FOUR UNCLES Oil Changer Vacuum Fluid Extractor Pneumatic/Manual 6.5 Liter with Pump Tank Remover and Brake Bleeding Hose Convenient Oil Change & Fluid Change Tool No Leaks No Overfills
【2 WAY USAGE】Pneumatic and manual mode to fit any condition. The pneumatic mode provides higher speed while manual mode requires no other equipment to work with..
【SPEEDY EXTRACTION】Fast extraction speed of 1.8L /min. The oil change pump extracts engine oil in a 4 cylinder car within 5 minutes at pneumatic mode..
【NO OIL LEFT】 Vacuum Fluid Extractor comes with 5 kinds of tubes with different diameter go into the bottom of oil pan. The fluid extractor can be used to remove fluids from engine oil to brake fluids. It has a 6.5L reservoir, 3.28 feet flex hose and 3 extra dipstick hoses to reach the very bottom of the reservoir and suck up every drop of oil..
【Easy to Use】With FOUR UNCLES oil extractor, you don’t have to get under the car anymore to do fluid changing and there is no mess to clean afterward. Just simply open the hook and insert tube to change engine oil..
【WORK FREELY】Not limited to places, change oil anytime, anywhere. Perfect for working on a car in the garage, also suitable for using outdoors on boats, truck, or lawn mowers..
Aocoom-QingCang 6.5 Liter Oil Changer Vacuum Transmission Fluid Extractor Pneumatic/Manual Fluid Evacuator with Pump Tank Remover and Brake Bleeding Hose Engine Oil Change & Fluid Change Tool
【2 USAGES】Pneumatic and manual mode to fit any condition. The pneumatic mode provides higher speed while manual mode requires no other equipment to work with..
【SPEEDY EXTRACTION】Fast extraction speed of 1.8L /min. The oil change pump extracts engine oil in a 4 cylinder car within 5 minutes at pneumatic mode..
【NO OIL LEFT】Vacuum Fluid Extractor comes with 4 kinds of tubes with different diameter go into the bottom of oil pan. The fluid extractor can be used to remove fluids from engine oil to brake fluids. It has a 6.5L reservoir, 1*3.5 ft flexible hose and 3 * 3.39ft extra dipstick hoses to reach the very bottom of the reservoir and suck up every drop of oil..
【EASY to USE】With oil extractor, you don’t have to get under the car anymore to do fluid changing and there is no mess to clean afterward. Just simply open the hook and insert tube to change engine oil..
【WORK FREELY】Not limited to places, change oil at any time. Perfect for working on a car in the garage, also suitable for using outdoors on boats, truck, or lawn mowers..
Brake Fluid Liquid Tester, Auto Brake Diagnostic Testing Tool, Hydraulic Fluid Liquid Oil Moisture Analyzer with 5 LED Indicators, Auto Brake Diagnostic Testing Tool for DOT3 DOT4 Brake Fluid
PROTECTS YOU & YOUR CAR : Check the health status of DOT3, DOT4 car brake fluid, Brake Fluid Tester Pen can be used as a digital brake fluid tester suitable for determining brake fluid quality. It will be safe for your driving.
EATY TO USE : Press the button , Insert the tester into reservoir for one second then the tester result will be correctly indicated by LEDs.Repress the button for power off..
5 LEDS : 5 LED display lights the percentage of moisture content in the brake fluid, as the test results are more accurate.
USEFULL : Supports DOT3 DOT4 DOT5 brake fluid ..
EASY TO CARRY : Small size ,you can take it in pocket , take 1 AAA 1.5V battery. automatic shutdown after about 15 seconds of inactivity.
Motive Products - 0107 Power Pressure Brake Bleeder for Ford and Asian Cars and Trucks
Motive Products Power Bleeder kits use pressurized brake fluid to force air and old fluid out of your brake lines.
Just pour clean fluid into the pressure tank, attach the Power Bleeder cap to your fluid reservoir, and pressurize the system using the built-in hand....
