Best Brass Copper Fitting

Brass Pipe Fitting Coupling-1/2 x 1/2 NPT Female Chrome Plated Finish Brass Pipe Fitting Coupler with 1 Roll Copper Joint Thread Sealing Tape for Home Plumbing Pipes 1pcs-Chrome Plated

  • 【MATERIAL】Our brass pipe fitting coupling is made of premium solid brass with chrome plated finish.chrome plated brass for corrosion resistance,....
  • 【APPLICATION】Our brass pipe fitting coupling can apply to water, oil and fuel, LP and natural gas, and be used to connect various pipes as well as....
  • 【STANDARD】Our brass pipe fitting coupling meets specifications ASTM B584 and ASME/ANSI B16 for quality assurance..
  • 【FUNCTION】1/2" female x 1/2" female NPT threads equal diameter hex nipple for connecting two female threaded pipes with same diameters. Or....
  • 【SERVICE】Our QC department do 100% quality inspection on the brass pipe fitting coupling before delivery. We will do 100% refund if brass pipe....
Check Stock

TEMCo THA034 1 Conduit Punch and Die For Hydraulic Knock Out Driver 3/4 -16 Thread

  • Conduit Fitting Size: 1", Actual Hole Size: 1.33".
  • Fits Draw Stud Size: 3/4"-16 (TEMCo THA001).
  • Punching Thickness Capacity: 1/8" (11 ga) Steel, 1/16" Stainless Steel.
  • Made of Hardened Tool Steel with Black Oxide Finish. Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only, not for use....
Check Stock

SharkBite 3/4 Inch x 1/2 Inch Reducing Coupling, Pack of 12, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U058LF

  • SHARKBITE BRASS PUSH REDUCING COUPLING: This push-to-connect fitting allows you to make a connection between two different-sized pipes in any combination.
  • remove using a disconnect clip or disconnect tongs.
  • VERSATILE: Pushfit reducing connectors work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • large diameter fittings (1-1/4 in. to 2 in.) require a Stiffener when connecting to PEX pipe.
  • EASY TO INSTALL: The SharkBite brass reducing couplers allow for easy installation, with no tools, crimping, glue, or soldering required.
  • can be installed in wet lines and approved for underground and behind-the-wall applications with no access panels.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • SPECS: Made with DZR forged brass, this brass reducing coupling can withstand 200 degrees F and 200 PSI.
Check Stock

LIONMAX Barb Splicer Mender 4 PCS, Brass Barb Union Hose Fittings, 5/16 Inch to 5/16 Inch Barb Hose ID, with 8 Hose Clamps, for Air/Water/Fuel/Oil

  • 【SOLID BRASS MATERIAL】Barb fitting is made of brass. Strong and durable, not easy to rust and corrode. Has a long service life. NOTE: Brass barb hose fitting is not suitable for potable water..
  • 【-65~250°F 150PSI】Hose barb fitting has strong temperature resistance and good pressure resistance. So barb union splicer fitting is often used for water, fuel, oil delivery..
  • 【PACKAGE CONTAINS】5/16'' hose ID barb fitting (4 PCS) + 304 stainless steel hose clamp (8 PCS). You don't need to buy additional accessories..
  • 【TIGHT CONNECTION】5/16 inch ID hose barb fitting is smooth overall without burrs. Size meets the standard. The strong barb and hose clamps make the barbed hose splicer not easy to leak during the connection process..
  • 【WIDE APPLICATION】Brass barb hose fitting is suitable for pipe repair. Various hoses can be connected to 5/16'' hose ID hose barb fittings. Meet your multiple needs..
Check Stock

Brass Barb Union Fittings LIONMAX Barb Splicer Mender Hose Fittings 4 PCS 1/4 Inch to 1/4 Inch Barb Hose ID with 8 Hose Clamps for Air/Water/Fuel/Oil

  • 【SOLID BRASS MATERIAL】Barb fitting is made of brass. Strong and durable, not easy to rust and corrode. Has a long service life. NOTE: Brass barb hose fitting is not suitable for potable water..
  • 【-65~250°F 150PSI】Hose barb fitting has strong temperature resistance and good pressure resistance. So barb union splicer fitting is often used for water, fuel, oil delivery..
  • 【PACKAGE CONTAINS】1/4'' hose ID barb fitting (4 PCS) + 304 stainless steel hose clamp (8 PCS). You don't need to buy additional accessories..
  • 【TIGHT CONNECTION】1/4 inch ID hose barb fitting is smooth overall without burrs. Size meets the standard. The strong barb and hose clamps make the barbed hose splicer not easy to leak during the connection process..
  • 【WIDE APPLICATION】Brass barb hose fitting is suitable for pipe repair. Various hoses can be connected to 1/4'' hose ID hose barb fittings. Meet your multiple needs..
Check Stock

