Best Bright Led Tail Light

THRUNITE EDC Small Flashlight Archer Mini Max 405 Lumens USB-C Rechargeable Handheld Penlight Flashlights, NW

  • PREMIUM LED & MAX 405 LUMENS: Equipped with SST20 LED bulb,The Archer Mini produces an intense beam of bright light up to 87m and max 405 lumens..
  • LIGHTWEIGHT & SMALL: Archer Mini Flashlight with pocket clip is designed in perfect size, it fits comfortably in your pocket, backpack, the palm of your hand and only weights in 34g..
  • TACTICAL TAIL SWITCH: You could get the light momentarily on and change between three brightness modes through the anti-slip tail switch..
  • RECHARGEABLE BATTERY & LED INDICATOR: THRUNITE Archer Mini penlight is designed with rechargable battery, USB-C charging port and LED Indicator..
  • THREE LIGHTING MODES: The everyday carry flashlight supports Low / High / Strobe modes, Max run time 7.5 hours in low mode..
Check Stock

Partsam Waterproof 17" Inch High Power 40 LED Red Utility Trailer Truck RV Stop Tail Turn 3rd Brake Marker Identification Light Bar w/Chrome Bezel DOT Compliant (Pack of 2)

  • ...eces 17 Inch Thin LED Trailer tail Light Bar with Chrome Plastic Bezels, Red Lens. Nuts and bolts included for complete mounting and chrome covers dress it up very nice.
  • Each red led light bar has 2 rows of leds and is powered by 40 high power Super FLUX LED totally for a bright performance. Dimensions: 17.12"(L)*1.58"(W)*0.83"(H), hole to hole distance: 16" approx..
  • This led brake light strip has 3 wires coming out of the back that will connect to your existing trailer wiring: white wire is the ground, black wire is the tail light and red wire is the brake light/break light. Usually the turn signal light is the same as the brake light. It really depends on the application you are using it for.
  • This red light bar is universal for Semi Trucks, Trailers, motorhomes, Buses, Vans, Utility Trucks, Horse Trailers, Utility Trailers, Pick Up Trucks etc..
  • Installation is easy: drill a hole for the wiring to pass through, then added a thick circle of silicone caulking around the hole, again drill mounting holes and using the supplied bolts and nuts, just bolt them down. As the red led strip bar is ip 65 waterpr....
Check Stock

Partsam 2pcs 15' inch Clear Lens Red 11 LED Flange Mount Trailer Truck RV Stop Turn Signal Tail Lamps 3rd Third Brake Light Bar Warning Light ID Bar

  • Partsam ( 2 x Red in clear lens ) Super bright LED Surface Mount 15" light bar, completely sealed & waterproof..
  • Each light has 11 Super Diodes for a Bright Performance.
  • Polycarbonate lens is sonic welded to the housing. For use on heavy duty trucks, semi trailers, cargo trailers, boat trailers, work vehicles and a wide or narrow overland vehicle requiring quality DOT rated lighting..
  • Functions as marker, clearance light, identification light, ID bar, stop tail brake light, turn signal light, 3rd brake light for trailers trucks SUV camper and even on and Polaris RZR series as the customer feedback suggest, any application you can imagine..
  • HARDWIRED WITH THREE WIRES: White Wire - Ground.
  • Red Wire - high brightness as Stop/Brake light.
  • Black Wire - low brightness as tail/running light.
  • NOTE: the stop and tail light will not be functioned at the same time.
  • Light Size: Dimensions: 15.5" x 1.25" x 0.5".
Check Stock

Partsam 20 x 3/4" Round Led Light Trailer Boat Marker Clearance High Low 3SMD Clear Lens, 3/4" round LED combination turn signal running lamp fender lights 3-WIRE assembly Taillights(10Red+10Amber)

  • ...sed as both a turn signal AND a marker lamp(one function at a time). It can also be used as only a marker lamp (or only a turn signal) by using two wires and leaving the third wire unused.
  • 3/4" red led marker lights 3 wres in clear lens: Clear Lens Red Mini 3/4" Stop Turn Tail Lights 3 LED with Rubber Grommets,very bright for it's size. Dual brightness. install with a rubber mounting grommet and requires a cutout hole of 3/4" diameter. These 3/4" led lights come with 3 wires (white wire ground, black wire is tail light/marker light/clearance light/running light and red wire is for stop and turn functions). This light is DOT approved as your only tail light or turn signal.
  • These high quality LED lamps are DOT-approved for use on your vehicle. Includes pigtail harness and mounting grommet..
  • Warranty: We truly offer 1 year warranty! If have any questions or issues about our 3/4 led marker lights, Please feel free to us and we will reply in 24 hours.
Check Stock

