Best Briggs Choke Shaft

212CC Torque Converter Kit Go Kart 30 Series 6.5 HP Mini Bike Comet Clutch Set 3/4 Inch 10T #40/41/420 Chain Predator Driver Pulley Replacement Comet TAV2 Go-Kart Torque Converter

  • Package Included: 1 x 3/4″ Driver clutch bore, 1 x Overall Diameter 6″ (5/8″ driven pulley), 1 x 10 Tooth Sprocket for #40 #41 #420 Chain (Chain not included), 1 x Drive belt, 1 x Plastic Assy Cover, 1 x Full Mounting hardware Kit, 1 x Aluminum Mounting Bracket Plate. (As Pictures Shown).
  • Engine Compatability: 6.5 HP (212cc) OHV Horizontal Shaft Gas Engine. 3/4″shaft with flat key.
  • Comet 30 Series Torque Converter kit bolts on to most engines with a horizontal shaft including: Briggs, Clinton and clones, Kohler, Lifan, Robin, and Tecumseh motors.
  • Comet Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches. Engagement range is approximately 2350 RPM.
  • however, this can be adjusted from Minimum 1200 RPM – Maximum 3100 RPM by changing out springs (not included) and other adjustments.
  • Replace Part Number: Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A, 203814A 30-75.
Check Stock

Snapper HD 48V MAX Cordless Electric String Trimmer Kit with (1) 2.0 Battery and (1) Rapid Charger

  • Up to 30-minute run time on low with the Briggs & Stratton 48V MAX 2.0 Lithium-ion Battery. Kit includes 1 lithium-ion battery and 1 rapid charger.
  • 13-Inch cut width with .08 dual-line feed to trim large areas faster.
  • Bump feed advancement for easy line feed output.
  • Speed selection trigger with lock-out lever for easy operation.
  • 1-Inch aluminum shaft for added durability.
Check Stock

MOOSUN Minibike Go Kart Clutch 3/4" Bore 10 Tooth for #40/41/420 Chain

  • Compatible with 2-6.5hp Honda and Honda Cloned Engines GC160 GC190 GX120 GX140 GX160 GX200 Briggs and Stratton and 2-6.5 HP with 3/4" Shaft Tecumseh Engines.
  • Centrifugal Clutch 3/4" bore, 10 Tooth for 40,41,420 chain, Up to7HP engines. Common clutch for 2-7hp engines 2300±300 RPM.
  • 3/4" Bore Designed for 2-7Hp 212 Predator Engines Clutch Performance Parts.
  • 3 4 inch Centrifical Clutch for Single Wheel Belt Direct Drive Karts with Tires No Larger Than 15" Tall.
Check Stock

Pro Chaser EA175V EA190V Pressure Washer Carburetor for Subaru Robin EV190A Fits Honda XR2750 Troy-Bilt TB130 020344 Husqvarna HU700F 7021P HU800H HU700L Lawn Mower Replaces 16100-Z1A-801 802

  • Replaces Subaru Robin EA175V EA190V EV190A engine powered pressure washers. Please note that the carburetor in current listing has a different choke from the carburetor on Costco EA190V. If you are looking to replace a Costco EA190V carb, modifications will be required and you will need to swap in your original choke to make it work..
  • Replaces Honda 6 hp XR2750 Troy-Bilt TB130 020344 pressure washer. Replaces part #16100-Z1A-802 16100-Z1A-801.
  • Replaces Husqvarna HU700F 7021P HU800H HU700L Lawn Mower.
  • Buyers of Husqvarna HU700F, please note that the model we list doesn't come with the small shaft on top of the plastic choke piece as your current carburetor do. Modifications may be required for the carburetor to function properly as replacement. One of the most convenient adjustments you can make is swapping the plastic piece between your current carb and the one from us. You can easily lift the plastic piece from the top by removing the butterfly valve first (pull hard towards yourself).
  • Package comes with 1 x carburetor, 1 x fuel filter, 1 x spark plug, 1 x fuel hose, 2 x clamps, 1 x air filter set, 3 x gaskets.
Check Stock

YAMATIC 7/8\ Shaft Vertical Pressure Washer Pump, 2600-3000 PSI @ 2.5 GPM OEM & Replacement Pump for Power Washer Compatible with 308653052, 308653093, 308653009, 308653008, 308653006

  • ...er Supply Temperature: 104°F.Fits troy-built models and more models. Not fits all series. Please check the pump housing, pump shaft size, pressure power and the pump mounting size fit you pressure washer or not!.
  • 003e Fit Most Horizontal Pressure Washer Engine 196cc to 224cc : Such as some models of Honda, Generac, Briggs & Stratton, Craftsman, Karcher, Blackmax,Ryobi, Troy-Bilt, Craftsman. - BUT You should ask us previously if you are not sure this power pump would fit or not ! Not fit all series models, pls check the mounting size, pressure power and shaft size before you buy. Nothing is worse than having to return a product. Let’s work together to avoid this !.
  • 003e Pressure Washer Pump Parts Pre-filled with oil and ready to use - Comes with Easy start valve (EZ), Thermal relief valve (Made in USA), Chemical Injection & Unloader, Aluminum pump head, Key way stock.
  • 003e 100% Satisfaction Seller Service: EZJOB pressure washer pumps promise 48 Hours Pre-Sale and After-Sale Service. The mounting flange provides a convenient connection to most 3/4’’ diameter shaft. If you are not sure your high pressure washer could fit or not, please inform us your engine model, install size, and send us your former pump's pictures, or any after-sales problem....
Check Stock

