...e a strong water flow by relying on pressure from the water in your rain barrel. The 3/4" spigot is threaded for easy use with a hose- no need to haul buckets or watering cans..
NO LEAKS. The attached washer and silicone tape provide a perfect waterproof seal, and the bulkhead fitting and spigot are reverse-threaded, and self tighten- which ensures the spigot will not accidentally loosen from use, and will hold a tight seal over multiple seasons..
INSTALLATION SO QUICK, YOU'LL BARELY HAVE TIME TO GET YOUR DRILL OUT. The bulkhead fitting and spigot are reverse-threaded, and are tightened from the outside of the barrel- no need to fiddle inside with a wrench. Simply drill a hole, and thread the attached wire down through the hole then slide the bulkhead fitting down the wire as a guide- works well for barrels with and without open top design. The product also comes with a detailed, illustrated guide..
HEAVY-DUTY, DURABLE CONSTRUCTION. From using a brass ball valve and body and aluminum handle (with orange paint spray), this spigot is built for longevity. The spigot also contains less than 0.25% lead, compliant with ....
Hilangsan 1.5\ Tri Clamp Weldless Bulkhead Stainless Steel Compression Bulkhead Fittings Homebrew Kettle Bulkhead 1.5 inch TC Bulkhead for Brew Kettle
【Welding-Free Design】Only need to drill a 41 mm hole in the kettle, then the 1.5" TC bulkhead can be installed on the most brew kettle without welding. Add a TC port to your brew kettle easily..
【304 Stainless Steel】The 1.5 inch bulkhead fitting is made of 304 stainless steel, anti-rust, high-temperature resistance, high-pressure resistance. The Polishing treatment makes the surface look more refined..
【Food Grade O-Ring】A high-temperature resistant silicone O-ring is included. The O-ring has the perfect thickness and density to properly seal on the curved face of a brew kettle without leaking..
【Applicable Size】This bulkhead compression fitting is suitable for 1.5 inch triple clamp. It is suitable for coke kegs, soda kegs, beer kegs, kettles, etc. as small as 12 inches in diameter..
【Quality Service】We are committed to providing you with high-quality and reliable products. If you have any questions, you can tell us at any time. We will definitely solve it for you!.
(2 pack)Hilangsan 1.5\ Tri Clamp Weldless Bulkhead Stainless Steel Compression Bulkhead Fittings Homebrew Kettle Bulkhead 1.5 inch TC Bulkhead for Brew Kettle
【304 Stainless Steel】The 1.5 inch bulkhead fitting is made of 304 stainless steel, anti-rust, high-temperature resistance, high-pressure resistance. The Polishing treatment makes the surface look more refined..
【Welding-Free Design】Only need to drill a 41 mm hole in the kettle, then the 1.5〃TC bulkhead can be installed on the most brew kettle without welding. Add a TC port to your brew kettle easily..
【Food Grade O-Ring】A high-temperature resistant silicone O-ring is included. The O-ring has the perfect thickness and density to properly seal on the curved face of a brew kettle without leaking..
【Applicable Size】This bulkhead compression fitting is suitable for 1.5 inch tri clamp. It is suitable for coke kegs, soda kegs, beer kegs, kettles, etc. as small as 12 inches in diameter..
【Quality Service】We are committed to providing you with high-quality and reliable products. If you have any questions, you can tell us at any time. We will definitely solve it for you!.
DERNORD 1” Female Bulkhead Water Tank Connector Stainless Steel Bulkhead Fittings
Female Bulkhead is made of SS304, strength, corrosion resistance, high temperature ductility and low permeability, tightly threaded to prevent penetration, smooth edges..
The lock nut is reverse-threaded, it is easy to install and the connection is firmer with rubber gasket.
Silicone seal gasket will contour to the shape of the round barrels..
Bulkhead Fitting is widely used for home and commercial Plumbing, Water Tank, Aquariums, Reef tank, Irrigation, Swimming pools, Water parks, etc..
Package includes a SS304 body, one rubber gasket and one locking nut..
DERNORD 3/4” Female Bulkhead Water Tank Connector Stainless Steel Bulkhead Fittings
Female Bulkhead is made of SS304, strength, corrosion resistance, high temperature ductility and low permeability, tightly threaded to prevent penetration, smooth edges..
The lock nut is reverse-threaded, it is easy to install and the connection is firmer with rubber gasket.
Silicone seal gasket will contour to the shape of the round barrels..
Bulkhead Fitting is widely used for home and commercial Plumbing, Water Tank, Aquariums, Reef tank, Irrigation, Swimming pools, Water parks, etc..
Package includes a SS304 body, one rubber gasket and one locking nut..
KOOTNAS 2-Pack Solid Brass Bulkhead Fittings 1/4 NPT Taper Female 3/4 Straight Male Thread Brass Water Tank Connector with 4 Rubber Rings 4 Silicone Rings for Tank Body Wooden Barrels etc
【Size】- Female thread: 1/4 NPT taper thread.
Male thread: 3/4 inch straight thread. Please confirm that our products are suitable for your project before buying..
【Material】- Made of high quality brass. Durable, smooth and deep internal and external threads, rust proof, easy to connect. More reliable than aluminum or plastic materials..
【Good Sealing 】- 2 pieces 1/4 NPT female x 3/4" straight male brass tank fittings with 4 rubber rings and 4 silicone rings, you can install the o-rings as needed, they can provide better sealing on both sides of the bulkhead without leakage..
【Where Used】- Commonly used in the water barrels, water tank, self-made liquid storage bucket and other bulkhead sealing projects, etc..
【What Can You Get】- 2 pieces brass bulkhead tank fittings with rubber and silicone rings, Friendly Customer Service. If you are not satisfied with this product, please don’t hesitate to contact us, we will supply 100% Money Back, ensure your no risking purchasing..
