Best Brass Quick connect Fittings

JIFETOR 3 Way AC Manifold Gauge Set, HVAC Diagnostic Refrigerant Charging Tool for Auto Household R404A R134A Refrigerant, Quick Couplers Adapter Valve Core Tool (3FT Hose, Can Tap, Blue Case)

  • 3 3FT COLOR CODED HOSES: Refrigerant charging kit uses rubber nylon resin hoses, featured with anti-corrosion, low fluid resistance, high bearing pressure, ensure durability and good air sealing. Max working pressure is 500PSI and burst pressure is 2500PSI. Each side is loaded with 1/4″ female brass fittings for easy connection. Red hose connects red gauge side 1/4″ male flare to red quick coupler, blue to blue, and yellow hose connects AC gauge middle charging port to can tap or vacuum pump.
  • AC R134A QUICK COUPLERS: Premium brass and aluminum, quick interface design with accurate snap lock and anti-slip knurled grip ring, easy to connect and disconnect, compatible with all models with R134A service port. Connect the blue coupler to AC suction service port and the red one to AC discharge service port. Aim at service port, push to connect and lock. Pull up the knurled grip ring to loose and lift to disconnect.
  • ACCESSORIES AND CASE: R134A piercing-type can tap with 1/2″ female thread interface, can screw to fix on 1/2″ male thread of refrigerant bottle opening. T type knobs, easy to operate by fingertips. Internal pin with sharp tip help to pierce R134A bottle easily and quickly. Customized blow molding case keeps everything in plac....
Check Stock

iCrimp CRQ01 Disconnect Tong Sized 1/2 inch, 3/4 inch, 1 inch, Removal Tool used for Demount Brass Push Fit, Push-to-Connect Fittings

  • CRQ01 Push-Fit fitting disconnect tool has 3 teeth available in 1/2 in., 3/4 in. and 1 in. sizes, allows for easy removal of brass push-to-connect fitting from pipe.
  • CRQ01 disconnect tong is the easiest way to disconnect brass Push to Connect fittings in hard to reach places where it can be tough to get leverage on the release collar.
  • Compact design with wide grip handles. One-handed operation. Quick and easy disassembly.
  • To use the disconnect tong, slide the tong over the fitting and the pipe. Squeeze the tong to press the fittings collar and pull the pipe from the fitting. Easier to use in tight situations.
  • The disconnect tool depresses the release collar using the force applied by your hand to allow the teeth of the fitting to release and the fitting to be removed, reducing the risk of installation errors.
Check Stock

Mr. Heater F271803 12ft Big Buddy Hose with Regulator,Multi

  • Propane hose assembly for use only with Mr. Heater Big Buddy indoor/outdoor heater. Solid brass fittings.
  • POL connection connects directly to twenty pound propane tank. Hose material stretch tested to 400 psi.
  • Regulator reduces high pressure of 1.3 gallon tanks and larger to low pressure.
  • female connector fits any standard 3/8-inch male SAE fitting.
  • Quick Connect x Regulator with Acme Nut. 12-feet long.
Check Stock

SharkBite 1 Inch x 3/4 Inch MNPT Reducing Adapter, Pack of 6, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U142LF

  • SHARKBITE BRASS PUSH MALE REDUCING ADAPTER: This push-to-connect fitting allows you to make a transition between a pipe and an FNPT thread quickly and easily.
  • ideal for working in tight spaces **Remove using a disconnect clip or disconnect tongs**.
  • VERSATILE: Pushfit male reducing connectors work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • large diameter fittings (1-1/4 in. to 2 in.) require a Stiffener when connecting to PEX pipe.
  • EASY TO INSTALL: The innovative push-to-connect design of the SharkBite push male reducing adapters allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • approved for underground and behind-the-wall applications with no access panels.
  • SPECS: Made with DZR forged brass, this reducing adapter can withstand 200 degrees F and 200 PSI.
Check Stock

MENSI 1/8 FNPT x 1/4 Male Quick Connect Plug Propane Quick Disconnect Conversion Kit Adapter for Weber Q 100 1000 200 2000 1200 2200 Portable Gas Grill Camper

  • ❤The brass set includes two parts: 1/4" Propane Quick Connect With 1/8" Female Thread Adapter Fitting and one piece 1/8" Female NPT x 3/8" male....
  • ❤ The 3/8" male flare adapter can help you connect your RV extension hose if you have.
  • ❤High Quality Brass fitting and 100% Solid Brass, Two fittings help you save cost.
  • ❤ Suitable for Weber Camper grill model Q100, Q1000, Q200, Q2000, Q1200, Q2200.
  • ❤ Disconnect Design will help you hook up your 1/4" shut off control valve with RV easily.
Check Stock

mistcooling Patio Misting System - 160psi (12VDC-12 Nozzles Kit - W/Out Enclosure)

