Ade Advanced Optics Red Dot Mounting Plate/Base/Adapter for Vortex Venom/Razor/Viper Burris Fastfire,Meopta,Docter Insight to FIT Sig Sauer Standard P320
This brand new designed optic mounting plate is to REPLACe the rear sight of pistol. Specially made to fit Sig Sauer Standard P320 Handgun..
Only fits standard P320 and P320 compact. It does NOT fit special edition like XCarry, ProCuts, X-5, XCompact, M17, M18 ext(see other listings from....
Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium)Red dots..
Also Fit Vortex Venom/Razor/Viper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark Minishot and similar red dots..
Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation..
Ade Advanced Optics RD3-006A Green Dot Micro Mini Reflex Sight for Handgun
Fully windage and elevation adjustable and lockable.
Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 battery(Included).It is also compatible with varies handgun mounting plates that replace rear sight dovetail..
This Huracan Green Dot Sight fits directly to Optics Ready pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP. It also fits Canik using Canik provided mount marked for Doctor/Venom type red dot..
However the front switch of the sight needs to trim down 2mm depends on exact pistol model if the pistol’s pre-cut is very short...
Comes with an removable picatinny mounting base to attach to any thing with piatinny rail. Fully windage and elevation adjustable and lockable.
Unlimited Eye Relief. Powered by a lithium CR2032 battery.
ADE RD3 006,RD3 009,RD3 012,RD3 013,RD3 015 are designed to fit the slide/footprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS.Any Plate made for those brands also fits this sight..
Ade Advanced Optics RD3-006B Green Dot Micro Mini Reflex Sight for Handgun with Removeable Pictinny Base
We have made several improvements since it’s initial release in 2016. We have made it more durable to withstand recoil and improved the ability to hold zero. Newly updated front switch designed in Oregon..
Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture..
This GREEN dot comes with a picatinny mounting base. It is also compatible with varies handgun mounting plates that replace rear sight dovetail. It is also compatible to Optics Ready pistols such as Glock MOS, Springfield OSP,.
3 MOA. Fully windage and elevation adjustable and lockable.
Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 battery(Included).
Ade model RD3-006,RD3-009,RD3-012,RD3-013,RD3-015 are designed to fit the slide/footprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS. Any Plate made for those brands also fits this sight..
Ade Advanced Optics Picatinny Mounting Plate/Adapter/Mount - Compatible with Trijicon RMR ADE Stingray Holosun HS407C/HS507C/HS508T Red Dot Sight…
This Optic converter/adapter plate is made for any pistol slide that has a trijicon rmr optic cut, or optic plate can ONLY accept a trijicon rmr/sro....
Simply attach this adapter plate on the existing trijicon rmr optic cut as a regular optic plate. Screws are provided for over 25 popular red dot....
This adapter plate allow user to attach ADE RD3-006, RD3-09, RD3-012, RD3-013, RD3-018, RD3-019, Vortex Venom/Viper, Burris Fastfire 123, Sightmark....
Also compatible with Leica Tempus, Sig Romeo, Shield RMS/RMSC, Jpoint red dot sights..
Made in USA. This is the ONLY adapter(Made by ADE OPTICS) on the market to convert any pistol optic cut/plate that is with a trijicon rmr footprint,....
Ade Advanced Optics Crusader RD3-009 Red Dot Reflex Sight + Optic Mounting Plate for Ruger Mark I,II,III,IV,IV-Lite,Mark 1,2,3,4 + Picatinny Plate
This mounting plate is designed to connect red dot sights to Ruger Mark I, II, III, IV, IV-Lite, 22/45 pistol by attaching to the two holes on top of....
Comes with one picatinny mounting plate and one ruger plate. No need to replace the rear sight and allowing user to co-witness the rear sight. Scroll....
Fully windage and elevation adjustable and lockable.
Unlimited Eye Relief. 5 MOA. 5 Illumination Settings. Powered by a lithium CR2032....
The red dot is designed to fit the slide/footprint on the cut made for Vortex Venom, Burris Fastfire, Meopta, Docter, Insight..
Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture..
