NEW WILWOOD GO KART BRAKE SET WITH CALIPER PADS MASTER CYLINDER & LINE KIT FOR 1/8 ROTORS GREAT FOR KARTING JR DRAGSTER ETC SOUTHWEST SPEED
...y 1.2 lbs. Comes with high friction brake pads..
Wilwood Go-Kart Master Cylinder with a 1/2" Bore 1/2" Bore Weighs only .55 lbs. This super lightweight aluminum master cylinder designed specifically for kart & jr. dragster racing applications incorporates an adjustable lever ratio with a remote mount clear fluid reservoir for easy monitoring The assembly comes ready to install and includes billet bracket, lock-wired drilled hardware, & fluid line fitting ..
5 Feet of -3 Nylon Brake Line 3/16" Nylon tubing 5' Should equip most karts with some left-over..
90 Degree Fitting for Caliper Depending on how everything is mounted, the line might run to the caliper at a bad angle for the straight fitting. This 90 degree fitting installs in place of the straight fitting in the caliper to allow smoother, neater plumbing with less chance of kinking 90 Degree compression hose end 1/8" NPT Female to -3 Nylon hose..
Orion Motor Tech Oil Extractor 6L Fluid Extractor Set with 3 Hoses 1.6gal Manual Oil Extraction Pump for Engine Oil Changes Fluid Extracting for Watercraft and Powersports Vehicles
6L FLUID EXTRACTOR: This 1.6 gallon vacuum oil extractor set by Orion Motor Tech produces strong suction with tight seals to extract a half quart of....
VERSATILE USE: Our fluid extractor pump's three 3'3" extension hoses offer 0.12", 0.16", and 0.24" widths to bleed brake fluid, drain motor and gear....
USER-FRIENDLY DESIGN: Our fluid bleeder's built-in scale and transparent hoses allow you to clearly track your progress and inspect oil and fluid....
QUALITY CONSTRUCTION: The polyethylene reservoir, silicone main hose, and vinyl hose extensions are all highly resistant to heat and chemical....
QUALITY ASSURANCE: Look to OMT for the finest craftsmanship and the most reliable products, rigorously tested to provide the highest-grade tools on....
Mityvac MV6830 Professional Pneumatic Air Operated One Person Brake and Clutch Bleeder; Bleeds up to 2 Quarts (1.9 Liters) Per Minute with Simple and Efficient Operation
The Mityvac MV6830 includes the following components: brake bleeder.
molded base with screws for bench mounting.
user manual (English/French/Spanish/German)..
Includes a swivel air inlet to prevent kinks in the air hose during movement and the automatic shutoff valve prevents overfilling..
1.9-quart (1.8 liter) fluid collection reservoir allows the operator to perform multiple bleeding jobs without emptying..
Bleeds at a rate of up to two quarts (1.9 liters) per minute for increased productivity and features a variable thumb throttle to maintain desired flow rate..
Reservoir and lid feature large, coarse threads to reduce cross threading, and the bench-mountable, molded base keeps the unit secure while removing or replacing the lid..
【Fitment】 This motorcycle clutch fluid reservoir is replacement for Honda VTR1000F 1998-2004, replacement for Honda RVT1000R 2000-2006, replacement for Honda CBR1000RR 2004-2007. Size: 15 x 40 x 42mm/0.59" x 1.57" x 1.65".
【Exquisite Workmanship】 Automotive replacement brake fluid reservoirs has rational construction and low profile design, enhance the look of the original bulky oil reservoir bottle. The clutch fluid reservoir adopts professional manufacturing process, with stable performance, high precision and good reliability.
【No Oil Leak】 The motorcycle clutch fluid reservoir is made of high quality plastic material, durable in use and no oil leak. Our product has strict quality control standards, through improved design and advanced production technology to provide you with high quality products.
【Easy to Install】 A good replacement part for motorcycle clutch fluid reservoir. With bracket, screw and O-rings, easy and convenient to install, can help you save a lot of complex processes and save time and effort. If you want to provide safer guarantees for your car, our clutch fluid reservoir will be your better choice and professional installation is recommended..
Quality Assurance---- As a professional seller, high quality products an....
FOUR UNCLES Oil Changer Vacuum Fluid Extractor Pneumatic/Manual 6.5 Liter with Pump Tank Remover and Brake Bleeding Hose Convenient Oil Change & Fluid Change Tool No Leaks No Overfills
【2 WAY USAGE】Pneumatic and manual mode to fit any condition. The pneumatic mode provides higher speed while manual mode requires no other equipment to work with..
【SPEEDY EXTRACTION】Fast extraction speed of 1.8L /min. The oil change pump extracts engine oil in a 4 cylinder car within 5 minutes at pneumatic mode..
【NO OIL LEFT】 Vacuum Fluid Extractor comes with 5 kinds of tubes with different diameter go into the bottom of oil pan. The fluid extractor can be used to remove fluids from engine oil to brake fluids. It has a 6.5L reservoir, 3.28 feet flex hose and 3 extra dipstick hoses to reach the very bottom of the reservoir and suck up every drop of oil..
