Best Brass Check Valve

IBC Tote Fittings with Valve Tote Adapter 2.95' Coarse Thread Tote Ball Valve Heavy Duty Tote Tank Drain Ball Valve Connector for Water Liquid Container NPT DN50

  • S60X6 Coarse Thread – The IBC tank adapter has a brass tap and a detachable tap fitting, suitable for most ibc standard containers, where the support thread is s60x6 coarse thread. The diameter is 60mm (23.36in) and the spacing is 6mm (0.24in), please check carefully for any problems before purchasing.
  • High Quality Brass & NO Leaking – The IBC tote adapter is made of high quality brass, which is resistant to acid and alkali, more wear-resistant, and the faucet is not easy to damage. With sealing ring, it can effectively avoid water leakage. Easy switching, long life, 3rd generation in 2022.
  • Applicable Model – Entrance 60cm thick thread (conventional tonnage barrel DN40/50 ball valve butterfly valve outlet size). The outlet 6-point pipeline of the water tank adapter can be connected to conventional PPR, PVC, metal pipe valves, etc. Accepts standard 1/2″ (13mm) garden hose with snap-on hose fittings.
  • Replacement Ton Barrels Faucet – Replace the new water tank adapter in time to protect the life of your existing valve or for fine flow control. This is a good way to stop beating the knuckles on the tank cage and allows you to draw water off a tank with ease, the tap also acts as useful back up safety valve.
Check Stock

Maxsen Deck Mounted Type Commercial Kitchen Sink Faucet Pre Rinse with Add-On Spout for Food Service Commercial Kitchens Restaurant Hotel Application Tap MS-5801BDP

  • 【Heavy Duty Brass Faucet】Brass Compression Cartridges with spring check.
  • 【UPGRADE Spray Valve】Powerful Jet Spray, 1.42GPM (5.38LPM) Water Saving Spray Valve..
  • 【Easy Installation】 Built-in water sealing washer , no need to apply PTFE tape..
  • 【Commercial SINGLE HOLE Faucet】47'' (1193mm) in Height for Commercial or Home Kitchen.
  • 【12“ (305mm) Add on Spout 】304 Stainless steel spout and Pre-rinse sprayer. The faucet comes with a 12 inch long touch spout. With the high....
Check Stock

3/4\ Brass Electric Solenoid Valve,  110V Air Valve Normally Colsed for Water Air Gas Fuel Oil 2W-200-20

  • High quality 3/4inch Brass Electric Solenoid Valve: Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc.  .
  • Normally closed electric solenoid valve: 2 way solenoid valve,Model: 2W-200-20.
  •   3/4" NPT port,   Working temperature range: -5 ℃~80 ℃.
  •  Operating  Pressure: MIN.0kg/cm - MAX.10kg/com  .
  • This solenoid valve 110v was manufactured with a VITON seal,two-way inlet and outlet ports with standard female thread NPT connectionsm and heat and oil resistant Viton gasket.   .
  • Applicable Irrigation Controls (garden, Farm,etc.), Liquid Controls ( Pipeline, Artificial River Etc. and Air Controls ( Lab, Factory, Etc.) -3/4 inch Brass Electric Solenoid Valve Also known as110v solenoid valve,electric solenoid water valve,brass liquid solenoid valve. .
  • This valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, We will gladly replace it..
Check Stock

ABN Car Vacuum and Fuel Pump Tester Gauge Kit – Fuel Pump Pressure & Vacuum Carburetor Intake Manifold & Vacuum Test

  • ...GE: Heavy-duty 12.75” x 2.25” x 7.25” inch (32.4cm x 5.7cm x 18.4cm) plastic blow-molded carrying case with handle for easy transportation, safe storage, and quick organization.
  • PACKAGE CONTENTS: Package includes (1) vacuum pressure gauge, (1) 2-foot (61cm) long rubber hose – 13/64-inch ID 23/64-inch OD, (1) brass cone adapter, (1) plastic connector, (1) 1/4”x18 male to 1/8”-27 female brass adapter, (1) 1/8”-27 male to 7/32” barbed brass fitting adapter, (1) 1/8”-27 female to 3/8” male brass adapter, (1) T-type 7/32” barded brass fitting adapter, (1) carrying case, and (1) instruction manual for your convenience.
Check Stock

Toro 640 Series 90 Degree Turf Rotor with 40 Nozzle, 1"

  • 35 Years of Reliability Once the 640 Series sprinkler goes in the ground it stays there. With a stainless steel-encased nozzle assembly and gear drive design..
  • Check Valve Standard Prevents low head drainage puddling and soil erosion.
  • Durable stainless steel engineering plastic and brass construction for reliable performance in the most demanding environments.
  • Normally Open Valve-In-Head Body Allows individual head control - the only commercial grade Toro rotor available with this feature..
Check Stock

IBC Tote Fittings, IBC Tote Adapter, 1/2' IBC Tote Tank Adapter Winterizing with 2' Coarse Thread for 275-330 Gallon, Leakproof Garden Hose Faucet Connector Replace Valve Set with Brass Spigot