TEMCo THA005 3-1/2 Conduit Punch and Die For Hydraulic Knock Out Driver 3/4 -16 Thread

  • Conduit Fitting Size: 3-1/2", Actual Hole Size: 3.93".
  • Fits Draw Stud Size: 3/4"-16 (TEMCo THA001).
  • Punching Thickness Capacity: 1/8" (11 ga) Steel, 1/16" Stainless Steel.
  • Made of Hardened Tool Steel with Black Oxide Finish. Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only, not for use....
Check Stock

VE-FITS Bulkhead Union Brass Compression Tube Fittings 3/8 OD tube 1 piece

  • Bulkhead union mounts on a wall or bulkhead to allow connections on either side of barrier.
  • Fitting connects to tubing on either side of a bulkhead.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Hex nut construction for tighter, leak-free connections.
  • Compatible with stainless steel, copper, rigid and semi-rigid plastic tubing. Thread size: 9/16-24..
Check Stock

Gas Siphon Hose Pump Shaker Siphon for Gasoline Fuel Water Transfer Safe Multi-Purpose Self Priming Pump 6 Foot High Grade Hose 1/2' Valve

  • 【High Quality】This hand Transfer Siphon Pump is made of kitchen-grade anti-static PVC tubing which provides easy reach into containers, petrol resistant, avoid corrosion. It features a 2.5mm (1/10 inch) thick hose wall, a 6 foot long tube, and a high-quality brass fitting..
  • 【Multi-Use】This siphon hand pump is ideal for emergency gas transfer, it can transfer any liquids like gasoline, oil, diesel, water, beer and so on. A good tool at home for multiple usage. You never have to start the siphoning process with your mouth again, it’s extremely dangerous and grossly inefficient..
  • 【Safe Notice】This siphon pump for gasoline not for use on salt water or copper corroding chemicals. When you put fitting end into the container( you are siphoning from), must keep it inside of the container not just on the surface and the fluid you are trying to get rid of has to be up HIGHER than the bucket you are flowing into..
  • 【Easy to Use】The Siphon Pump is easy to use, No more sucking on tubes that can put you in contact with dangerous fumes and liquids – simply insert the brass valve into the container to be siphoned from, shake it in an up and down motion, and the liquid will begin to flow! To stop the flow, remove the fitting end from the liquid. Light....
Check Stock

Brass Barb Reducer Fittings LIONMAX 1 to 3/4 Barb Hose ID Hose Barb Splicer Mender with 4 Hose Clamps for Air/Water/Fuel 2 PCS

  • 【WITH HOSE CLAMPS】1'' to 3/4'' Hose barb reducer is suitable for connecting 1 inch ID hose to 3/4 inch ID hose. The package contains barb splicer reducer 2 PCS and 304 stainless steel hose clamp 4 PCS (size can adjust). You don't need to buy additional accessories..
  • 【-65~250°F 150PSI】Brass barb reducer fitting has strong temperature resistance and good pressure resistance. So barb hose reducer is often used for water, fuel, oil delivery..
  • 【SOLID BRASS MATERIAL】Barb splicer reducer is made of brass. Strong and durable, not easy to rust and corrode. Hose barb fitting has a long service life. NOTE: Brass barb reducer fitting is not suitable for potable water..
  • 【WIDE APPLICATION】Barb hose reducer is suitable for pipe repair. Various hoses can be connected to this 1 inch to 3/4 inch ID hose barb fitting. Meet your multiple needs..
  • 【TIGHT CONNECTION】This brass barb reducer is smooth overall without burrs. Size meets the standard. The strong barb and hose clamps make the barbed splicer reducer fitting not easy to leak during the connection process..
Check Stock

TEMCo THA032 1/2 Conduit Punch and Die For Hydraulic Knock Out Driver

  • Conduit Fitting Size: 1/2", Actual Hole Size: 0.86".
  • Fits Draw Stud Size: TEMCo THA012, THA013, THA015 or any draw stud with a diameter of 0.430" (10.90mm) NOTE: This die set DOES NOT have threads..
  • Punching Thickness Capacity: 1/8" (11 ga) Steel, 1/16" Stainless Steel.
  • Made of Hardened Tool Steel with Black Oxide Finish. Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only, not for use....
Check Stock