【Easy to Use】With FOUR UNCLES oil extractor, you don’t have to get under the car anymore to do fluid changing and there is no mess to clean afterward. Just simply open the hook and insert tube to change engine oil..
【WORK FREELY】Not limited to places, change oil anytime, anywhere. Perfect for working on a car in the garage, also suitable for using outdoors on boats, truck, or lawn mowers..
Aocoom-QingCang 6.5 Liter Oil Changer Vacuum Transmission Fluid Extractor Pneumatic/Manual Fluid Evacuator with Pump Tank Remover and Brake Bleeding Hose Engine Oil Change & Fluid Change Tool
【2 USAGES】Pneumatic and manual mode to fit any condition. The pneumatic mode provides higher speed while manual mode requires no other equipment to work with..
【SPEEDY EXTRACTION】Fast extraction speed of 1.8L /min. The oil change pump extracts engine oil in a 4 cylinder car within 5 minutes at pneumatic mode..
【NO OIL LEFT】Vacuum Fluid Extractor comes with 4 kinds of tubes with different diameter go into the bottom of oil pan. The fluid extractor can be used to remove fluids from engine oil to brake fluids. It has a 6.5L reservoir, 1*3.5 ft flexible hose and 3 * 3.39ft extra dipstick hoses to reach the very bottom of the reservoir and suck up every drop of oil..
【EASY to USE】With oil extractor, you don’t have to get under the car anymore to do fluid changing and there is no mess to clean afterward. Just simply open the hook and insert tube to change engine oil..
【WORK FREELY】Not limited to places, change oil at any time. Perfect for working on a car in the garage, also suitable for using outdoors on boats, truck, or lawn mowers..
Brake Fluid Liquid Tester, Auto Brake Diagnostic Testing Tool, Hydraulic Fluid Liquid Oil Moisture Analyzer with 5 LED Indicators, Auto Brake Diagnostic Testing Tool for DOT3 DOT4 Brake Fluid
PROTECTS YOU & YOUR CAR : Check the health status of DOT3, DOT4 car brake fluid, Brake Fluid Tester Pen can be used as a digital brake fluid tester suitable for determining brake fluid quality. It will be safe for your driving.
EATY TO USE : Press the button , Insert the tester into reservoir for one second then the tester result will be correctly indicated by LEDs.Repress the button for power off..
5 LEDS : 5 LED display lights the percentage of moisture content in the brake fluid, as the test results are more accurate.
USEFULL : Supports DOT3 DOT4 DOT5 brake fluid ..
EASY TO CARRY : Small size ,you can take it in pocket , take 1 AAA 1.5V battery. automatic shutdown after about 15 seconds of inactivity.
SUPERIOR MATERIALS:The Syringe oil extractor pump made of high quality, solid, durable material, Built-in dual rubber pads, fit the piston closely to avoids leakage,Thicken wall enhances high strength and provides long service life..
Extra tubes and Different Capacity for Choice: Extra tubes make extra length for jobs in hard to reach places and won't have to worry about spillage during use. Different Size Brake fluid extractors provide best Choice on the Capacity:0.5Liter/1.5Liter.
Extraction and Infusion of Liquid: Simple syringe-type action using the manual fluid pump can dual-way extract and fill fluid by differential extractor dispenser quickly and easily. Ideal for emptying or filling up the master tank and other reservoirs, extracting brake fluid from the tank and adding new oil before flushing the brake fluid to the brake caliper..
Widely Application: Ideal for extracting or changing engine oils or lubricants in ATV's, boats, farm equipment, industrial gear boxes, motor vehicles, motor bikes, RV's, etc. Applicable to engine oil, gear oil, gearbox oil, including chemical resistant oils,brake fluid, diesel fuel, coolants, hydraulic systems and water, etc..
Brake Bleeder Kit Hand Vacuum Pump Brake Fluid Bleeder Kit with Pressure Gauge Brake Bleeder Adapters Reservoir Hoses for Brake Fluid Power Steering Handdeld Vacuum Pump Brake System Bleeding Tools
UNIVERSAL BLEEDING KIT: Orion Motor Tech's vacuum bleeder with an adapter set works with nearly any vehicle's system and lets you bleed your brakes,....
SUPERIOR DURABILITY: The easy-to-use brake bleeder pump is constructed from high-grade aluminum alloy for lightweight long-term use and is anodized....
HERMETIC SEALING: Our tubes are made from premium silicone for better resilience, heat resistance, and sealing performance than the competition.
WIDE APPLICATION: Not just for bleeding brakes, this brake bleeding kit also clears oil, power steering fluid, and other hydraulic systems.
1 YEAR WARRANTY: Orion Motor Tech backs this brake fluid bleeder kit with strong 1 year warranty and our usual friendly 24/7 customer service,....
