Best Brass Compression Stop Valve

Compression Sleeve Puller Tool Remove Nut & Ferrule Of Pipe 03943, Sleeve Remover For 1/2” Compression Fittings Only, Corroded & Frozen Supply Stops, Plumbing Tools Compression Ring Removal Tool

  • 【No Damage To Walls & Copper & Supply Lines】This compression sleeve puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This sleeve remover removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this sleeve remover tool and make your life easy. Precision machined plumbing tool..
  • 【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. This puller tool is easy to use in relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a nut and ferrule simple, and makes plumbing work simple..
  • 【Work On Corroded & Frozen】Fully machined body and screw, this ferrule puller is durable, corrosion resistant & wear resistant. Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe..
  • 【Easy & Fast Remove】1.Remove the ....
Check Stock

Symmons S-3500-CYL-B-TRM Dia Shower Valve Trim in Polished Chrome (Valve Not Included)

  • For use with pressure-balancing valve model S261XBODY, or for 3x faster installation, use Temptrol Rapid Install bracket model S261XBRBODY (valve not included).
  • Adjustable stop screw to limit handle turn.
Check Stock

KES Pressure Balance Shower Faucet Set Brass Shower Valve Anti-Scald Rough-in Concealed Valve Stainless Steel Trim Plate, Oil Rubbed Bronze, LB6700-ORB

  • BRASS VALVE: Faucet body is made from high quality brass, ensuring quality and longevity..
  • cUPC CERTIFIED & ANTI-SCALD: advanced pressure balance ceramic disc cartridge with cUPC certification can effectively protect you from scalding injury caused by sudden changes in hot or cold water pressure, maintaining consistent water temperature..
  • TEMPERATURE LIMIT STOP: If inlet water temperature changes seasonally, please following included instructions to readjust the temperature limit stop. Recommended water temperature for bath or shower is between 90°F - 110°F..
  • CONNECTION SIZE: 1/2'' NPT. Recommended installation height from floor: 100-150 cm..
  • TRIM AND HANDLE INCLUDED: KES shower faucet kit includes rough-in valve, faceplate, and faucet lever. Faceplate and handle are in industry-leading polished chrome finish (mirror-like), build to resist daily scratches and corrosions..
Check Stock

ADC Inflation Bulb, Standard 873

  • Leatherette carrying case with durable nylon zipper.
  • Assembled, inspected, and packaged in the U.S.A from foreign components.
  • Chrome-plated precision crafted 300mmHg no-pin stop manometer.
  • Latex-Free inflation bulb fitted with filter screen end valve to reduce dust build-up.
  • Adflow chrome-plated brass air release valve with filter screen.
Check Stock

YSTOOL 8PCS Engine Compression Tester Kit Automotive 300PSI Cylinder Pressure Test Gauge Tool Set for Auto Car Truck Motorcycle Gasoline Petrol Gas Engine Diagnostic with Red Case

  • This cylinder compression tester kit is a professional tool to test the compression in gasoline engine. The readings will help to diagnosis if there are valve sticking, carbon build-up, piston or cylinder head modified, cracked cylinder head or defective main gasket, poorly seated or worn piston rings, etc. Please note, a variation in compression readings between cylinders is often a better indication of engine problems than the absolute values of compression.
  • There are 4 sizes of brass adapters and 2PCS universal push-on connectors in the engine pressure tester kit. The 10mm 12mm 14mm 18mm adapters can be connected to the corresponding size cylinder head. The straight push-on connector and the curved one use rubber cone tip, can be pushed against on the cylinder head, universal for almost all the size cylinder head.
  • The engine cylinder compression test tool kit can be widely used for most type and depth spark plug well. If you have motorcycle car truck ATV mower and any other vehicles with gasoline or gas engine, and you are a professional on repairing vehicles, you can try this kit. Please note, this cylinder compression test gauge is not suitable for most diesel engine, because the range of the gauge is only 0-300PSI, which is much lower than most d....
Check Stock

MaxLine RapidAir M8040 1' In Line Ball Valve For 1 Inch Max Line Air Tubing

  • This is a Maxline Part Number M8040 - 1" in-line shut off ball valve for Rapidair MaxLine 1" tubing..
  • This is a solid brass valve that is nickel plated to resist corrosion..
  • This ball valve has a 175 PSI max working pressure and features a double o-ring sealed compression style fittings on each end specifically designed to be used only with the 1" MaxLine air system tubing..
Check Stock

Pronese 1 Pack Lead Free Brass Angle Needle Valve,Replacement Control Needle Valve 1/4\ OD Compression X 1/4\ NPT

  • ★【Material】Lead Free Brass.Which is corrosion resistance, no leaking, ductility at high Which make it much more healthy for human. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution..
  • ★【Application】Needle Valves are designed to regulate flow to an instrument or other industrial application. They are rugged enough for the oil & gas market, and suitable for most industrial applications.It can be used to open and close the propane. If you need a long time and stable control, it would be better to use with a regulator..
  • ★【Size】1/4" OD Compression x 1/4" NPT.This compression needle valve allows very fine control of water flow. It has 2 compression connections..
  • ★【Parameter】Working Pressure: Rated to 600 PSI. Temperatures range from -4 to 450 F..
  • ★【Package include】 1 PCS 1/4" OD* 1/4" NPT Needle Valve. It comes with 1 year warranty. Any problems just contact us to resolve..
Check Stock

Monster & Master Brass Angle Stop Valve Shut Off Quarter Turn Water Sink Bathroom Toilet Kitchen Shower Plumbing (1 PC-1/2'NOM In x3/8'COMP Out), MM-FV-003

  • Long-term flexibility: Based on the universal valve system, you can change the faucet style without replacing any water pipes in the future..
  • Ideal for residential and commercial applications. It is suitable for hot and cold-water supply with a water temperature of 40-165 degrees Fahrenheit..
  • It should be connected to the power of a faucet, toilet, Water dispenser or dishwasher during installation..
  • Size: Professional series right-angle rotary globe valve has 5/8-inch outer diameter compression inlet (1/2 inch nominal value) x 3/8 inch outer diameter compression outlet..
  • Contractor 1 pack. 1 / 4-turn ball valve style, solid lead free brass, durable and easy on/off operation..
Check Stock

DELTA FAUCET 441-WH-DST, 3.00 x 13.00 x 21.80 inches, White

  • Sleek design with the charm of simplicity.
  • DURAMOUNT Mounting w/ 2-1/2-Inch max deck thickness.
  • Flow Rate: 1.80 gpm @ 60 psi, 6.8 L/min @ 414 kPa, Fittings Type: 3/8" compression fittings, Supply Lines: Included InnoFlex Pex-C Supply Lines, Valve Type: DIAMOND Seal Valve.
Check Stock

Universal Polyethylene Tubing Ice Maker / Humidifier Installation Kit, ¼" X 25' Easy to Install,

  • Universal kit for most refrigerators and evaporative coolers.
  • ¼” x 25′ Polyethylene Tubing, Self-piercing tap valve and clamp, Plastic sleeve, compression nut and brass inserts.
  • Compression union for connecting polyethylene tubing ¼” water inlet at refrigerator, humidifier or cooler.
Check Stock