Best Brass Tubing Fitting

Anderson Metals-54014-05 Brass Tube Fitting, Short Flare Nut, 5/16\ Tube OD

Short flare nut for connecting to a tube or fitting.
Connects to copper, brass, aluminum, or steel tubing.
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Operating temperature range of -65 to +250 degrees F.
Resists mechanical pullout for a more secure connection.
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..

1/4" x 1/4" flared union for connecting and disconnecting two pipes more easily than couplings.
This fitting has a 45-degree flare connection on both ends..
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Operating temperatures range from -65 to 250 degrees F.
Suitable for copper, brass, aluminum, and steel tubing.

Suitable for the outer diameter of the pipe:3/8"..
Product Material: Brass. 3000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C).
Sleeve for a tube compression insert fitting.Connects to copper, brass, aluminum, or plastic tubing. No flaring tool required for assembly..
Commonly used to connect lines for air,water,fuel,oil and inert gases in a quick and simple way..
Package included: 40pcs Compression Insert. It is packed in plastic box to avoid product damage..

Suitable for the outer diameter of the pipe:5/16"..
Product Material: Brass. 3000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C).
Sleeve for a tube compression insert fitting.Connects to copper, brass, aluminum, or plastic tubing. No flaring tool required for assembly..
Commonly used to connect lines for air,water,fuel,oil and inert gases in a quick and simple way..
Package included: 40pcs Compression Insert. It is packed in plastic box to avoid product damage..

Hex plug with SAE 45-degree flare male end terminates tube size fitting.
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
For use with LP and natural gas, refrigeration, and hydraulic applications.
Used With: Copper, brass, aluminum and steel hydraulic tubing that can be flared..
Low cost and reusability, long or short nut. Good resistance to vibration..

2-In-1 Punch and Fitting Insert: The drip irrigation hole punch tool is designed to fit for drip tubing punch and 1/4 fitting insertion use.
Hold the handle of the drip irrigation tubing punch and clamp the tube, gently press it until the tube is pierced.
The hole size is 4 mm/ 0.12 inch to ensure the proper insertion of the connector, fitting and emitter, making the installation more closely fitting..
Quality Material: Punch tools are maded made of high-quality plastic and metal, strong and durable, and the puncher has been polished so it will not become dull And can be used for a long time..
Application: This 2-in-one drip irrigation tubing hole punch & fitting insertion tool can be used to puncture holes when installing drippers and micro-sprinklers in polyethylene tubing..
Easy to Use: Simply press the tool through the tubing and then remove the punch tool with a pre-punched hole left.
Insert the fitting into the tubing, then slide the tubing according to the slot and push the fitting into pre-cut hole..
Humanized Design: The smartly designed fitting insertion tool will make you feel untired even after using it for a long time.
It can help you drill easily and fast and save time and energy for you.
The combination of blue and black color makes the dr....

Material: 6061 anodized Aluminum for the manifold.
Brass material with Nickel plating for fitting and drain valve.
Working Pressure: 200 psi maximum working pressure.
Thread Size: 1/2 NPT threads at on the front, top and bottom of the manifold( 3 ports).
Kit includes: Aluminum manifold, Drain ball valve, 1/2 inch NPT straight fitting and PTFE Tape.
Installation: Easy installation and the tubing also can be removed if needed.