Best Burris Fastfire Offset Mount

DPP Titanium Red Dot Mount/Plate/Adapter Compatible with Springfield XD Trijicon RMR/SRO&Holosun 407C/507C/508T

  • This Optic converter/adapter plate is made for any pistol slide that has a trijicon rmr optic cut, or optic plate can ONLY accept a trijicon rmr/sro....
  • Simply attach this adapter plate on the existing trijicon rmr optic cut as a regular optic plate. Screws are provided for over 25 popular red dot....
  • This adapter plate allow user to attach ADE RD3-006, RD3-09, RD3-012, RD3-013, RD3-018, RD3-019, Vortex Venom/Viper, Burris Fastfire 123, Sightmark....
  • Also compatible with Leica Tempus, Sig Romeo, Shield RMS/RMSC, Jpoint red dot sights..
  • Made in USA. This is the ONLY adapter(Made by ADE OPTICS) on the market to convert any pistol optic cut/plate that is with a trijicon rmr footprint,....
Check Stock

Ade Advanced Optics RD3-006B Green Dot Micro Mini Reflex Sight For Handgun

  • We have made several improvements since it’s initial release in 2016. We have made it more durable to withstand recoil and improved the ability to hold zero. Designed in Oregon..
  • Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture..
  • This GREEN dot comes with a picatinny mounting base. It is also compatible with varies handgun mounting plates that replace rear sight dovetail. It is also compatible to Optics Ready pistols such as Glock MOS, Springfield OSP,.
  • 3 MOA. Fully windage and elevation adjustable and lockable.
  • Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 battery(Included).
  • Ade model RD3-006,RD3-009,RD3-012,RD3-013,RD3-015 are designed to fit the slide/footprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS. Any Plate made for those brands also fits this sight..
Check Stock

Ade Advanced Optics Optics Delrin Shims 1.0 Degree for Vortex Venom & Viper Burris Fastfire II III,Red dot Sight

  • Optic Shim is made to fit between the red dot and the mounting plate. Depending on the handgun, some handguns need THIS 1degree shim to give extra....
  • Do not return your "defective" red dot that can't adjust the illuminated dot high enough to zero. This optic shim solves the problem by raising the....
  • Fits: Vortex Venom & Viper, Burris Fastfire II, III, Docter Red Dot Sight, Insight, Eotech MRDS, Sightmark minishot, Meopta. All trademarks mentioned....
  • Also Fits: Ade Advanced Optics RD3-006, RD3-009, RD3-011, RD3-012, RD3-013, RD3-015. The center two screw holes might be 1 or 2mm off for some red....
  • What it does? While zeroing the red dot sight, some users turned the elevation screw all the way to the end that can no longer turn(screw maxed-out),....
Check Stock

Ade Advanced Optics RD3-006B-2 Green Dot Micro Mini Reflex Sight for Handgun …

  • We have made several improvements since it's initial release in 2016. We have made it more durable to withstand recoil and improved the ability to hold zero. Newly updated front switch designed in Oregon..
  • Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture..
  • This GREEN dot comes with a picatinny mounting base. It is also compatible with varies handgun mounting plates that replace rear sight dovetail. It is also compatible to Optics Ready pistols such as Glock MOS, Springfield OSP,.
  • 4 MOA. Fully windage and elevation adjustable and lockable.
  • Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 battery(Included).
  • Ade model RD3-006,RD3-009,RD3-012,RD3-013,RD3-015 are designed to fit the slide/footprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS. Any Plate made for those brands also fits this sight..
Check Stock

Ade Advanced Optics 2020 Red Dot Mounting Plate/Base/Adapter for Vortex Venom/Razor/Viper Burris Fastfire,Meopta,Docter Insight to FIT Steyr A1 Pistol

  • This brand new designed optic mounting plate is to REPLACe the rear sight of pistol. Specially made to fit Steyr A1 Handgun..
  • compatible with S-A1 C-A1 M-A1 L-A1 M9-A1. Fitment on A2 is not guaranteed due to different Rear sight dovetail dimension..
  • Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium)Red dots..
  • Also Fit Vortex Venom/Razor/Viper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark Minishot and similar red dots..
  • Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation..
Check Stock