  • S60X6 Coarse Thread – The IBC tank adapter has a brass tap and a detachable tap fitting, suitable for most ibc standard containers, where the support thread is s60x6 coarse thread. The diameter is 60mm (23.36in) and the spacing is 6mm (0.24in), please check carefully for any problems before purchasing.
  • High Quality Brass & NO Leaking – The IBC tote adapter is made of high quality brass, which is resistant to acid and alkali, more wear-resistant, and the faucet is not easy to damage. With sealing ring, it can effectively avoid water leakage. Easy switching, long life, 3rd generation in 2022.
  • Applicable Model – Entrance 60cm thick thread (conventional tonnage barrel DN40/50 ball valve butterfly valve outlet size). The outlet 6-point pipeline of the water tank adapter can be connected to conventional PPR, PVC, metal pipe valves, etc. Accepts standard 1/2″ (13mm) garden hose with snap-on hose fittings.
  • Replacement Ton Barrels Faucet – Replace the new water tank adapter in time to protect the life of your existing valve or for fine flow control. This is a good way to stop beating the knuckles on the tank cage and allows you to draw water off a tank with ease, the tap also acts as useful back up safety valve.
Check Stock

Kohler Part GP876851 (4 PACK)

  • Includes valve body, pressure balance cartridge, rough-in guide and mud guard.
  • 1/2" Universal NPT & direct sweat inlets & outlets, with stops.
  • Service stops include integral check valves.
  • 5. 0 gpm (18. 9 l/min) maximum flow rate at 45 psi.
  • Single lever design cycles from off through cold to hot.
  • Provides temperature regulation and automatic anti-scald protection.
  • One piece cartridge design simplifies installation and maintenance.
  • Adjustable high temperature limit stop to control maximum water temperature.
  • Requires valve trim to complete installation (sold separately).
  • Forged De-zincification Resistant Brass body provides long term reliability and resistance to aggressive water conditions.
Check Stock

150 Pieces TR413 Rubber Snap in Tire Valve Stems Assortment Rubber Black Rubber Snap in Valve Stems Standard Length Replacement Tire Valve Stems for Car Tubeless Rim Holes Replacement

  • One Size Suits Most Cars: each valve stem for tubeless tires measures approx. 0.7 x 1.7 inches, simple for your storage and carry, practical and versatile to use, fitting most cars, lawn mowers, light trucks, small trailers, unicycles, motorcycles and other vehicles.
  • Serve You Long: made of brass and ozone resistant rubber, these snap in tire valve stems are resistant to breakage, deformation, and tear.
  • In addition, they are EPDM, ozone and leak tested, come with high temperature resistant brass spool, with fine reliability, serviceability and performance, able to be applied for a long time.
  • Enhance Safety: these tire valve stems are able to keep your tires inflated at a constant level of air pressure well, helpful to protect your tire from wear and make the car run smoothly, nice accessories for improving the safety of your driving, which can bring big convenience to you.
  • Large Amount to Replace: there are 150 pieces of TR413 valve stems in the package, abundant in quantity, sufficient for you to use, replace in your work and daily life, and you can share them with family members.
  • Please check the model and compatibility information carefully before ordering.
  • Effortless to Install and Disassemble: these black tubeless valve stems adopt snap in design, c....
Check Stock

Nipple, 2 X 6 In

  • Price For: Each Stem Type: Blowout Proof Seat Material: PTFE Standards: UL, CSA Body Material: Brass Ball Valve Basic Body Material: Brass Port: Full Ball Valve Product Group: Manual Valve Structure: 2-Piece Handle Material: Steel with Corrosion Resistant Plating Item: Ball Valve Body Style: Inline Ball Material: Chrome Plated Brass Handle Type: Lever.
  • Temp. Range: 0 Degrees to 400 Degrees F Stem Material: Brass Max. Pressure: 600 psi CWP Pipe Size: 1/2" Tube Size: 1/2" Connection Type: Sweat x Sweat Features: General Purpose Country of Origin (subject to change): China.
Check Stock

Portable Scuba Tanks,2.3L Scuba Diving Gear,DOT Certified Tanks,Underwater 30-45 Minutes Diving Tank,Bacup Air Tanks

  • ...auges, as well as pressure tubes,and added some configurations to enhance the diving experience.The total weight of D23-A diving package is 4.6kg. It can be carried directly for short distances, and can be transported in the car if traveling..
  • ★【Bottle top valve】: The main material of D23-A bottle top valve is brass chrome plating, using vacuum color plating process, to improve the anti-seawater corrosion performance, and more beautiful appearance. The bottle valve has a low pressure interface, which can be connected to BCD or life jacket for better applicability. The air inlet adopts high precision filter core, which can filter particles over 5 microns. The scuba tank is stamped with the DOT certification mark, you can always check..
  • ★【Pressure gauge and pressure tube】: D23-A scuba tank uses A more stable pressure tube, which is made of PVC and butadiol mixture material. It can bear A maximum pressure of 10MPa, and the internal pressure is only 0.8-1.2mpa in normal use. In order to make it easier to check the remaining air in the tank during the dive, we use an extended tube connection pressure gauge. You can fix the pressure gauge in the visual range to check at any time..
  • ★【Package content】:D23-A includ the following products:2.....
Check Stock