LotFancy Go Kart Clutch 3/4 Bore 10T with #40 41 420 Chain, Centrifugal Clutch Fit for Go Kart Minibike MB165 & MB200, Up to 6.5HP, 1pc Connecting Link Included

  • LotFancy Go Kart Clutch 3/4 Bore 10T with #40 41 420 Chain, Centrifugal Clutch Fit for Go Kart Minibike MB165 & MB200, Up to 6.5HP, 1pc Connecting Link Included.
  • Perfect for Go Kart Minibike Baja Mini Bike MB165 and MB200, including Baja Heat, Mini Baja and the Baja Warrior.
  • Works with 2 – 6.5hp Honda Cloned Engines GC160, GC190, GX120, GX140, GX160, GX200. Briggs Stratton and 2-6.5 HP with 3/4″ Shaft. Tecumseh Engines 2-6.5 HP with 3/4″ Shaft.
  • Mounts onto crankshaft using bolt and washer on the end of the crankshaft.
  • Package included: 1 x Centrifugal Clutch, 1 x #40/41/420 Chain, 1 x Clutch Bolt, 1 x Washer Kit, 1 x wrench and 1 x Connecting Link.
Check Stock

Trkimal Centrifugal Go Kart Clutch 3/4' Bore 10 Tooth 10T Fit for #40/41/420 Chain 6.5HP - Upgrade Clutch Compatible with Predator GC160 GC190 GX120 GX140 GX160 GX200, Go Kart Fun Kart Mini Bike

  • 10Teeth 3/4" Shaft Bore Sprocket for 40/41/420 Chain 212cc Predator Engine Belt Drive Centrifugal Clutch.
  • Perfect Fit for Go Kart Minibike Baja Mini Bike MB165 & MB200 and Genrator.
  • The Clutch fit 2 - 6.5 HP 168 188 Gasoline Engines for go kart, Generator compartible with Cloned Engines GC160, GC190, GX120, GX140, GX160, GX200 Briggs & Stratton and 2 - 6.5 HP With 3/4" Shaft Tecumseh Engines.
  • For Motors No More Than 200 cc Only, Screws and Chain NOT Included..
Check Stock

Rampage Xt 1/5 Scale Gas Truck (Blue)

  • Powerful 2-stroke gas engine, Pull start, Large capacity fuel tank, Tuned Exhaust pipe, 4mm 6061 T6 Aluminum chassis, Aluminum body oil filled shocks, Front and rear gear differentials, Ball bearings throughout..
  • Easily tuned gas engine w/ choke, Tunable centrifugal clutch, Adjustable brake linkage, Adjustable ride height, Tunable suspension, Multiple shock locations, Adjustable toe angle, Adjustable camber..
  • Aggressive monster truck tires, Shaft driven durability, Enclosed battery box, Chrome tuned pipe, Engine enclosed in roll cage..
  • Powerful 30cc HY 2-Stroke Gas Engine, High torque throttle/brake servo, High torque 1/5 scale steering servo, 2.4GHz radio system..
Check Stock

Centrifugal Clutch, Go Kart Clutch 3/4 Bore 12T with #35 Chain for Go Kart Minibike Honda Engines GX160 GX200 GX140 GX120 GC160 GC190, With 2pcs Set Screws and 1pc Connecting link

  • ★ Centrifugal Clutch, Go Kart Clutch 3/4 Bore 12T with #35 Chain for 2-7 HP Engines, Engagement Speed 2300±300 RPM.
  • ★ Perfect for Go Kart, Minibike and Fun Kart.
  • ★ Fits Honda GX160, GX200, GX 140, GX120, GC160, GC190, Harbor Freight Greyhound 196cc, Harbor Freight Predator 212cc, Briggs and Stratton Tecumseh engines and 2-6.5 HP with 3/4” shaft.
  • ★ Fits any other engines with 3/4 crank shaft and 3/16” key way, most 5.5 HP clones, 6.5 HP clones and 4-7HP motors in all brands.
  • ★ Package included: 1 x Centrifugal Clutch, 1 x 4 Feet #35 Chain, 2 x Set Screws and 1 x Connecting Link.
Check Stock

HOOAI LMT 5-4993 Walbro Carburetor for Briggs & Stratton 799728 498027 499161 498231 494502 494392 495706 498134 496592 699318 699737 699856 699896-28V707 Carburetor

  • Carburetor for 4-Cycle Small Gas Engine Motor Lawn Tractor Mower Fits Various Briggs & Stratton Small Gas Engines: 282707, 283702, 283707, 284707, 284777, 285707, 286702, 286707, 288702, 288707, 289702, 289707, 28A702, 28A707, 28C702, 28C707, 28B702, 28B705, 28B706, 28B707, 28D702, 28D707, 28M706, 28M707, 28F707, 28R707, 28T707, & 28V707..
  • Carburetor for Craftsman 917256450 Lawn Tractor Engine Motors Briggs & Stratton Small Gas Engine..
  • HOOAI locates within the states, we provide carefree return, and 90 days money back guarrantee! Lifetime warranty against manufacturer defect!.
  • Carburetor for Coleman PowerMate Pro-Gen 5000 Watts Portable Electic Generator 5000W with Briggs & Stratton 9HP Engine 699318 699737 699856 699896 Centain 215000 Model Briggs & Stratton Engines..
  • Carburetor For Briggs & Stratton 799728 498027 499161 498231 494502 494392 495706 498134 496592, LMT 5-4993 For Briggs & Stratton, Walbro Engine Motor 734463213805DN..
Check Stock