Yorkim 1157 LED Bulbs white Super Bright, 1157 Brake Light Bulb, 9-30V 1157 2057 2357 7528 BAY15D LED Bulb with Projector Replacement for Back Up Reverse Lights or Tail Lights - White

  • 【ULTRA BRIGHT】 – Yorkim 1157 LED bulb is powered by 54 pcs 3014 & 4 pcs 3030 chipsets to offer 400% brighter lights than halogen bulbs for your vehicle.
  • 【SPECIFICATION】 - Note for Turn Signal LED Bulb** 50w 6ohm Load Resistor (ASIN:B07KS6KMYG) is needed to prevent hyper flash or error code. Head diameter 15mm, Length 39mm, Voltage 12v-24v, Extremely bright output 1600LM/Bulb.
  • 【FITMENT】 - 1157 BAY15D 2057 2357 7528, this 1157 led bulb is commonly used for Backup Reverse lights, Brake lights, Tail lights, Parking Lights, Daytime Running Lights or Turn Signal Lights.
  • 【EASY TO INSTALL】 - Non-polarity design, simply plug and play, built-in constant current IC driver for longer lifespan up to 50,000 hrs.
  • 【NOTE】 - Normally different LED bulbs are required for different parts of the same car (I.e. brake light, tail light, turn signal light, etc.). Although 1157 LED bulbs are most commonly used, they may not fit all parts of your car. Please check owner's manual to verify compatibility before purchase or send us a picture of your original bulb for our assistance on selecting the right product.
Check Stock

Yorkim Super Bright 1157 LED Bulbs Red, 1157 Brake Light Bulb, 9-30V 1157 2057 2357 7528 BAY15D LED Bulb with Projector Replacement for Back Up Reverse Lights or Tail Lights - Red

  • 【ULTRA BRIGHT】 – Yorkim 1157 LED bulb red is powered by 54 pcs 3014 & 4 pcs 3030 chipsets to offer 400% brighter lights than halogen bulbs for your vehicle.
  • 【SPECIFICATION】 - **Note for Turn Signal LED Bulb** 50w 6ohm Load Resistor (ASIN:B07KS6KMYG) is needed to prevent hyper flash or error code. Head diameter 15mm, Length 39mm, Voltage 12v-24v, Extremely bright output 1600LM/Bulb.
  • 【FITMENT】 - 1157 BAY15D 2057 2357 7528, this 1157 led bulb red is commonly used for Backup Reverse lights, Brake lights, Tail lights, Parking Lights, Daytime Running Lights or Turn Signal Lights.
  • 【EASY TO INSTALL】 - Non-polarity design, simply plug and play, built-in constant current IC driver for longer lifespan up to 50,000 hrs.
  • 【NOTE】 - Normally different LED bulbs are required for different parts of the same car (I.e. brake light, tail light, turn signal light, etc.). Although 1157 LED bulbs are most commonly used, they may not fit all parts of your car. Please check owner's manual to verify compatibility before purchase or send us a picture of your original bulb for our assistance on selecting the right product.
Check Stock

Partsam Pair 4D Jee p LED Tail Lights Assembly DOT Approved, Compatible with Wrangler JK JKU 2007-2018, High Intensity Rear Tail lights w/Parking Light, Brake Turn Signal Reverse Light (Clear Lens)

  • Quality Construction: Manufactured to exacting specifications with the upgrade materials, 2 jk Jeep Wrangler LED Tail Lights feature rugged, black polycarbonate housing with 4D clear acrylic lens, more spot for safer vehicle, safer driving, durable to use. Super bright Brand LEDs have an 70000h average life span, well weather-sealed to prevent dirt and moisture harming the sound condition of the art electronics founded inside, perfectly suited for automotive vehicles..
  • Three Light Modes: Daytime Running Lights, Brake Turn Signal Lamp and Reverse Light Function. The LED taillights for JK improves Luminance to the Back of Your JK, build-in transducer prevent light flicking..
  • Easy installation to be a direct Plug and Play replacement for your JK's original factory tail lights. Built-in Resistor, No extra Load Resistors needed. Installation can be completed within 30 minutes with basic hand tools..
  • Apply to: This pair of LED Tail Lights specifically designed to used on 2007-2018 Jeep Wrangler JK models, including Rubicon and Unlimited. Driver side and passenger side both included. Note: The taillight has a female plug for U.S. models. (Please confirm a male or female plug your car requires).
  • Warranty: Package included: 1pcs Driver-Side Tail Light & 1pcs Pass....
Check Stock