Ade Advanced Optics Huracan Green Dot Micro Mini Reflex Sight for Handgun
We have made several improvements since it's initial release in 2016. We have made it more durable to withstand recoil and improved the ability to hold zero. Designed in Oregon.This GREEN dot comes with a picatinny mounting base..
Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.This GREEN dot comes with a picatinny mounting base. Other handgun mounting plates are not included..
It is fits directly to "Optics Ready" pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP. It also fits Canik using Canik provided #1 mount, however the front switch of the sight needs to trim down 2mm..
3 MOA. Fully windage and elevation adjustable and lockable.
Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 battery(Included).It is also compatible with varies handgun mounting plates that replace rear sight dovetail..
ADE RD3-006,RD3-009,RD3-012,RD3-013,RD3-015 are designed to fit the slide/footprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS.Any Plate made for those brands also fits this sight.RD3-011 only Fits Trijicon ftprt.
Ade Advanced Optics Red Dot Adapter Mounting Plate/Base/Convertor for Vortex Venom/Razor/Viper Burris Fastfire,Meopta,Docter Insight to FIT Sig Sauer P365XL / P365X Handgun
The existing optic cut on Sig P365XL and P365X only fits Shield RMS and ADE RD3-018 SPIKE footprint red dot, the existing optic cut does not allow red....
This Plate does NOT fit base/standard Sig P365 which does not has a optic cut. This plate does NOT fit red dot footprint such as trijicon rmr, shield....
Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium)Red dots..
Also Fit Vortex Venom/Razor/Viper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark Minishot and similar red dots. It does NOT fit the....
Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation. We highly recommend DIY only if....
Ade Advanced Optics Red Dot Sight 45 Degree Offset Mount Compatible With Shield RMS/RMSc/SMS/SMSc, ADE RD3-018 SPIKE, RD3-021 NUWA, Leupold Deltapoint Pro, Holosun 407K/507K,Vortex Venom/Viper Red Dot
The ADE HM8 optic mount allows the user to mount a varieties of Red Dots at a 45 degree angle alongside your primary magnified optic for optimal aiming versatility when the situation gets up close and personal..
The ADE HM8 optic mount attaches to either side of a Picatinny rail to accommodate left or right handed shooters..
Compatible with Any red dot with footprint of with Doctor footprint, such as Vortex Venom/Viper, Burris Fastfire, ADE RD3-006, RD3-009, RD3-012, RD3-013, RD3-015 red dots.
Compatible with Any red dot with footprint of Triijicon rmr footprint, such as holosun 407c/507c, ADE RD3-020, RD3-023..
Compatible with Any red dot with footprint of Shield RMS/RMSc footprint, such as Leopold Deltapoint Pro, Sig Romeo Zero, Hex Wasp, Swampfox Sentinel.
Ade Advanced Optics Delta RD3-012 Red Dot Reflex Sight + Optic Mounting Plate for SW Smith Wesson MP/MP 2.0 Shield Pistol and Also a Standard Picatinny Mount
Comes with an removable standard picatinny mount and handgun mount(replace rear sight) fits CERTAIN SW models such as Smith & Wesson M&P Full Size, M&P 2.0 Full Size, M&P 22 Full Size, M&P Compact, M&P 2.0 Compact, SD9VE,SD40VE, M&P Shied.
The pistol mount included for SW does NOT fit Smith & Wesson M&P C.O.R.E Series (Already optics ready), M&P Shield EZ .380, M&P .22 Compact, SW9VE, SW40VE, SW40, SW9, Sigma, 1911.
1.75″ length x1.25″ width x1.15″ height. Shockproof, Fogproof and waterproof for 30 minutes under 4ft water.Feature 1 M.O.A wind age and elevation adjustments with audible click.
The red dot is also compatible with Ade handguIt is designed to fit the slide/footprint on the cut made for Vortex Venom, Burris Fastfire, Meopta, Docter, Insight. Red dot has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same brightness level last time it was turned off.
Top load System, no need to Remove the sight to change the Battery. 6 MOA dot. Come with Protected Cover, Adjustment wrench, Adjustment dialing plate, User Manual, Installation screws and Picatinny mounting plate..