Ade Advanced Optics Ruger Mark I II III Mark 1,2,3,4 Red-Dot Sight Mount Fit Vortex Venom Docter Burris Fastfire Optics

  • This mounting plate is designed to connect red dot sights to Ruger Mark I, II, III, IV, IV-Lite, 22/45 pistol. For Mark I and II, confirm it has....
  • Also fit Doctor, Vortex Venom/Razor/Viper, Burris Fastfire, Meopta, Eotech mrds, , Insight red dots..
  • Mounting hardware comes with screws and allen wrench. For Mark I and II, confirm it has drilled/tapped holes. Plate will not work without holes..
  • Mounting hardware comes with screws and allen wrench. Aircraft grade Aluminum in Matte black finish. Mounting hardware comes with screws and allen....
  • This optic plate is designed to attach to the two existing holes on the top of Ruger Mark Slide. No need to replace the rear sight and allowing user....
Check Stock

Ade Advanced Optics 2020 Red Dot Mounting Plate/Base/Adapter for for Vortex Venom/Razor/Viper Burris Fastfire,Meopta,Docter Insight to FIT Sig Sauer Standard P365

  • This brand new designed optic mounting plate is to REPLACe the rear sight of pistol. Specially made to fit Sig Sauer Standard P365 Handgun..
  • Only fits Sig Sauer standard P365 Model. It does NOT fit P365XL which is already Optics Ready..
  • Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium)Red dots..
  • Also Fit Vortex Venom/Razor/Viper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark Minishot and similar red dots..
  • Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation..
Check Stock

Ade Advanced Optics Red Dot Mounting Plate/Base/Adapter for Vortex Venom/Razor/Viper Burris Fastfire,Meopta,Docter Insight to FIT Sig Sauer Standard P320

  • This brand new designed optic mounting plate is to REPLACe the rear sight of pistol. Specially made to fit Sig Sauer Standard P320 Handgun..
  • Only fits standard P320 and P320 compact. It does NOT fit special edition like XCarry, ProCuts, X-5, XCompact, M17, M18 ext(see other listings from....
  • Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium)Red dots..
  • Also Fit Vortex Venom/Razor/Viper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark Minishot and similar red dots..
  • Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation..
Check Stock

Ade Advanced Optics RD3-006B Green Dot Micro Mini Reflex Sight for Handgun with Removeable Pictinny Base

  • We have made several improvements since it’s initial release in 2016. We have made it more durable to withstand recoil and improved the ability to hold zero. Newly updated front switch designed in Oregon..
  • Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture..
  • This GREEN dot comes with a picatinny mounting base. It is also compatible with varies handgun mounting plates that replace rear sight dovetail. It is also compatible to Optics Ready pistols such as Glock MOS, Springfield OSP,.
  • 3 MOA. Fully windage and elevation adjustable and lockable.
  • Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 battery(Included).
  • Ade model RD3-006,RD3-009,RD3-012,RD3-013,RD3-015 are designed to fit the slide/footprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS. Any Plate made for those brands also fits this sight..
Check Stock

Ade Advanced Optics Picatinny Mounting Plate/Adapter/Mount - Compatible with Trijicon RMR ADE Stingray Holosun HS407C/HS507C/HS508T Red Dot Sight…

  • This Optic converter/adapter plate is made for any pistol slide that has a trijicon rmr optic cut, or optic plate can ONLY accept a trijicon rmr/sro....
  • Simply attach this adapter plate on the existing trijicon rmr optic cut as a regular optic plate. Screws are provided for over 25 popular red dot....
  • This adapter plate allow user to attach ADE RD3-006, RD3-09, RD3-012, RD3-013, RD3-018, RD3-019, Vortex Venom/Viper, Burris Fastfire 123, Sightmark....
  • Also compatible with Leica Tempus, Sig Romeo, Shield RMS/RMSC, Jpoint red dot sights..
  • Made in USA. This is the ONLY adapter(Made by ADE OPTICS) on the market to convert any pistol optic cut/plate that is with a trijicon rmr footprint,....
Check Stock