JMMRRR Automotive Brake Caliper Press Tool with 2 PCS Steel Plates Ratcheting Caliper Piston Tool with 360 Degree Swing Ratchet Red
【2 Groups Of Push Boards Wider Application】This brake caliper press tool has 2 sets spreading plates, the bigger ones more fit for some sextuplet pistons fixed calipers, smaller ones are suitable for disc brake system with twin and quad pistons fixed calipers, or single and twin pistons floating calipers, is designed to "push" the piston back, cannot twist and compress at the same time..
【360° Ratcheting Design】Adopts 360 degree ratchet design, it is easy to get into place and use from any direction, the ratchet is in the centre of the dual piston brake caliper compressor, both spreading plates need pressure to start the ratchet, to ensure correct alignment to prevent the piston from being misaligned and damaging the brake components..
【Brake Hook & Reversing Switch】Two caliper hooks to protect the brake fluid lines and calipers provides maximum protection for the brake fluid lines and the brake calipers, there is a small positive and negative regulation switch on the ratchet, you can flip it to realize the conversion of expand and retract spreading plates..
ENGINE CARBON DEPOSIT, SLUDGE, GRIME NON-CORROSIVE CLEANER MOTOR OIL ADDITIVE WITH TITANIUM OXIDE NANO PARTICLE TECHNOLOGY
ENGINE OIL CARBON CLEANER ADDITIVE REMOVE CARBON DEPOSIT INSIDE ENGINE CYLINDER BELOW PISTON RING, OTHER CARBON DEPOSIT CLEANER ONLY SPRAY AND CLLEAN COMBUSTION CHAMBER ON TOP OF PISTON RING..
NON-CORROSIVE FORMULA WILL NOT HARM ENGINE PARTS, SEAL, PACKING, PISTON RINGS, SAFELY REMOVE ENGINE CYLINDER CARBON DEPOSIT WITHOUT TAKING APART ENGINE.
USE ONE BOTTLE FOR 4 CYLINDER ENGINE, TWO BOTTLES FOR 6 TO 8 CYLINDER ENGINE.
FOR SEMI TRUCK DIESEL ENGINES, USE UP TO 8 BOTTLES FOR BEST CLEANING RESULT AND PROTECTION.
Office Chair Gas Lift Cylinder-Office Chair Replacement Parts, Heavy-Duty Gas Lift Cylinder Fits Most Chairs,Highest End Class 4 Hydraulic Pneumatic Piston,Universal Size
STANDARD SIZE OFFICE CHAIR CYLINDERS REPLACeMENT: This chair cylinder replacement will fit all office chair bases with 50mm(2 inches) standard centre hole. Ideal to replace hydraulic piston on 99% standard office chairs, task chairs, executive chairs, salon chairs and rolling stools on the market. SAVE MONEY - to fix your sinking office chair by replacing the chair gas cylinder instead of spending hundred bucks for a brand new computer chair. ( Please measure dimensions before purchasing ).
HEAVY DUTY CLASS 4 PISTON - STRONGEST ON THE MARKET: Our gas lift cylinder passed the top-level test of BIFMA and TUV certification, the highest End Class 4 chair piston on market, which are known as the most durable, longest lasting, and highest quality gas lift cylinders, they can lift up and down 120,000 times without fail and can be support up to 1000lbs..
4.7’’ PISTON STROKE FOR ADJUSTING CHAIR HEIGHT: This chair piston extends from 264mm to 385mm ( 10.39 - 15.15"), minimum length: 10.39 inches.
maximum length when fully extended: 15.15 inches, travel from the highest to the lowest point, replace your office chair gas cylinder and stop worrying about disturbing anyone, 360 degree rotation to all directions, freely lift and rotate your office chair....
OEMTOOLS 27111 Disc Brake Tool Set Front and Rear Brake Piston Tool 11 Adapters Included for Use with Most Cars Forces or Rotates Pistons into Calipers
DISC BRAKE CALIPER TOOL SET: This disc brake caliper tool kit assists in the replacement of brake pads on most 4 wheel disc brake vehicles.
WORKS WITH MOST CARS: Our OEM brake caliper tool set includes 11 adapters for use on most domestic and imported cars that require clockwise rotations,....
QUICKLY FIT BRAKE PADS: The brake piston caliper tool set forces the pistons straight back into the brake calipers and rotates the pistons back into....
HEAVY DUTY DISC BRAKE PISTON TOOL: These brake caliper kits are constructed from steel for long-lasting strength and durability.
CONVENIENT STORAGE: This front and rear brake caliper tool set comes in a sturdy plastic case for easy storage, organization, and portability, making....