Heavy duty 2 quart pressure tank holds enough fluid to do complete flush and bleed.
Built-in hand pump (no other pressure source is needed).
Precision pressure gauge ensures safe and effective operation. Push cap down until it seats. Twist to seal.
BJTDLLX Complete Rear Axle Kit with Brake Assembly & Pillow Blocks for DIY Go Kart ATV Quad Buggy Mini Bike (No Chain)
【Material】The rear brake assembly kit of the kart is a high-performance aluminum cylinder with pre-installed brake fluid.
the brake disc is made of high-quality steel, which is durable and has a long service life..
【Rear Axle Kit】length is 740 mm/29 inches, disc size is 160 mm x 4 mm/6.3 inches x 0.16 inches, T8F 58T sprocket (without chain). This is a complete rear axle kit for karts..
【Rear Brake Caliper Assembly】with master cylinder and caliper, 61 inches/1550 mm brake hose length. This rear brake assembly should fit most pit bikes made in China..
【Wide Range of Applications】very suitable for DIY karting projects or reconstruction. Suitable for four-wheel ATV off-road karts. Suitable for many 50cc 70cc 90cc atv quad bikes, karts, such as atomik, motowork, DHZ, LEI, etc..
【Package Content】rear axle kit + brake assembly + a pair of pillows (without chain). (Package size: 30'' x 8'' x 3'', shipping weight: 12lb)..
HORUSDY 200cc Fluid Extractor, Oil Extractor/Oil Syringe, Fluid Syringe Pump Manual Suction Vacuum Fuel Car Transfer
Filling/Extracting Pump is designed to remove and fill brake fluid, anti-freeze, gear oil, power steering fluid and more..
The pump includes two a 7-Inch by 1/4-Inch (outer diameter) hose extension for deep reach and small diameter applications, locking cap on end of hose and a 7.5-Inch/19-Centimeter clear hose..
The hose attaches to quick-connect on the cylinder. Double seals for brake fluid and anti-freeze, assembled on the plunger..
Heavy-duty construction allows for strength and durability..
Motive Products - 0103 Brake System Power Bleeder for Chrysler/Dodge/Mopar
Motive Products Power Bleeder kits use pressurized brake fluid to force air and old fluid out of your brake lines.
Just pour clean fluid into the pressure tank, attach the Power Bleeder cap to your fluid reservoir, and pressurize the system using the built-in hand....
Features custom cap to fit most late model Chrysler and Dodge cars and trucks..
Also fits some after market reservoirs and master cylinders made by Strange Engineering and Wilwood that use two twist on caps..
Built-in heavy duty hand pump (no other pressure source is needed) and precision pressure gauge ensures safe and effective operation..
SWANLAKE 200cc Fluid Extractor, Extraction&Fill Pump,Fluid Syringe Pump Manual Suction Vacuum Fuel Car Transfer
Filling/Extracting Pump is designed to remove and fill brake fluid, anti-freeze, gear oil, power steering fluid and more..
The pump includes two a 7-Inch by 1/4-Inch (outer diameter) hose extension for deep reach and small diameter applications, locking cap on end of hose and a 7.5-Inch/19-Centimeter clear hose..
The hose attaches to quick-connect on the cylinder. Double seals for brake fluid and anti-freeze, assembled on the plunger..
Heavy-duty construction allows for strength and durability..
SWANLAKE Fluid Extractor, Extraction&Fill Pump,Fluid Syringe Pump Manual Suction Vacuum Fuel Car Transfer (500ML)
Filling/Extracting Pump is designed to remove and fill brake fluid, anti-freeze, gear oil, power steering fluid and more..
The pump includes two a 7-Inch by 1/4-Inch (outer diameter) hose extension for deep reach and small diameter applications, locking cap on end of hose and a 7.5-Inch/19-Centimeter clear hose..
The hose attaches to quick-connect on the cylinder. Double seals for brake fluid and anti-freeze, assembled on the plunger..
Heavy-duty construction allows for strength and durability..