Nilight 2PCS 16Inch 11 LED Red Trailer Light Bar for Park Stop Turn signals Tail Brake Light DOT Compliant IP65 Waterproof Truck Trailer Marker ID Bar, 2 Years Warranty

  • High Visibility LEDs: Each oval led tail lights uses 24 high quality SMD LEDs to emit ultra-bright red light, offering two brightness levels. High for brake lights and low for Running Light. Individual diodes feature a circular pearl-like reflector for clearer light, improved visibility and a safer night for you..
  • Easy Installation: Standard 6" size. Black wire for Negative, White wire for Brake Light and Red wire for Tail/Running Light. Mark and drill holes according to the size of the base provided, and fix the trailer lighting with screws after connecting the wires. The mounting hole size is: 7” (175 mm) x 2.7” (68 mm).
  • Premium Material: This oval trailer lights is made of high-quality ABS shell and PC lens to ensure long-lasting durability. Compared with other household rubber installations, we use screws to install more sturdy, effectively protecting the entire led trailer tail lights. Anti-vibration and dust-proof not easy to fall off..
  • Waterproof & Durable: IP67 waterproof trailer tail light, capable to withstand the invasion and corrosion of sand, dust, dirt, water, snow and other impact of inclement weather, provides long-term durability for your vehicles..
  • Multi Functional Trailer Light: 6 led trailer brake lights Suitable for most vehicles....
Check Stock

60 Inch 2-Row Tailgate Light Bar, LED Tail Lights(Turn Signal, Running, Brake, Reverse Backup) - Waterproof 5 Fcunction led Brake Light Strip with 4 Way Flat Y-Splitter Light Bars for Trucks Pickup

  • WATERPROOF: Light bar strip is made of flexible silicone in IP 67 waterproof rate. LED tail light strip can work in bad weather or snow. The lifespan of tailgate strip is over 30,000 hours..
  • SUPER BRIGHT: Truck tailgate light has 2 rows total 180 LEDS. 60 inch trailer LED tail lights much brighter than Single-row..
  • MULTI-FUNCTIONS:The red lights of tailgate strip work as brake lights and running lights. Left red light work as left turn signal. Right red light work as right turn signal. All white lights work as reverse light..
  • EASY TO INSTALL: 60 inch tailgate brake light strip with a 4 Way Flat Y-Splitter. Super flexible and durable with high quality self-adhesive tape.LED tailgate light bar is suitable for many Cars, Trucks, Pickup, Trailers, Ford, Chevy, GMC and Toyota so on..
  • SAFETY DESIGN: Light bars for trucks also named car tail light strip, has low power consumption protecting car circuits and over temperature protection.If you have any issue about the light strip, please feel free contact us here.We are always here to solve well for you..
Check Stock

12V Trailer Led Light Kit, 2x Square Led Stop Turn Tail Brake License Plate Running Lights w/ 25ft Wiring Harness/6x Mini Marker Lights/15' 11LED Trailer Tail Brake Light Bar/License Plate Bracket

  • This 12v led trailer lights kit includes 2Pcs square rear combination tail lights, 6Pcs Mini Oval side fender marker lights (2Red+4Amber), 1Pc 15.5 Inch Trailer 3rd brake identification tail light bar, 25ft wiring harness with 4-flat plug(long enough to reach end of trailer), license plate bracket, mounting hardware. This trailer led light kit has everything you need to upgrade your trailers at once.
  • This boat trailer lights led submersible kit has multi functions: stop light, brake light, turn signal light, tail light, running light, rear reflex reflector, side marker light, side clearance lights, side reflex reflector, license plate illuminator, clearance Light, third 3rd brake light bar.
  • Wiring Tips: white wire is ground, yellow wire is high brightness for brake Light and brown is low brightness as Running Light/Left License Plate illuminator(Square tail Lights).
  • white is ground, red is high Brightness for brake/stop/turn light, black is low brightness as running Light(15.5″ led trailer light bar).
  • white is ground andblack is positive(mini side marker lights).
  • Brightness: Square LED trailer light has 15 Diodes (12 Red+3 Red) as stop, turn, tail, side marker, side reflex, and rear reflex functions and on left side Built-in license plate light(3 w....
Check Stock