HOSALI Office Chair Cylinder Replacement,Heavy-Duty Gas Lift Cylinder Fits Most Chairs,Highest End Class 4 Hydraulic Pneumatic Piston, Universal Size
UNIVERSAL SIZE THAT FITS MOST CHAIRS: This chair cylinder replacement will fit all office chair bases with 50mm(2 inches) standard centre hole. Ideal to replace gas lift cylinder on 99% standard office chairs, task chairs, executive chairs, salon chairs and rolling stools on the market. SAVE MONEY - to fix your sinking office chair by replacing the cylinder instead of spending hundred bucks for a brand new computer chair. ( Please measure dimensions before purchasing ).
HEAVY DUTY CLASS 4 PISTON - ANTI-EXPLOSION CYLINDER: Our office chair piston passed the top-level test of BIFMA and TUV certification by lifting up and down 120,000 times without fail, they built with high-quality solid steel that can support maximum weight up to 1000 lbs. The safety decompression structure design will be more secure than other gas lift cylinder you ever use..
5.5’’ PISTON STROKE FOR ADJUSTING CHAIR HEIGHT: This chair piston extends from 285mm to 425mm ( 11.22 - 16.7"), minimum length: 11.22 inches.
maximum length when fully extended: 16.7 inches, travel from the highest to the lowest point, replace your office chair gas cylinder and stop worrying about disturbing anyone, 360 degree rotation to all directions, freely lift and rotate your office chair smoot....
NOUJIU Mountain Bike Hydraulic Disc Brakes Set, Aluminum Alloy Lever Front 1000mm Rear 1700mm with PM/is Adapter, MTB Hydraulic Disc Brake kit fit XC Trail, E-Bike, Fat Bike
[Safety protection] The integrated hydraulic cylinder design ensures the sensitivity of the brake. It only needs to gently pull the brake lever to stop instantly, ensuring safe riding..
[No noise] Mountain hydraulic brakes are equipped with resin pads, which have super abrasion resistance and will not make any noise during braking..
[Dual Piston Brake] Bi-directional drive, increase the friction area to provide amazing power, the braking force is stable, and the rotor is prevented from being damaged..
[Easy installation] mountain hydraulic brake set is equipped with IS/PM universal mounting adapter, no need to assemble, it can be installed out of the box..
[Size]mountain bike hydraulic disc brake set The left side controls the front, the right side controls the rear, the front length is 1000mm, and the rear length is 1700mm. Default adaptation 160mm rotor..
BIGTUR Brake Caliper Press Tool, Car Ratcheting Brake Caliper Piston Spreader Press Tool with 2 pcs Steel Plates/2 pcs Hangers
Included: Brake piston calipers equipped with 2 large push plates and 2 brake caliper hooks.The larger plates are held in place by built-in strong magnets and cylindrical pins for quick installation and removal.Hooks can hang calipers, brake tubing, and other parts to facilitate inspection of other car parts while the brakes are being repaired..
Easy to use: Ratchet technology gives a full 360° swing so that the spreader may be placed at any position.The extended reversing lever allows for easy change from spreading to retracting. Fully retracted: 1.88”, Fully expanded: 3.03”.
High quality:Brake caliper compressor uses high strength spreading plates with 1/6" thickness steel, which is not easy to deform and is durable. The ergonomically designed reinforced handle is efficient, comfortable and non-slip..
Wide range of applications: Our professional brake caliper press is suitable for all disc brake caliper press ratchets. Suitable for most large trucks and commercial vehicles. Used for dual-piston and four-piston fixed calipers, and single-piston and double-piston floating calipers.The bigger ones more fit for some sextuplet pistons fixed calipers..
Professional after-sales team: All kits are provided with lifetime technical support and one-year limi....
Piston Kit Fits Husqvarna K760/K770 Concrete Saws 51mm Replaces Husqvarna Part # 506372403, 506372402 Two Day Standard Shipping to all 50 States
REPLACEMENT FOR OEM Part # 5HP-11631-00-A0, 4LS-11603-00-00.
REPLACEMENT FOR YAMAHA TTR 125 PISTON RINGS HEAD GASKET SET KIT TTR125 TTR-125 2000-2007.
THIS BRAND NEW AFTERMARKET PISTON KIT HAS BEEN INSPECTED FOR THE HIGHEST QUALITY & THE HIGHEST GRADE MATERIALS HAVE BEEN USED IN THE MANUFACTURE OF THIS KIT.
PURCHASE INCLUDES: STANDARD SIZE PISTON. PISTON RING KIT. PISTON PIN. CIRCLIPS. CYLINDER HEAD GASKET. CYLINDER BLOCK GASKET..
