRUM FAN: This 42 in. belt-drive fan from MaxxAir is a prudent choice for just about any industrial application. Where people and machines need to be kept cool in the factory, warehouse or other large area - or to keep animals comfortable, this fan takes care of it all..
HIGH VELOCITY FAN: It removes stale air and odors from the barn, gym, crossfit box, factory, or warehouse - look to this rugged, power-packed air circulator. It is a versatile workhorse that will provide years of dependable service..
2-SPEED PRO DRUM FAN: It is made of a rugged, 22-gauge steel powder-coated housing with a 2-speed, thermally protected 1/2 HP PSC motor. The belt drive creates an ultra-quiet operation with increased longevity..
HEAVY DUTY FAN WARRANTY: It has dual ball bearing drive with reinforced steel motor mounts, rust resistant powder-coated grilles and convenient handles for easy portability. With 19,000 CFM this high quality industrial fan blows away the competition..
PORTABLE BARREL FAN: The Ventamatic Pro Barrel Fan is an ideal fan for workshops, garages, warehouses, and anywhere people and machines need to be kept cool. This model offers a reliable,solution to all your sized ventilation requirements.
Matthews KC-BK Kaye 13\ Outdoor Wall Fan / Ceiling Fan with Wall Control, 3 Metal Blades with Safety Cage, Matte Black
Height 17.5" (from Wall / Ceiling to End of Fan Head).
FAN BLADES: 3 Matte Black Metal Blades (13" Span / 31° Blade Pitch) CFM: 1302.65 (High Speed).
FAN CONTROL: Decora-Style 3 Speed Wall Control (Part Number: ME-WC ) with 90° Oscillation from Control.
Optional Remote Control Part Number: AT-RC-AC-WALL (Sold Separately).
INSTALLATION: Includes Side-Mounted Wall Junction Box.
Not Recommended For Salt Water / Ocean Front Applications.
DETAILS: Constructed of Cast Aluminum, Heavy Stamped Steel with Matte Black Finish.
This Low Profile Wall or Ceiling Fan Can be Mounted in Any Small or Awkward Spaces or in Front of HVAC Ducts to Improve the Efficiency of the Heating, Ventilation or Air Conditioning.