  • Features: Base 10 Nozzle Kit Includes: - 1- 160 PSI Misting Pump - 12 – Brass/Stainless Steel Misting Nozzles - 12 – Push to Connect Black Color Misting Tees - 1 – Push to Connect Misting Elbow - 1 – Calcium Inhibitor Filter - 30 - ¼ Inch Black Clamps - 50 Feet of Black Tubing - 6 Ft Feed Line.
  • Specs: - 160 PSI Mist Pump - 160psi Pump Quiet operation 35DB - self priming - max pressure 200psi pump - Available in 110 V, 220 V & 12 VDC - Thermal Safety Switch - Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps I DON’T THINK THIS BELONGS WITH THIS PUMP - Standard pump inlet: 3/8 inch push lock Fitting. - Standard Pump outlet: ¼ inch Push lock fitting..
  • Nozzles - Nickel-plated brass button series - With stainless-steel Orifice - Standard 10/24 inch thread - 0.012 inch Orifice - Rust-resistant fixed impeller pin - 0.014 GPM Flow per Nozzle.
  • Fittings - ¼ inch OD - Push to Connect Fittings - Easily Re-Usable - Black Color Fittings - 10/24 Thread Size - Leak Proof Fittings.
  • Tubing - ¼ inch OD Flexible PE Tubing - Max burst pressure is 300psi at 75°F - UV Resistant Flexible Tubing - Black Color - UV Treated. MC12020-MC12024.
Check Stock

DOZYANT 12 feet Low Pressure Propane Quick-Connect Hose RV Quick Connect Propane Hose Quick Disconnect Propane Hose Extension - 1/4” Safety Shutoff Valve & Male Full Flow Plug for RVs

  • Solid Brass Pre-installed Fittings on 12 feet Propane Hose Extension. Hose Assembly including a 1/4" Male Quick Disconnect Plug x 1/4" Female Quick....
  • Connects to Low-pressure Propane Supply on RV. Perfect for your RV Grill, Camper Grill and other BBQ Grills with a Quick Connect Propane Connection.
  • Use with Most Low-pressure Appliances. This DozyAnt hose can be used with most low pressure grills to RVs on-board propane supply with a quick connect....
  • Stop Lugging around that extra propane tank. Now you can connect your stove/BBQ Grills directly to your RV's propane. Female Quick Connect x Male....
  • Must-have if you're an RVer. Use with Olympian 5100,5500 grills most other low-pressure grills.
Check Stock

SharkBite 1-1/4 to 2 Inch PEX Crimp Tool, 24675

  • ...imp Tool Kit works with 4 sizes of PEX tubing - 3/8-in., 1/2-in., 3/4-in., 1-in. (The tool itself) and includes a Decrimping Tool (for crimp ring removal) -all in a compact and durable carrying case. Compatible with all types of PEX copper crimp rings and crimp style PEX fittings.
  • Compatibility:Copper crimp rings made to ASTM F1807 standard (Sioux Chief, Watts, Nibco and other brands).Brass or Poly(PPSU) crimp style PEX fittings (F1807/F877 or F2159 standards respectively).All types and brands of PEX tubing - Everhot, Viega, Nibco, Watts, Zurn, etc..
  • Users Manual Included: Contains information on how to make a crimp connection, check connections with Go-No-Go gauge and calibrate the tool.
  • Crimp Ring Removal Tool: Allows PEX fittings to be used more than once. It is designed to remove copper crimp rings with gentle action that will not damage fittings. The easy dial setting adjusts for crimp ring sizes. Compatible with brass and PPSU fittings.
  • Calibration & Inspection: Tool calibrations are made easy with adjustable lock screws. The Crimp/Clamp Tools must be checked for correct adjustment at....
Check Stock

POHIR Pressure Washer Adapter Set Quick Connect Kit,M22 14mm X 3/8 Male Plug Female Socket Brass Pressure Washer Quick Connect Fittings Quick Coupler for Pressure Washer Gun or Hose

  • ♛【Quick Connect Kit for Pressure Washer】:1 coupler M22 14mm female + 3/8 inch male plug, 1 coupler M22 14mm female + 3/8 inch female socket,....
  • ♛【Universal Pressure Washer Adapter】 : Fittings apply on universal gun, hose and pump connection. Use for most brands of pressure washeres.....
  • ♛【M22 to 3/8 Quick Connect】:2 pcs quick disconnect kit, can quickly connect & disconnect water outlet of pump to pressure washer hose or connect....
  • ♛【General Pressure Washer Adapter Accessories】:M22 14mm fitting 3/8 inch male plug female socket is compatible, M22 14mm female thread to M22....
  • ♛【Great Gift for Car Wash】:Quick disconnect plug high pressure brass fitting quick coupler, fits perfectly with power washer, pressure washer....
Check Stock

M MINGLE Garden Hose Quick Connect Fittings, 3/4 Inch GHT Solid Brass, Quick Connector Set, 2-Pack

  • High replacement water hose adapter provide secure and quick fittings, easy to connect and disconnect..
  • AMZ Tool is professional on Pressure Washer Accessory and always stand behind our products, please free to contact us if any questions..
  • Include 2 pair durable and leak-free water hose quick connector sets. Made of solid brass..
  • Standard 3/4 inch fitting. Quick connect garden hose end to faucet, sprayer nozzle or pressure washer pump. Fit any 3/4″ GHT (garden hose thread) watering equipment. Not Fit 1/2″ GHT, 7/16″ GHT(garden hose thread) watering equipment..
Check Stock