Best Bulkhead Couplers

Renator P72-02330G Brass Spigot for Rain Barrel. Lead-Free Compliant, 3/4" Quarter Turn Ball Valve w/ Bulkhead Fitting, Thread Tape, and Polyester Wire

  • ...e a strong water flow by relying on pressure from the water in your rain barrel. The 3/4" spigot is threaded for easy use with a hose- no need to haul buckets or watering cans..
  • NO LEAKS. The attached washer and silicone tape provide a perfect waterproof seal, and the bulkhead fitting and spigot are reverse-threaded, and self tighten- which ensures the spigot will not accidentally loosen from use, and will hold a tight seal over multiple seasons..
  • INSTALLATION SO QUICK, YOU'LL BARELY HAVE TIME TO GET YOUR DRILL OUT. The bulkhead fitting and spigot are reverse-threaded, and are tightened from the outside of the barrel- no need to fiddle inside with a wrench. Simply drill a hole, and thread the attached wire down through the hole then slide the bulkhead fitting down the wire as a guide- works well for barrels with and without open top design. The product also comes with a detailed, illustrated guide..
  • HEAVY-DUTY, DURABLE CONSTRUCTION. From using a brass ball valve and body and aluminum handle (with orange paint spray), this spigot is built for longevity. The spigot also contains less than 0.25% lead, compliant with ....
Check Stock

KINGDEE INC DVI Coupler Female to Female Gender Changer Bulkhead Mount Adapter Black Gold Plated 5 Pack

  • Coupling of two DVI devices through a bulkhead.
  • Can be used as a coupler or a bulkhead mount adapter.
  • Gold plated contact pins to minimize signal loss.
  • Wired straight through for feed-thru applications.
  • Ultra Slim size moulded plastic construction.
Check Stock

Hilangsan 1.5\ Tri Clamp Weldless Bulkhead Stainless Steel Compression Bulkhead Fittings Homebrew Kettle Bulkhead 1.5 inch TC Bulkhead for Brew Kettle

  • 【Welding-Free Design】Only need to drill a 41 mm hole in the kettle, then the 1.5" TC bulkhead can be installed on the most brew kettle without welding. Add a TC port to your brew kettle easily..
  • 【304 Stainless Steel】The 1.5 inch bulkhead fitting is made of 304 stainless steel, anti-rust, high-temperature resistance, high-pressure resistance. The Polishing treatment makes the surface look more refined..
  • 【Food Grade O-Ring】A high-temperature resistant silicone O-ring is included. The O-ring has the perfect thickness and density to properly seal on the curved face of a brew kettle without leaking..
  • 【Applicable Size】This bulkhead compression fitting is suitable for 1.5 inch triple clamp. It is suitable for coke kegs, soda kegs, beer kegs, kettles, etc. as small as 12 inches in diameter..
  • 【Quality Service】We are committed to providing you with high-quality and reliable products. If you have any questions, you can tell us at any time. We will definitely solve it for you!.
Check Stock

BronaGrand 10pcs Plastic Standard Couplers Pipe Tip Coupler Cake Decorating Couplers for Icing Nozzles,White

  • 【STANDARD COUPLERS SIZE】:These white couplers length is 3 cm/ 1.2 inches, diameter is 2.5 cm/ 1 inch at the base.fit for standard-size icing....
  • 【STURDY MATERIAL】:Cake decorating couplers are made of sturdy plastic,Non-toxic, tasteless, food-safe materials, durable and reusable..
  • 【EASY TO USE】:Cut a tiny hole in the bag corner, insert the coupler, then attach the tip and screw on the ring, after done, remove the tip and....
  • 【USABLE RANGE】:Standard coupler fits all decorating bags and standard tips, help you swap piping tips without unnecessarily wasting bags or....
  • 【PACKAGE QUANTITY】:Included 10 pieces pipe tip couplers,enough for your different usages..
Check Stock

(2 pack)Hilangsan 1.5\ Tri Clamp Weldless Bulkhead Stainless Steel Compression Bulkhead Fittings Homebrew Kettle Bulkhead 1.5 inch TC Bulkhead for Brew Kettle

  • 【304 Stainless Steel】The 1.5 inch bulkhead fitting is made of 304 stainless steel, anti-rust, high-temperature resistance, high-pressure resistance. The Polishing treatment makes the surface look more refined..
  • 【Welding-Free Design】Only need to drill a 41 mm hole in the kettle, then the 1.5〃TC bulkhead can be installed on the most brew kettle without welding. Add a TC port to your brew kettle easily..
  • 【Food Grade O-Ring】A high-temperature resistant silicone O-ring is included. The O-ring has the perfect thickness and density to properly seal on the curved face of a brew kettle without leaking..
  • 【Applicable Size】This bulkhead compression fitting is suitable for 1.5 inch tri clamp. It is suitable for coke kegs, soda kegs, beer kegs, kettles, etc. as small as 12 inches in diameter..
  • 【Quality Service】We are committed to providing you with high-quality and reliable products. If you have any questions, you can tell us at any time. We will definitely solve it for you!.
Check Stock

Teemico 24 Pack Plastic Standard Couplers Cake Decorating Coupler Pipe Tip Coupler for Icing Nozzles

  • Standard couplers: these white couplers are 3 cm/ 1.2 inch long, and their base' diameters are 2.5 cm/ 1 inch, fit for standard-size icing nozzles.
  • The standard coupler fits all decorating bags and standard-size tips, helps you change piping tips without unnecessarily wasting bags or frosting.
  • Simple to use: cut a tiny hole in the bag corner, insert this plastic coupler, then attach the tip and screw on the ring, after done, remove the tip....
  • Durable and practical: the pipe tip couplers are made of quality plastic, with sturdy construction, make you decorate cake and cookie conveniently and....
  • Package includes cake decorating couplers, enough for different usages, you can change similar sized tubes without emptying the contents of the....
Check Stock

TAISHER 4-Way Straight Air Manifold 5 Ports Aluminum Industrial Pneumatic Air Compressor Quick Connect Socket In Line Type Air Hose Splitter with 4 Couplers and 1\\/4 Male NPT Plug

  • 4-Way air manifold and Splitter with 1/4-inch couplers.
  • Durable and lightweight aluminum construction.
  • High corrosion resistance for longer life and smoother operation than standard couplers.
  • 1/4-inch body plug input with a 1/4-inch body industrial interchange couplers output.
  • Industrial interchange compatible with industrial, "m", "D" and "I/m" style plugs and couplers.
Check Stock

Shappy Plastic Standard Couplers Cake Decorating Coupler Pipe Tip Coupler for Icing Nozzles White 6 Pack

  • Standard couplers: these white couplers are 3 cm/ 1.2 inch long, and their base' diameters are 2.5 cm/ 1 inch, fit for standard-size icing nozzles.
  • Usable range: the standard coupler fits all decorating bags and standard-size tips, helps you change piping tips without unnecessarily wasting bags or....
  • Simple to use: cut a tiny hole in the bag corner, insert this plastic coupler, then attach the tip and screw on the ring, after done, remove the tip....
  • Durable and practical: the pipe tip couplers are made of quality plastic, with sturdy construction, make you decorate cake and cookie conveniently and....
  • Quantity: 6 x cake decorating couplers, enough for different usages, you can change similar sized tubes without emptying the contents of the....
Check Stock

Shappy Plastic Standard Couplers Cake Decorating Coupler Pipe Tip Coupler for Icing Nozzles, White (12 Pieces)

  • Standard couplers: these white couplers are 3 cm/ 1.2 inch long, and their base' diameters are 2.5 cm/ 1 inch, fit for standard-size icing nozzles.
  • Usable range: the standard coupler fits all decorating bags and standard-size tips, helps you change piping tips without unnecessarily wasting bags or frosting.
  • Simple to use: cut a tiny hole in the bag corner, insert this plastic coupler, then attach the tip and screw on the ring, after done, remove the tip and coupler, wash them clean.
  • Durable and practical: the pipe tip couplers are made of quality plastic, with sturdy construction, make you decorate cake and cookie conveniently and quickly.
  • Quantity: 12 x cake decorating couplers, enough for different usages, you can change similar sized tubes without emptying the contents of the decorating bag.
Check Stock

DERNORD 1” Female Bulkhead Water Tank Connector Stainless Steel Bulkhead Fittings

  • Female Bulkhead is made of SS304, strength, corrosion resistance, high temperature ductility and low permeability, tightly threaded to prevent penetration, smooth edges..
  • The lock nut is reverse-threaded, it is easy to install and the connection is firmer with rubber gasket.
  • Silicone seal gasket will contour to the shape of the round barrels..
  • Bulkhead Fitting is widely used for home and commercial Plumbing, Water Tank, Aquariums, Reef tank, Irrigation, Swimming pools, Water parks, etc..
  • Package includes a SS304 body, one rubber gasket and one locking nut..
Check Stock